Search

The cycling and storage performances of LiCoO 2 (LCO)-LiNi 0.5 Co 0.2 Mn 0.3 O 2 (NCM)/pitch-coated silicon alloy-graphite (Si-C) full cells with ethylene carbonate (EC)–based and fluoroethylene carbonate (FEC)–based electrolytes are investigated at elevated temperatures. Excess FEC (used as a co-solvent in LiPF 6 -based electrolytes), which is not completely consumed during the formation of the solid electrolyte interphase (SEI) layer on the electrodes, is prone to defluorination in the presence of Lewis acids such as PF 5 ; this reaction can generate unwanted HF and various acids (H 3 OPF 6 , HPO 2 F 2 , H 2 PO 3 F, H 3 PO 4 ) at elevated temperatures. Our investigation reveals that the HF and acid compounds that are formed by FEC decomposition causes significant dissolution of transition metal ions (from the LCO-NCM cathode) into the electrolyte at elevated temperatures; as a result, the reversible capacity of the full cells reduces because of the deposition of the dissolved metal ions onto the anode. Moreover, we demonstrate possible mechanisms that account for the thermal instability of FEC in LiPF 6 -based electrolytes at elevated temperatures using model experiments.

Lithium difluorophosphate (LiDFP) as a reducible additive is employed to overcome the unsatisfactory rate capability and cycling instability of highly pressed graphite electrodes with high mass loading (8.1 mg/cm2) with a vinylene carbonate (VC)-derived surface film that hampers the charge transport at the graphite–electrolyte interface at high rates. Our investigation reveals that LiDFP modifies the surface chemistry induced by VC and makes a more ionically conductive surface film on graphite, ensuring good rate capability. Keywords: Lithium–ion battery, Graphite, Anode, Electrolyte, Additive

Lithium difluoro(oxalato)borate (LiFOB) is investigated as an additive for enhancing the electrochemical performance of high-voltage lithium cobalt oxide (LiCoO2, LCO)/lithium nickel manganese cobalt oxide (LiNi0.6Co0.2Mn0.2O2, NMC) cathodes and high-capacity silicon/graphite (Si-C) anodes. LCO-NMC/Si-C full cells with a LiFOB additive have been found to exhibit improved high temperature electrochemical performance. To confirm the effects of LiFOB on the cathode and the anode, the surface chemistry of the anodes and cathodes cycled in electrolytes with and without the LiFOB additive are examined using ex-situ X-ray photoelectron spectroscopy (XPS). The LiFOB additive produces a LiF-based solid electrolyte interphase (SEI) on the Si-C anode and a carboxylate-based SEI on the LCO-NMC cathode.

End-group cross-linkable sulfonated poly(arylene ether) polymer (E-SFQK) was synthesized via direct polymerization of potassium 2,5-dihydroxybenzenesulfonate (SHQ) and decafluorobiphenyl (DFBP), followed by a reaction with ethynylphenol (EP). The cross-linking reaction of the ethynyl end group of E-SFQK was performed at 250 °C. After cross-linking, proton conductivity, water uptake, and swelling ratio of cross-linked membrane decreased from 0.16 (noncross-linked membrane) to 0.13 S/cm, from 86% to 42%, and from 31% to 13%, respectively. The effect of cross-linking time on proton conductivity, water uptake, and swelling ratio were also investigated. Methanol permeability of cross-linked membrane was compared with Nafion 117 due to solubility of noncross-linked membranes in methanol. The cross-linked membrane performed better, with a methanol permeability of 88 × 10−8 cm2/s, as compared with 154 × 10−8 cm2/s for Nafion 117. The cross-linked membrane also exhibited improved chemical resistance and oxidative ...

Novel sulfonated poly(arylene ether) copolymers containing cross-linking moiety and fluorine atoms were prepared for proton exchange membranes of fuel cells. The copolymers were synthesized using potassium 2,5-dihydroxybenzenesulfonate (SHQ), 4,4′-(hexafluoroisopropylidene)diphenol (6F-BPA), decafluorobiphenyl (DFBP), and 1-ethynyl-2,4-difluorobenzeneand (CM) as a cross-linking moiety through polycondensation. The chemical structures of the cross-linkable copolymers were analyzed by 1H NMR, 19F NMR, and FTIR-ATR spectra. Cross-linked membranes are obtained by thermal curing of the cross-linkable copolymers. The thermal properties of the cross-linked membranes were characterized by TGA and DSC. Intrinsic viscosity and gel fraction were also evaluated in order to measure the molecular weight and cross-linking density, respectively. The cross-linked network structure greatly suppressed the water uptake and swelling of the cross-linked membrane. The proton conductivity and methanol permeability of the membran...