Search

The supply and bioavailability of dissolved iron sets the magnitude of surface productivity for ∼ 40% of the global ocean. The redox state, organic complexation, and phase (dissolved versus particulate) of iron are key determinants of iron bioavailability in the marine realm, although the mechanisms facilitating exchange between iron species (inorganic and organic) and phases are poorly constrained. Here we use the isotope fingerprint of dissolved and particulate iron to reveal distinct isotopic signatures for biological uptake of iron during a GEOTRACES process study focused on a temperate spring phytoplankton bloom in subtropical waters. At the onset of the bloom, dissolved iron within the mixed layer was isotopically light relative to particulate iron. The isotopically light dissolved iron pool likely results from the reduction of particulate iron via photochemical and (to a lesser extent) biologically mediated reduction processes. As the bloom develops, dissolved iron within the surface mixed layer becomes isotopically heavy, reflecting the dominance of biological processing of iron as it is removed from solution, while scavenging appears to play a minor role. As stable isotopes have shown for major elements like nitrogen, iron isotopes offer a new window into our understanding of the biogeochemical cycling of iron, thereby allowing us to disentangle a suite of concurrent biotic and abiotic transformations of this key biolimiting element.

There has been a growing interest in the cause and impact of hypoxic regions known as "dead zones" that have increasingly appeared along the west coast of the United States and have caused widespread destruction to the crab and fishing industry in this upwelling region. Here, we present results that demonstrate that the hypoxic conditions in the water column over the continental shelf result in a marked increase in iron(II) concentrations, which contribute to elevated dissolved and labile particulate iron concentrations. These elevated dissolved iron(II) concentrations result from two factors: (1) the hypoxic water column allows extremely elevated iron(II) concentrations in reducing porewaters to exist close to the sediment water interface, leading to an increased flux of iron(II) from the sediments; (2) the low oxygen, low pH, and low temperatures within the bottom boundary layer act in concert to markedly slow down the oxidation rate of Fe(ll). During upwelling conditions, this process can result in a greatly enhanced source of Fe available to upwell to surface waters, potentially increasing phytoplankton productivity, which can, in turn, lead to enhanced export flux, driving the system further into hypoxic or suboxic conditions.

Hydrothermal vents have emerged as an important source of iron to seawater, yet only a subset of iron is soluble and persists long enough to be available for surface biological uptake. The longevity and solubility of iron in seawater is governed by strong organic ligands, like siderophores, that are produced by marine microorganisms and are a part of the ocean's dissolved iron-binding ligand pool. These ligands have been hypothesized to aid in the persistence of dissolved iron in hydrothermal environments. To explore this hypothesis, we measured iron, iron-binding ligands, and siderophores from 11 geochemically distinct sites along a 1,700 km section of the Mid-Atlantic Ridge. Siderophores were found in hydrothermal plumes at all sites, with proximity to the vent playing an important role in dictating siderophore types and diversity. The notable presence of amphiphilic siderophores may point to microbial utilization of siderophores to access particulate hydrothermal iron, and the exchange of dissolved and particulate iron. The tight coupling between strong ligands and dissolved iron within neutrally buoyant plumes across six distinct hydrothermal environments, and the presence of dissolved siderophores with siderophore-producing microbial genera, suggests that biological production of siderophores exerts a key control on hydrothermal dissolved iron concentrations. [ABSTRACT FROM AUTHOR]

Supply of iron (Fe) to the surface ocean supports primary productivity, and while hydrothermal input of Fe to the deep ocean is known to be extensive it remains poorly constrained. Global estimates of hydrothermal Fe supply rely on using dissolved Fe (dFe) to excess He (xs3He) ratios to upscale fluxes, but observational constraints on dFe/xs3He may be sensitive to assumptions linked to sampling and interpolation. We examined the variability in dFe/xs3He using two methods of estimation, for four vent sites with different geochemistry along the Mid-Atlantic Ridge. At both Rainbow and TAG, the plume was sampled repeatedly and the range of dFe/xs3He was 4 to 63 and 4 to 87 nmol:fmol, respectively, primarily due to differences in plume age. To account for background xs3He and shifting plume position, we calibrated He values using contemporaneous dissolved Mn (dMn). Applying this approach more widely, we found dFe/xs3He ratios of 12, 4–8, 4–44, and 4–86 nmolfmol-1 for the Menez Gwen, Lucky Strike, Rainbow, and TAG hydrothermal vent sites, respectively. Differences in plume dFe/xs3He across sites were not simply related to the vent endmember Fe and He fluxes. Within 40 km of the vents, the dFe/xs3He ratios decreased to 3–38 nmolfmol-1 , due to the precipitation and subsequent settling of particulates. The ratio of colloidal Fe to dFe was consistently higher (0.67–0.97) than the deep N. Atlantic (0.5) throughout both the TAG and Rainbow plumes, indicative of Fe exchange between dissolved and particulate phases. Our comparison of TAG and Rainbow shows there is a limit to the amount of hydrothermal Fe released from vents that can form colloids in the rising plume. Higher particle loading will enhance the longevity of the Rainbow hydrothermal plume within the deep ocean assuming particles undergo continual dissolution/disaggregation. Future studies examining the length of plume pathways required to escape the ridge valley will be important in determining Fe supply from slow spreading mid-ocean ridges to the deep ocean, along with the frequency of ultramafic sites such as Rainbow. Resolving the ridge valley bathymetry and accounting for variability in vent sources in global biogeochemical models will be key to further constraining the hydrothermal Fe flux. [ABSTRACT FROM AUTHOR]

