Search

The issues reported in this article concern the development of methods applied for measurement, processing, and analysis of infrasound signals generated in association with the operation of wind farms. In particular, the discussion involves the results of the analysis using synchrosqueezed wavelet transforms of infrasound noise emitted by a 2 MW wind turbine that have been recorded during its operation in actual conditions. To record infrasound signals, a wireless measurement system was used, consisting of a base station and three synchronized mobile recording stations. To identify the wavelet structures with the highest ratio of energy, the synchrosqueezed wavelet transforms were used, and the courses of six time runs representing instantaneous frequencies were determined. Application of this approach enables the selection of energy-dominant waveforms from the time-frequency images, whose assessment can be performed mainly in terms of qualitative measures. Application of the synchrosqueezed wavelet transform is an effective tool for the purposes of detection and selection in the designated wavelet structures for the recorded infrasound dominant frequencies for which the carried energy ranges have the highest value. [ABSTRACT FROM AUTHOR]

Copyright of Przegląd Elektrotechniczny is the property of Przeglad Elektrotechniczny and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The research reported in this paper involves the development and refinement of methods applicable to the measurement and analysis of infrasound signals generated by the operation of wind turbines. In particular, the presentation focuses on the use of a new system that is applied for simultaneous recording of acoustic signals in the low-frequency range emitted by wind farms in three independent and identical measurement setups. A comparative analysis of the proposed new system was made with the Brüel & Kjaer measurement, a commonly used methodology, which meets the requirements of the IEC 61400-11 standard. The paper focuses on the results of frequency and time-frequency analysis of infrasound signals recorded throughout the operation of a wind turbine with a rated capacity of 2 MW. The use of a correlated system with three simultaneous measurement systems can be a new and alternative measurement method that will eliminate the drawbacks of previous approaches. [ABSTRACT FROM AUTHOR]

The development of wind energy and the increasing number of installed wind turbines make it necessary to assess them in terms of the nuisance of the emitted infrasound noise generated by such devices. The article presents the results of measurements and analyses of infrasound emitted during the operation of wind turbines installed in various locations in Poland. Comparative analysis of noise levels in the infrasound and audible range has shown that acoustic energy is mainly in the low and infrasound frequency range, and the measured levels depend significantly on the weighting curves used. On the basis of the results, it was confirmed that the sound pressure level of infrasound signals emitted by the operation of high-power wind turbines, regardless of wind velocity, weather conditions, design solutions of turbines, operating time, rated capacity, does not exceed the criteria specified in the applicable legislation dealing with the assessment of infrasound noise on the working environment. [ABSTRACT FROM AUTHOR]

The study reported in this paper is concerned with areas related to developing methods of measuring, processing and analyzing infrasound noise caused by operation of wind farms. The paper contains the results of the correlation analysis of infrasound signals generated by a wind turbine with a rated capacity of 2 MW recorded by three independent measurement setups comprising identical components and characterized by the same technical parameters. The measurements of infrasound signals utilized a dedicated measurement system called INFRA, which was developed and built by KFB ACOUSTICS Sp. z o.o. In particular, the scope of the paper includes the results of correlation analysis in the time domain, which was carried out using the autocovariance function separately for each of the three measuring setups. Moreover, the courses of the cross-correlation function were calculated separately for each of the potential combinations of infrasound range recorded by the three measuring setups. In the second stage, a correlation analysis of the recorded infrasound signals in the frequency domain was performed, using the coherence function. In the next step, infrasound signals recorded in three setups were subjected to time-frequency transformations. In this part, the waveforms of the scalograms were determined by means of continuous wavelet transform. Wavelet coherence waveforms were calculated in order to determine the level of the correlation of the obtained dependencies in the time-frequency domain. The summary contains the results derived from using correlation analysis methods in the time, frequency and time-frequency domains. [ABSTRACT FROM AUTHOR]

The subject matter of the paper is concerned with improvement in the methods of measuring, processing and analyzing the infrasound noise caused by working wind turbines. The article presents results of measurements and analyses of infrasound signals emitted by work of a wind turbine with 2 MW nominal power, during its normal operation. Infrasounds were recorded at the same time in three independent and identical, in terms of the applied devices, measurement tracks. For the measurements of infrasound signals a dedicated measurement system was used. The measurements were made at variable weather conditions and for different distances between the measurement points and the turbine being examined. In the results part of the paper the following are subsequently presented: the time courses of the recorded infrasound signals, and then courses of the periodograms designated for them in frequencies and the spectrograms calculated for time-frequency data. Special attention was paid to the analysis of the possible application of time-frequency ridge transformation, the application of which enables effective extraction of energy-wise dominant instantaneous frequencies. In the summary, an analysis was made of the results obtained by means of frequency, time-frequency and time-frequency ridge analysis methods. [ABSTRACT FROM AUTHOR]