Search

Battery energy storage is becoming an important part of modern power systems. As such, its operation model needs to be integrated in the state-of-the-art market clearing, system operation, and investment models. However, models that commonly represent operation of a large-scale battery energy storage are inaccurate. A major issue is that they ignore the dependence of the charging power on the battery state of energy. Consequently, market players might suffer great monetary losses for not being able to follow their day-ahead schedule and/or deliver the scheduled reserves. In order to bridge the gap between very detailed low-level battery charging constraints and high-level battery operation models used in the literature, this paper examines a dependence of battery charging ability on its state of energy. It proposes a laboratory procedure, which can be used for any battery type and technology, to obtain this dependence. It also formulates an accurate linear battery charging model, which closely approximates the real-life battery charging constraints. The proposed battery charging model is compared against the models commonly used in the literature. Battery operation schedules obtained by all the models are compared against experimentally obtained results in order to assess the value of the proposed model in real life. [ABSTRACT FROM AUTHOR]

Distributed transmission-scale energy storage is becoming economically feasible due to the growing share of renewable generation and cost reduction of specific storage technologies, primarily batteries. Under these circumstances, independent merchants may start investing in storage facilities. On the other hand, system operators, besides investing in transmission lines, may, under certain conditions, invest in storage units as well. This paper formulates a trilevel model where the upper-level problem optimizes the system operator's transmission line and energy storage investments, the middle-level problem determines merchant energy storage investment decisions, while the lower level problem simulates market clearing process for representative days. After replacing the lower level problem with its primal dual equivalent conditions, the middle- and lower level problems are merged into a mixed-integer problem with equilibrium constraints. The resulting bilevel structure is iteratively solved using a cutting plane algorithm. The proposed formulation is first applied to a six-bus system to present the mechanics of the model and then to the IEEE RTS-96 test system. The results show that even at the low cost of energy storage, the system operator (SO) still prefers line investments, while merchant investments are driven by the volatility of LMPs. Both the SO and merchant investments increase the social welfare, although this increase is mostly driven by the SO investments. [ABSTRACT FROM AUTHOR]

Massive integration of renewable energy resources calls for new operating and planning paradigms, which address reduced controllability and increased uncertainty on the generation side. On the other hand, emerging energy storage technologies can provide additional flexibility. Therefore, generation and storage expansion models need to be coordinated to ensure sufficiency of system-wide response capabilities within different regulation intervals. This paper proposes a coordinated generation and storage expansion formulation considering primary frequency response constraints. This is a stochastic mixed-integer linear program solved using an off-the-shelf solver. The proposed formulation is compared to the case when primary frequency response is neglected. The case study performed for an eight-zone ISO New England test system quantifies the value of energy storage simultaneously providing primary frequency response and spatio-temporal arbitrage. [ABSTRACT FROM AUTHOR]

Suitably located energy storage systems are able to collect significant revenue through spatiotemporal arbitrage in congested transmission networks. However, transmission capacity expansion can significantly reduce or eliminate this source of revenue. Investment decisions by merchant storage operators must, therefore, account for the consequences of potential investments in transmission capacity by central planners. This paper presents a tri-level model to co-optimize merchant electrochemical storage siting and sizing with centralized transmission expansion planning. The upper level takes the merchant storage owner's perspective and aims to maximize the lifetime profits of the storage, while ensuring a given rate of return on investments. The middle level optimizes centralized decisions about transmission expansion. The lower level simulates market clearing. The proposed model is recast as a bi-level equivalent, which is solved using the column-and-constraint generation technique. A case study based on a 240-bus, 448-line testbed of the Western Electricity Coordinating Council interconnection demonstrates the usefulness of the proposed tri-level model. [ABSTRACT FROM PUBLISHER]

Energy storage (ES) is a pivotal technology for dealing with the challenges caused by the integration of renewable energy sources. It is expected that a decrease in the capital cost of storage will eventually spur the deployment of large amounts of ES. These devices will provide transmission services, such as spatiotemporal energy arbitrage, i.e., storing surplus energy from intermittent renewable sources for later use by loads while reducing the congestion in the transmission network. This paper proposes a bilevel program that determines the optimal location and size of storage devices to perform this spatiotemporal energy arbitrage. This method aims to simultaneously reduce the system-wide operating cost and the cost of investments in ES while ensuring that merchant storage devices collect sufficient profits to fully recover their investment cost. The usefulness of the proposed method is illustrated using a representative case study of the ISO New England system with a prospective wind generation portfolio. [ABSTRACT FROM AUTHOR]

Energy storage can alleviate the problems that the uncertainty and variability associated with renewable energy sources such as wind and solar create in power systems. Besides applications such as frequency control, temporal arbitrage or the provision of reserve, where the location of storage is not particularly relevant, distributed storage could also be used to alleviate congestion in the transmission network. In such cases, the siting and sizing of this distributed storage is of crucial importance to its cost-effectiveness. This paper describes a three-stage planning procedure to identify the optimal locations and parameters of distributed storage units. In the first stage, the optimal storage locations and parameters are determined for each day of the year individually. In the second stage, a number of storage units is available at the locations that were identified as being optimal in the first stage, and their optimal energy and power ratings are determined. Finally, in the third stage, with both the locations and ratings fixed, the optimal operation of the storage units is simulated to quantify the benefits that they would provide by reducing congestion. The quality of the final solution is assessed by comparing it with the solution obtained at the first stage without constraints on storage sites or size. The approach is numerically tested on the IEEE RTS 96. [ABSTRACT FROM AUTHOR]