The dispersal of dissolved iron (DFe) from hydrothermal vents is poorly constrained. Combining field observations and a modeling hierarchy, we find the dispersal of DFe from the Trans‐Atlantic‐Geotraverse vent site occurs predominantly in the colloidal phase and is controlled by multiple physical processes. Enhanced mixing near the seafloor and transport through fracture zones at fine‐scales interacts with the wider ocean circulation to drive predominant westward DFe dispersal away from the Mid‐Atlantic ridge at the 100 km scale. In contrast, diapycnal mixing predominantly drives northward DFe transport within the ridge axial valley. The observed DFe dispersal is not reproduced by the coarse resolution ocean models typically used to assess ocean iron cycling due to their omission of local topography and mixing. Unless biogeochemical models account for fine‐scale physics and colloidal Fe, they will inaccurately represent DFe dispersal from axial valley ridge systems, which make up half of the global ocean ridge crest. Plain Language Summary: Hydrothermal venting along mid ocean ridges supplies large quantities of the trace metal iron to the ocean. Once it mixed with oxygenated seawater, precipitation leads to iron being lost from the dissolved phase to generate seafloor metal deposits. However, a small fraction of iron supplied escapes precipitation and remains in the dissolved phase. The processes that control the retention and ocean transport of hydrothermal dissolved iron is important as it has a disproportionate influence on the global carbon cycle. In this work, we examined the processes driving the dispersal of dissolved iron from a major site of hydrothermal venting on the northern mid Atlantic ridge. We found that the complex topography of the mid Atlantic ridge was crucial in steering the escape of dissolved iron in the colloidal size range out of the immediate mid ocean ridge system. This raises challenges for the large scale ocean models used to represent the global ocean iron cycle as they are typically not parameterized at sufficient spatial resolution. The use of multiple grids, with higher resolution nests, may offer a solution to the challenge of representing the interactions of tracer dispersal with complex topography. Key Points: Iron is dispersed from trans Atlantic geotraverse predominantly northward within the axial valley and westward off axis, dominated by the colloidal size fractionA combination of fine‐scale processes are necessary to explain the dispersal both within and outside the axial valleyCoarse resolution models are impaired in their ability to constrain the broader influence of iron supplied from axial valley ridge systems [ABSTRACT FROM AUTHOR]

Nano‐ and picophytoplankton are a major component of open‐ocean ecosystems and one of the main plankton functional types in biogeochemical models, yet little is known about their trace metal contents. In cultures of the picoeukaryote Ostreococcus lucimarinus, iron limitation reduced iron quotas by 68%, a fraction of the plasticity known in diatoms. In contrast, a commonly co‐occurring cyanobacterium, Prochlorococcus, showed variable iron contents with iron availability in culture. Synchrotron X‐ray fluorescence was used to measure single‐cell metal (Mn, Fe, Co, Ni, Zn) quotas of autotrophic flagellates (1.4–16.8‐μm diameter) collected from four ocean regions. Iron quotas were tightly constrained and showed little response to iron availability, similar to cultured Ostreococcus. Zinc quotas also did not vary with zinc availability but appeared to vary with phosphorus availability. These results suggest that macronutrient and metal availability may be equally important for controlling metal contents of small eukaryotic open‐ocean phytoplankton. [ABSTRACT FROM AUTHOR]

