Search

Abstract: One of the major barriers that hinder the application of forward osmosis (FO) processes is the lack of optimized membranes that possess high water flux, low salt leakage and good anti-internal concentration polarization (ICP) and anti-fouling/anti-scaling properties during practical FO operations. In this study, novel composite FO hollow fiber membranes with an RO-like selective skin and an NF-like secondary selective skin were successfully developed for the first time. The fabrication procedures involved making ultrafiltration hollow fiber substrate using poly(amide–imide) (PAI) polymer material via phase inversion method, followed by interfacial polymerization (IP) and chemical modification to yield a polyamide RO-like inner skin and a positively charged NF-like outer skin, respectively. It was found that the sequence of conducting IP on the substrate inner surface prior to the chemical modification of the outer skin was preferred in order to achieve better performance for the resultant double-skinned hollow fibers. The newly developed FO hollow fibers exhibited high water permeability of 2.05L/m2 hbar and 85% rejection to NaCl at 1bar pressure as well as superior FO water flux of 41.3L/m2 h and low ratio of salt flux over water flux of 0.126g/L when using DI water and 2.0M NaCl as feed and draw solutions, respectively, in the active layer facing draw solution (AL-DS) orientation. Furthermore, the experimental results showed that the composite FO hollow fiber membrane was able to outperform single-skinned membrane when the feed contains divalent ions or the feed exhibits high scaling tendency to membrane. This suggested that the integration of RO- and NF-like two selective skins in FO membrane is an effective way to minimize the ICP effect, mitigate the membrane scaling and thus enhance the feasibility of FO processes for practical applications. [Copyright &y& Elsevier]

The use of porous membranes for forward osmosis (FO) applications has been recently reported in the literature. In the current study, a series of porous-FO membranes were fabricated to systematically study the role of membrane separation properties on the FO performance of porous membranes. In addition, two types of draw solutes, a polyelectrolye poly(sodium 4-styrene-sulfonate) (PSS) and a neutral linear polymer polyethylene glycols (PEGs), were evaluated as the draw solutes. The effect of draw solution properties (type of draw solutes, their molecular weight, and concentration) on the FO performance was investigated. Membrane post-treatment at higher annealing temperature was found to increase solute rejection and decrease water permeability. As a result, reverse solute diffusion (RDS) became less severe at higher annealing temperature. The FO water flux of the porous membranes was affected by RDS in addition to the water permeability of the porous FO membranes, both of which had a strong dependence on the annealing temperature. Compared to neutral PEG, the polyelectrolyte PSS was a much better choice for draw solutes with higher FO water flux and lower RDS. The better performance of PSS can be attributed to its higher rejection by the porous FO membranes and its high osmotic pressure compared to PEG at same weight concentration. Implications for the design of porous FO membranes and draw solution are discussed. [ABSTRACT FROM AUTHOR]

Abstract: There has been a resurgence of interest in forward osmosis (FO) as a potential means of desalination, dewatering and in pressure retarded osmosis, which Sidney Loeb was advocating over 3decades ago. This paper describes the characteristics and potential applications of a newly developed FO hollow fiber membrane, which was fabricated by interfacial polymerization on the inner surface of a polyethersulfone (PES) hollow fiber. This FO membrane presents excellent intrinsic separation properties, with a water flux of 42.6L/m2 h using 0.5M NaCl as the draw solution and DI water as the feed with the active layer facing the draw solution orientation at 23°C. The corresponding ratio of salt flux to water flux was only 0.094g/L, which is superior to all other FO membranes reported in the open literature. To evaluate different application scenarios, various NaCl solutions (500ppm (8.6mM), 1wt.% (0.17M) and 3.5wt.% (0.59M)) were used as the feed water to test the performance of the FO membrane. The membrane can achieve a water flux of 12.4L/m2 h with 3.5wt.% NaCl solution as the feed and 2M NaCl as the draw solution, suggesting it has good potential for seawater desalination. [ABSTRACT FROM AUTHOR]

Recent studies have proved the advantages of novel composite membranes in the extractive membrane bioreactor (EMBR) for recalcitrant organic wastewater treatment. However, more systematic research into membrane properties and mass transfer effects are required. This study investigates the role of internal concentration polarization (ICP), including concentrated and diluted ICP, in an aqueous-aqueous extractive process, and the coupled effects of membrane roughness and hydrodynamic conditions on membrane performance in both cross-flow EMBR (CF-EMBR) and submerged EMBR (S-EMBR) processes. To study these factors, a nanofibrous composite membrane with a four-tiered structure, consisting of a dense polydimethylsiloxane (PDMS) selective layer, a polyvinylidene fluoride (PVDF) nanofibrous sublayer, a non-woven mechanical support and a rough micro/nano-beaded layer, has been developed for the EMBR by electrospinning and spray-coating. A diluted ICP, which occurred when the selective layer faces receiving water (SL-R w ), was less severe than a concentrated ICP in the selective layer facing feed (SL-F) orientation. It resulted in higher overall membrane mass transfer coefficients ( k 0 's) in the SL-R w mode during the aqueous-aqueous extractive tests. In addition, less biofilm was observed on the smooth PDMS surface after 14-days CF-EMBR and S-EMBR operations in the selective layer facing biomedium (SL-R bio ) mode. In contrast, in the SL-F mode during EMBR operations, the ridges and valleys on the membrane surface were able to provide a more favourable micro-environment for microorganisms and protect them from external stresses. The mature micro-colonies that developed in the SL-F mode clogged the membrane support and enhanced concentrated ICP, resulting in a significant reduction of k 0 's by more than 58%. Moreover, as the shear force on the membrane surface due to up-flow of air bubbles in the S-EMBR could mitigate the biofilm attachment, the most effective biofilm control strategy found in this study was to operate the nanofibrous composite membrane in the S-EMBR configuration with a smooth selective layer facing the biomedium. This effectively decreased the amounts of protein by 86%, polysaccharides by 88% and total suspended solids (TSS) by 89% in the biofilms on membrane surface, and achieved the highest stable k 0 of 7.0 × 10 −7 m/s. [ABSTRACT FROM AUTHOR]

