Search

This paper explores a utility-scale photovoltaic (PV) plant configuration based on a dc–dc stage interfaced directly to a modular multilevel converter (MMC) used for an HVdc power station. Since PV systems are dc by nature, the proposed solution has several advantages, such as full dc operation and step-up transformers avoidance with modular and reliable configuration. The contributions of this paper are the experimental validation of the proposed utility-scale configuration, while the conventional modulation stage has been further enhanced by including an adaptive phase-shifted modulation allowing improved voltage and current waveforms injected to dc grid under unbalanced power string operation. The enhanced performance is obtained by reducing the carrier frequency component of the converter voltage, generating an improved voltage ripple. Finally, experimental validation during steady-state and dynamic operation are presented to illustrate the behavior of the dc–dc MMC converter managed by the proposed modulation and control scheme. [ABSTRACT FROM PUBLISHER]

The cost reduction of power-electronic devices, the increase in their reliability, efficiency, and power capability, and lower development times, together with more demanding application requirements, has driven the development of several new inverter topologies recently introduced in the industry, particularly medium-voltage converters. New more complex inverter topologies and new application fields come along with additional control challenges, such as voltage imbalances, power-quality issues, higher efficiency needs, and fault-tolerant operation, which necessarily requires the parallel development of modulation schemes. Therefore, recently, there have been significant advances in the field of modulation of dc/ac converters, which conceptually has been dominated during the last several decades almost exclusively by classic pulse-width modulation (PWM) methods. This paper aims to concentrate and discuss the latest developments on this exciting technology, to provide insight on where the state-of-the-art stands today, and analyze the trends and challenges driving its future. [ABSTRACT FROM PUBLISHER]

This paper proposes and validates model predictive control as an alternative control strategy for H-bridgeneutral-point-clamped (H-NPC) converters for single-phase grid-tied string photovoltaic (PV) systems. The presented control scheme achieves good quality current waveforms with unity power factor, dc-link voltage control, and neutral-point voltage minimization. Furthermore, the predictive controller has been further enhanced by including an average device switching frequency restriction and a $dv/dt$ mitigation. The main contribution of this paper is the avoidance of the potential leakage current due to parasitic capacitance of the PV modules by using a predictive model based control technique instead of modulated schemes and eliminating high-frequency common-mode voltage components. Experimental results during steady state and dynamic operation are presented to illustrate the behavior of the H-NPC converter commanded by the proposed control scheme. [ABSTRACT FROM AUTHOR]

For large-scale photovoltaic (PV) systems, the multistring configuration is becoming more and more attractive compared with the classical central inverter, since it results in better energy yield by realizing distributed maximum power point tracking. Among the existing solutions, an attractive topology consists in a single dc bus bar collector cascaded H-bridge (CHB) inverter. Through the use of a single dc bus bar collector, the CHB inverter presents inherent balanced operation while the multistring PV-system is fully decoupled from the grid-tie inverter. This paper proposes the experimental validation of this structure on a reduced-size single-phase laboratory prototype. Results confirm the interest of the proposed PV multistring architecture. [ABSTRACT FROM AUTHOR]

In this paper, a predictive control scheme is proposed for the low-voltage ride-through (LVRT) enhancement of direct-driven permanent-magnet-synchronous-generator-based megawatt-level wind turbines. The proposed method uses the turbine–generator rotor inertia to store the surplus energy during the grid voltage dips. The power conversion system is realized using a three-phase diode-bridge rectifier, a three-level-boost converter, and a neutral-point-clamped (NPC) inverter. The wind turbine requirements, such as maximum power point tracking, net dc-bus voltage control, balancing of the dc capacitor voltages, and reactive power generation, are modeled as the reference control variables. The generator- and grid-side cost functions are defined to deal with these control objectives. During each sampling interval, the control goals are achieved based on the minimization of cost functions. The coordination of boost and NPC converters and the exchange of reference control variables during normal and LVRT operation are formulated such that the power converters operate in a safe mode while meeting the grid code requirements. Simulation and experimental results are presented to validate the proposed strategy. [ABSTRACT FROM PUBLISHER]