Supply of iron (Fe) to the surface ocean supports primary productivity and while hydrothermal input of Fe to the deep ocean is known to be extensive, it remains poorly constrained. Global estimates of hydrothermal Fe supply rely on using the dissolved Fe (dFe) to excess He (xs³ He) ratios to upscale fluxes, but observational constraints on dFe/xs³ He may be sensitive to assumptions linked to sampling and interpolation. We examined the variability in dFe/xs³ He using two methods of estimation, for four vent sites with different geochemistry along the Mid-Atlantic Ridge. At both Rainbow and TAG, the plume was sampled repeatedly and the range of dFe/xs3 He was 4 to 63 and 4 to 87 nmol/fmol, respectively, primarily due to differences in plume age. To account for background xs³ He and shifting plume position, we calibrated He values using contemporaneous dissolved Mn (dMn). Applying this approach more widely, we found dFe/xs³ He ratios of 12, 4-8, 4-44, 4-86 nmol/fmol for the Menez Gwen, Lucky Strike, Rainbow and TAG hydrothermal vent sites, respectively. Differences in plume dFe/xs3 He across sites were not simply related to the vent end member Fe and He fluxes. Within 40 km of the vents, the dFe/xs³ He ratios decreased to 3-38 nmol/fmol, due to the precipitation and subsequent settling of particulates. The ratio of colloidal Fe to dFe was consistently higher (0.67-0.97) than the deep N. Atlantic (0.5) throughout both the TAG and Rainbow plumes, indicative of Fe exchange between dissolved and particulate phases. Our comparison of TAG and Rainbow shows there is a limit to the amount of hydrothermal Fe released from vents that can form colloids in the rising plume. Higher particle loading will enhance the longevity of the Rainbow hydrothermal plume within the deep ocean assuming particles undergo continual dissolution/disaggregation. Future studies examining the length of plume pathways required to escape the ridge valley will be important in determining Fe supply from slow spreading mid-ocean ridges to the deep ocean, along with the frequency of ultramafic sites such as Rainbow. Resolving the ridge valley bathymetry and accounting for variability in vent sources in global biogeochemical models will be key to further constraining the hydrothermal Fe flux. [ABSTRACT FROM AUTHOR]

Continental margins are disproportionally important for global primary production, fisheries and CO2 uptake. However, across the Northeast Atlantic shelves, there has been an ongoing summertime decline of key biota—large diatoms, dinoflagellates and copepods—that traditionally fuel higher tropic levels such as fish, sea birds and marine mammals. Here, we combine multiple time series with in situ process studies to link these declines to summer nutrient stress and increasing proportions of picophytoplankton that can comprise up to 90% of the combined pico‐ and nanophytoplankton biomass in coastal areas. Among the pico‐fraction, it is the cyanobacterium Synechococcus that flourishes when iron and nitrogen resupply to surface waters are diminished. Our field data show how traits beyond small size give Synechococcus a competitive edge over pico‐ and nanoeukaryotes. Key is their ability to grow at low irradiances near the nutricline, which is aided by their superior light‐harvesting system and high affinity to iron. However, minute size and lack of essential biomolecules (e.g. omega‐3 polyunsaturated fatty acids and sterols) render Synechococcus poor primary producers to sustain shelf sea food webs efficiently. The combination of earlier spring blooms and lower summer food quantity and quality creates an increasing period of suboptimal feeding conditions for zooplankton at a time of year when their metabolic demand is highest. We suggest that this nutrition‐related mismatch has contributed to the widespread, ~50% decline in summer copepod abundance we observe over the last 60 years. With Synechococcus clades being prominent from the tropics to the Arctic and their abundances increasing worldwide, our study informs projections of future food web dynamics in coastal and shelf areas where droughts and stratification lead to increasing nutrient starvation of surface waters. [ABSTRACT FROM AUTHOR]

