Search

The use of ion sources in induction linacs for heavy ion fusion is fundamentally different from their use in the rf linac‐storage rings approach. Induction linacs require very high current, short pulse extraction usually with large apertures which are dictated by the injector design. One is faced with the problem of extracting beams in a pulsed fashion while maintaining high beam quality during the pulse (low emittance). Four types of sources have been studied for this application. The vacuum arc and the rf cusp field source are the plasma‐types and the porous plug and hot alumino–silicate surface source are the thermal types. The hot alumino–silicate potassium source has proved to be the best candidate for the next generation of scaled experiments. The porous plug for potassium is somewhat more difficult to use. The vacuum arc suffers from noise and lifetime problems and the rf cusp field source is difficult to use with very short pulses. Operational experience with all of these types of sources is prese...

A 2 MV, 800 mA, K+ injector for heavy-ion fusion studies is under construction. This new injector is a one-beam version of the proposed 4-beam ILSE injector. A new 36-module MARX is being built to achieve a 5 μs flat top. The high-voltage generator is stiff (

An update on the development of the 500-mA/beam sixteen-beam injector being built at Lawrence Berkeley Laboratory is presented. An inductively graded Marx bank provides the acceleration potential on the electrostatic column. A carbon arc source provides the pulsed current for the injector. Recent results on extracted beam parameters, column performance, generator performance and system design changes are reported. The carbon ion beam is diagnosed with Faraday cups and with a double-slit emittance measurement system. Controls for the final machine are also discussed. >

A program is underway to construct a 2 MV, 800 mA, K/sup +/ injector for heavy ion fusion. The electrostatic quadrupole injector configuration consists of a zeolite source, a diode of up to 1 MV, together with several electrostatic quadrupole units to simultaneously focus and accelerate the beam to 2 MV. The key issues of source technology, high voltage breakdown, beam aberrations, and transient effects are discussed. Results from ongoing experiments and simulations are presented. >

We report on three experiments performed in connection with the 2MV electrostatic quadrupole (ESQ) injector under construction at Lawrence Berkeley Laboratory. Scaled experiments have been conducted to study possible beam emittance growth due to beam aberrations in an ESQ injector. The experiment uses the SBTE (Single Beam Transport Experiment) accelerator system, quarter-scale ESQ set-up and a potassium ion diode source. Measured emittance growth changes significantly with variations in current and diode energy, in good agreement with theoretical predictions. In addition, beam transport experiments were performed in a 1MV axisymmetric electrostatic aperture column using a zeolite 1″ diameter potassium ion source. Experimental measurements in good agreement with 2-1/2D simulations showed that low-emittance beams can be produced in axisymmetric structures. Finally, ESQ breakdown voltage tests without beam were performed at up to two times the quadrupole working voltage.