Abstract: Forward osmosis (FO) has attracted wide interest for its many potential applications. Recent developments suggest that double-skinned FO membranes may perform superiorly over conventional single-skinned ones. In this design, a dense rejection skin facing the draw solution is responsible for the separation, while a second skin facing the feed solution is designed to prevent foulants entering into the porous support layer sandwiched between the two skins. For the first time, an analytical model is developed for double-skinned FO membranes and is verified experimentally. Model simulations suggest that an optimal double-skinned membrane shall have a feed skin similar to that of a low rejection nanofiltration membrane to minimize the overall hydraulic resistant and to reduce internal concentration polarization. On the other hand, the optimization of the draw skin calls for a compromise between its water permeability and solute rejection. FO water flux is greater for support layers with higher mass transfer coefficients. In addition, it decreases with decreasing draw solution concentration and increasing feed solution concentration. While membrane orientation plays an important role for applications with low feed solution concentrations (with the denser skin preferentially facing the draw solution), this effect becomes negligible at high feed solution concentrations. [Copyright &y& Elsevier]

Abstract: Polyamide thin film composite (TFC) membranes with tailored porous substrate and rejection layer are promising for forward osmosis (FO) applications. The current study investigates the effect of rejection layer synthesis conditions on the performance of the resulting TFC polyamide FO membranes. The influence of monomer concentrations (i.e., m-phenylenediamine (MPD) and trimesoyl chloride (TMC) concentrations) on the membrane separation properties as well as FO performance was systematically studied. A strong trade-off between the water permeability and salt rejection was observed, where increasing the TMC concentration or reducing the MPD concentration resulted in higher membrane permeability but lower salt rejection. In FO tests, membranes with poor salt rejection had severe solute reverse diffusion, which enhanced the internal concentration polarization (ICP). It was found that the FO water flux was governed by both the membrane water permeability and its solute rejection. For a membrane with higher water permeability but lower solute rejection, the reduced membrane frictional resistance was compensated by the simultaneously more severe solute-reverse-diffusion-induced ICP. The net effect on the FO water flux depends on the competition of these two opposing mechanisms. Under conditions where solute reverse diffusion may cause severe ICP (e.g., high draw solution concentration and high water flux level), membranes need be optimized to achieve a high salt rejection even if this is at the expense of lower water permeability. [Copyright &y& Elsevier]

Abstract: Forward osmosis (FO) is attracting increasing interest for its potential applications in water and wastewater treatment and desalination. One of the major drawbacks of FO is internal concentration polarization (ICP), which significantly limits the FO flux efficiency. In addition, FO membrane flux can be adversely affected by membrane fouling. The effects of ICP and fouling on FO flux behavior were systematically investigated in the current study. Both theoretical model and experimental results demonstrated that the FO flux was highly non-linear with respect to the apparent driving force (the concentration difference between the draw solution and the feed water) as a result of ICP. ICP played a dominant role on FO flux behavior at greater draw solution concentrations and/or greater membrane fluxes due to the exponential dependence of ICP on flux level. Compared to the active layer facing draw solution (AL-facing-DS) configuration, more severe ICP was observed when the membrane active layer faced the feed water (AL-facing-FW) as a result of dilutive ICP in the FO support layer. Interestingly, the AL-facing-FW configuration showed remarkable flux stability against both dilution of the bulk draw solution and membrane fouling. In this configuration, any attempt to reduce membrane flux was compensated by a reduced level of ICP. The net result was only a marginal flux reduction. In addition, foulant deposition was insignificant in this configuration. Thus, the AL-facing-FW configuration enjoyed inherently stable flux, however, at the expense of severer initial ICP. In contrast, the AL-facing-DS configuration suffered severe flux reduction as porous membrane support faced the humic acid containing feed water. The flux loss in this configuration was likely due to the combined effects of (1) the internal clogging of the FO support structure as well as (2) the resulting enhanced ICP in the support layer. The latter was caused by reduced porosity and reduced mass transfer coefficient of the support. The pore clogging enhanced ICP mechanism probably played a dominant role in FO flux reduction at higher flux levels. To the authors’ best knowledge, this is the first study to systematically demonstrate the coupled effects of ICP and fouling on the FO flux behavior. [Copyright &y& Elsevier]