Search

Giant negative ion sources for neutral beam injectors deliver huge negative ion currents, thanks to their multi-beamlet configuration. As the single-beamlet optics defines the transmission losses along the beamline, the extraction of a similar current for all beamlets is extremely desirable, in order to facilitate the beam source operation (i.e., around perveance match). This Review investigates the correlation between the vertical profile of beam intensity and the vertical profiles of plasma properties at the extraction region of the source, focusing on the influence of increasing cesium injection. Only by the combined use of all available source diagnostics, described in this Review, can beam features on the scale of the non-uniformities be investigated with a sufficient space resolution. At RF power of 50 kW/driver, with intermediate bias currents and a filter field of 2.4 mT, it is found that the central part of the four vertical beam segments exhibits comparable plasma density and beamlet currents; at the edges of the central segments, both the beam and electron density appear to decrease (probably maintaining fixed electron-to-ion ratio); at the bottom of the source, an increase of cesium injection can compensate for the vertical drifts that cause a much higher presence of electrons and a lower amount of negative ions. [ABSTRACT FROM AUTHOR]

• SPIDER source was disassembled and inspected after 3.5 years of operation. • Molybdenum coating was found damaged in some components and characterisation was performed. • Caesium deposition was found unevenly distributed, characterisation and cleaning procedures were preliminary tested. • Interaction of high energy particles with surfaces were investigated. SPIDER is the negative ion source testbed for ITER neutral beam injector. It is currently the largest negative ion source ever built, equipped with a 100 keV accelerator, aiming at producing a negative ion beam with an extracted current density in hydrogen of 355 A/m2, beam-on time of one hour. During the first 3.5 years of operation several improvements on the SPIDER source and its operating conditions were implemented. This paper focuses on the description of materials degradation phenomena in SPIDER and on the lessons learnt that were derived from components inspection during the already planned shutdown in 2022. The aim of these inspections was to improve the design of some components and to repair or refurbish damaged components. In particular, this paper describes the characterisation of damaged molybdenum coating, testing of surface cleaning techniques and experimental evidence of caesium vapour uneven distribution inside the plasma chamber. Sputtering due to beam particles was also investigated experimentally to observe its effect on materials used in SPIDER. [ABSTRACT FROM AUTHOR]