Search

Wireless power transfer (WPT) is more convenient and safer than conductive charging for power consumer electronics, biomedical devices, transportation systems, etc. Inductive power transfer is the most widely studied and commercialized WPT technique; however, capacitive power transfer (CPT) is becoming an attractive alternative, offering better misalignment tolerance and lower cost and weight. The electrical-field-resonance-based six-plate coupler system is one of the most typical configurations for high-performance CPT systems, but the associated large number of circuit parameters is always a critical issue for system design. In this article, a parameter optimization method is proposed for this topology. The ratio of the reactive power in the compensation network to the system transferred power is set as the main optimization goal. To solve the high-order optimization problem, a two-stage method is proposed to significantly reduce the optimization complexity while providing the optimized parameters of the whole system. To verify the effectiveness of this method, a 3-kW, 1-MHz CPT system with a 16-pF coupling capacitor is built. Both the simulation and experimental results show that the optimized parameters effectively improve the system efficiency, experimentally achieving 95.7% dc–dc overall efficiency under a 100-mm gap distance at the rated power. [ABSTRACT FROM AUTHOR]

With the development of electric vehicles and consumer electronics, wireless power transfer (WPT) is becoming a popular technology. Recently, magnetic resonant coupling has been considered to be the most effective and attractive WPT approach, and the two-coil structure is the most widely used for magnetic resonant coupling. It has been recently reported that the system's energy efficiency can be improved by a three-coil structure. In this paper, the three-coil structure is compared with the two-coil structure based on circuit theory. Simplified circuit models of the two- and three-coil structures are proposed to give a more intuitive and comprehensive analysis of the energy efficiency differences between the two structures. With the simplified model, the condition for a three-coil structure obtaining higher energy efficiency over its two-coil counterpart is derived, and the analysis shows that the WPT system with higher energy efficiency within a wider range of loads can be achieved by properly designed three-coil systems. Additionally, it also shows that the three-coil system has the significant advantage of reducing the current stress and the electromagnetic field emission that is caused by misalignments. The theoretical analysis is confirmed by both simulation and experimental results. [ABSTRACT FROM AUTHOR]