Search

The study has prepared highly conducting polymer electrolyte films using solution cast technique with poly(vinylidene fluoride‐co‐hexafluoropropylene) PVDF‐HFP, mixture of ethylene carbonate (EC), and propylene carbonate (PC) as plasticizer and latex of Calotropis gigantea (CGL) as an ionic source. In this study, four films are prepared using PVDF‐HFP:CGL in ratio 1:1 with the increasing concentration of EC+PC as 1, 2, 3, and 4 M named as 1:1:1, 1:1:2, 1:1:3, 1:1:4. The prepared polymer electrolyte is examined by polarized optical microscopy (POM), elemental dispersive X‐ray technique (EDX), and complex impedance spectroscopy. EDX and POM are studied for the surface morphology of all prepared samples and to investigate the porous nature of films. The enhancement in ionic conductivity occurs due to CGL and increasing amount of EC‐PC. Conductivity of highest composition (1:1:4) polymer electrolyte film is found to be ≈10−3 S cm−1. The optimized polymer electrolyte film is considered as a promising candidate for application in supercapacitors. [ABSTRACT FROM AUTHOR]

A blend polymer based on the latex of the South-Asian giant milkweed Calotropis gigantea (CGL) combined with poly (vinylidene fluoride)-co-hexafluoropropylene (PVDF-HFP) at a mass ratio of 1:1 without the addition of doping salts was synthesized via solution casting to prepare an ionic conductive film. The morphology, crystalline state, vibrational and thermal properties of the film were investigated by Scanning electron microscopy, X-ray diffraction, Fourier Transform infrared spectroscopy (FTIR), Thermal gravimetric analysis (TGA) and Differential scanning calorimetry (DSC). The ionic conductivity and transport properties were investigated by using electrochemical impedance spectroscopy (EIS) Technique. Due the highest ionic conductivity at room temperature (2.7 x 10−2 S/cm), all-solid-state electrolyte was assembled using the prepared polymer film and a comparative study was conducted with respect to 1M H2SO4 liquid electrolyte, regarding the specific capacitance and the electrical properties. The results demonstrate that the fabricated all-solid-state supercapacitor using PVDF-HFP/CGL blend polymer film as electrolyte matches the performance of the liquid electrolyte. [ABSTRACT FROM AUTHOR]

In this work, solution cast method was adapted for the preparation of 1-ethyl-3-methylimidazolium dicyanamide (EMImDCN)-doped solid polymer electrolyte. Optimum composition of polymer electrolyte (polyethylene oxide + sodium iodide) was treated as the host polymer. The ionic conductivity was further enhanced by adding low-viscosity ionic liquid (IL) EMImDCN. Electrical, thermal, dielectric, and photoelectrochemical properties of polymer host and IL-doped solid polymer electrolyte (ILDPE) are presented in detail. An electrochemical device, that is, dye-sensitized solar cell was fabricated using maximum conducting ILDPE film, which shows short-circuit current density of 0.118 mA/cm2, open-circuit voltage of 0.71 V, and overall efficiency of 0.061% at 1 sun condition. [ABSTRACT FROM AUTHOR]

This paper reports the synthesis, characterization and dual electrochemical application of a new kind of ionic liquid (IL) based polymer electrolyte. The ionic liquid 1, 2-dimethyl-3-propylimidazolium bis(trifluoromethylsulfonyl)imide (DMPImTFSI) and polymer Poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) have been chosen for present study. The electrical conductivity measurement shows many fold enhancement of ionic conductivity by blending IL into polymer matrix. Scanning electron microscopy (SEM) image confirms the uniform surface morphology of the synthesized thin film and cross-section image shows the interface layer of polymer and electrode. We have fabricated an efficient dye sensitized solar cell (DSSC) and electric double layer capacitor (EDLC) using IL-polymer electrolyte (optimized maximum conductivity) system which further affirms that this material is highly stable and reliable for long duration in energy devices. [ABSTRACT FROM AUTHOR]