Search

The krypton-fluoride Nike laser delivers up to 2 KJ in 248 nm ultraviolet radiation to planar targets with the most uniform illumination of all existing high-energy lasers for inertial confinement fusion (ICF) research. That, combined with high-resolution monochromatic x-ray imaging pioneered at NRL in the 1990s and the recently added two-dimensional (2D) VISAR diagnostics, provides a unique platform for experimental studies of hydrodynamic phenomena important to the inertial confinement fusion (ICF). These include absolute experimental determination of the primary Hugoniots of low-density plastic foams in the Mbar pressure range. Although foam materials have many uses for the manufacturing of ICF targets ranging from laser fusion to Z-pinch-driven dynamic hohlraums, no experimental data on their shock compressibility in the ICF-relevant pressure range was available until our experiments. We describe the first systematic experimental study of the nonlinear, multi-mode perturbation evolution triggered by localized target non-uniformities, such as straight grooves and dots, which emulate fill tubes, tents, and other target-mounting structures in laser capsules. The experimental data turned out to be counter-intuitive and challenging for simulations. Finally, the 2D VISAR snap-shot images of the shock velocity field made it possible to directly measure the roughness of a uniformly driven shock front propagating into the target, which is caused by ISI-smoothed laser imprint. Initial measurements for planar CH targets with and without thin high-Z layers added for the imprint mitigation have been successfully performed. [ABSTRACT FROM AUTHOR]

The U.S. Naval Research Laboratory (NRL) has built a 137 J electron beam pumped argon fluoride (ArF) laser operating at 193 nm utilizing the Electra facility. This paper highlights initial ArF oscillator measurements in the context of significant benefits of ArF laser characterization for inertial confinement fusion target performance and development of a kinetics code with predictive capabilities. Other aspects of NRL's ArF laser development program, including large scale electron beam pumped ArF amplifier development and ArF optical transport, are discussed. Initial measurements were made utilizing a quadruple pass oscillator configuration constructed in the Electra facility with a nominal 100 cm2 aperture. Laser yields between 80 and 100 J, time-dependent laser intensity, and amplified spontaneous emission (ASE) are reported over a range of gas pressure (0.8–1.4 atmospheres). Higher laser yields, 137 J, were attained in a non-optimized dual ArF oscillator configuration wherein the optical axis was rotated to conform to the measured electron beam deposition in the laser gas mixture. [ABSTRACT FROM AUTHOR]

The scattering of laser light due to cross-beam energy transfer (CBET) is an undesirable process in direct-drive inertial confinement fusion (ICF) that degrades both the compression and symmetry of the imploding target. Here, we present results from laser-plasma interaction simulations performed with the wave-based code LPSE that explore two techniques for suppressing CBET in frequency-tripled, Nd:glass laser beams crossing in a transonic plasma: a.) frequency detuning using two or three discrete "colors" of narrowband laser light; and b.) broad laser bandwidth. We find that for beams modeled with random speckle patterns, distributed phase plates and polarization smoothing, and for plasma conditions similar to those on the National Ignition Facility, the former method reduces CBET to an extent, but the degree of mitigation plateaus once the frequency separation greatly exceeds the resonance width of the CBET instability. Broadband lasers, on the other hand, are predicted to suppress CBET completely at a bandwidth of about 8 THz (Δ ω / ω 0 ≃ 1%, where Δ ω /2 π and ω 0 are the laser bandwidth and angular frequency, respectively) for the same conditions. Although the Nd:glass lasers used for ICF research today have bandwidths far below this value, the spectra from such lasers could likely be broadened to multi-terahertz levels by utilizing stimulated rotational Raman scattering in a gaseous diatomic medium. Alternatively, the required bandwidth could be obtained with an excimer laser driver such as argon-fluoride, which has a native bandwidth in excess of 7 THz. Either of these two options would enable higher and more symmetric ablation pressures in future, direct-drive, ICF target designs. [ABSTRACT FROM AUTHOR]