Abstract High quality observational data with a firm uncertainty assessment are essential for the proper validation of biogeochemical models for trace metals such as iron. Typically, concentrations of these metals are very low in oceanic waters (nM and sub nM) and ICP-MS is therefore a favoured technique for quantitative analysis. Uncertainties in the measurement step are generally well constrained, even at sub-nM concentrations. However, the measurement step is only part of the overall procedure. For the determination of trace metal solubilities from aerosols in the surface ocean, aerosol collection on a filter paper followed by a leaching procedure is likely to make a significant contribution to the overall uncertainty. This paper quantifies the uncertainties for key trace metals (cobalt, iron, lead and vanadium), together with aluminium as a reference element, for a controlled, flow through laboratory leaching procedure using filters collected from three different sampling sites (Tudor Hill (Bermuda), Heraklion (Crete) and Tel-Shikmona (Israel)) and water, glucuronic acid and desferrioxamine B as leachants. Relative expanded uncertainties were in the range of 12–29% for cobalt, 12–62% for iron, 13–45% for lead and 5–11% for vanadium. Fractional solubilities for iron ranged from 0.2 ± 0.1% to 16.9 ± 3.5%. Graphical abstract fx1 Highlights • Protocol for the leaching of aerosol filters for the determination of metals. • Aerosol samples from three different locations (Tudor Hill (Bermuda), Heraklion (Crete) and Tel-Shikmona (Israel). • Three contrasting leachants used (water, desferrioxamine B and glucuronic acid). • The relative expanded uncertainty for the total amount of each metal leached from a filter paper was 7% or better. • Sufficient replication essential to achieve acceptable relative expanded uncertainty. [ABSTRACT FROM AUTHOR]

The proportion of aerosol iron (Fe) that dissolves in seawater varies greatly and is dependent on aerosol composition and the physicochemical conditions of seawater, which may change depending on location or be altered by global environmental change. Aerosol and surface seawater samples were collected in the Sargasso Sea and used to investigate the impact of these changing conditions on aerosol Fe dissolution in seawater. Our data show that seawater temperature, pH, and oxygen concentration, within the range of current and projected future values, had no significant effect on the dissolution of aerosol Fe. However, the source and composition of aerosols had the most significant effect on the aerosol Fe solubility, with the most anthropogenically influenced samples having the highest fractional solubility (up to 3.2%). The impact of ocean warming and acidification on aerosol Fe dissolution is therefore unlikely to be as important as changes in land usage and fossil fuel combustion. Our experimental results also reveal important changes in the size distribution of soluble aerosol Fe in solution, depending on the chemical conditions of seawater. Under typical conditions, the majority (77-100%) of Fe released from aerosols into ambient seawater existed in the colloidal (0.02-0.4 µm) size fraction. However, in the presence of a sufficient concentration of strong Fe-binding organic ligands (10 n M) most of the aerosol-derived colloidal Fe was converted to soluble Fe (<0.02 µm). This finding highlights the potential importance of organic ligands in retaining aerosol Fe in a biologically available form in the surface ocean. [ABSTRACT FROM AUTHOR]

Inorganic nitrogen depletion restricts productivity in much of the low-latitude oceans, generating a selective advantage for diazotrophic organisms capable of fixing atmospheric dinitrogen (N2). However, the abundance and activity of diazotrophs can in turn be controlled by the availability of other potentially limiting nutrients, including phosphorus (P) and iron (Fe). Here we present high-resolution data (~0.3°) for dissolved iron, aluminum, and inorganic phosphorus that confirm the existence of a sharp north-south biogeochemical boundary in the surface nutrient concentrations of the (sub)tropical Atlantic Ocean. Combining satellite-based precipitation data with results from a previous study, we here demonstrate that wet deposition in the region of the intertropical convergence zone acts as the major dissolved iron source to surface waters. Moreover, corresponding observations of N2 fixation and the distribution of diazotrophic Trichodesmium spp. indicate that movement in the region of elevated dissolved iron as a result of the seasonal migration of the intertropical convergence zone drives a shift in the latitudinal distribution of diazotrophy and corresponding dissolved inorganic phosphorus depletion. These conclusions are consistent with the results of an idealized numerical model of the system. The boundary between the distinct biogeochemical systems of the (sub)tropical Atlantic thus appears to be defined by the diazotrophic response to spatial-temporal variability in external Fe inputs. Consequently, in addition to demonstrating a unique seasonal cycle forced by atmospheric nutrient inputs, we suggest that the underlying biogeochemical mechanisms would likely characterize the response of oligotrophic systems to altered environmental forcing over longer timescales. [ABSTRACT FROM AUTHOR]

Abstract: Coastal waters in the northern Gulf of Alaska (GoA) are considered iron-rich and nitrate-poor, in contrast to the iron-poor, high-nitrate, low chlorophyll (HNLC) waters of the central GoA. The degree of mixing between these two regimes, enhanced by mesoscale eddies, is essential to the high productivity observed in the region. As part of a study on iron delivery to the central GoA via mesoscale eddies, extensive work was focused on characterizing the coastal endmember, the Alaska Coastal Current. In surface Alaskan coastal waters between Yakutat and the Kenai Peninsula, dissolved iron concentrations ranged from 0.5 to 4.1nM with an average of ∼2nM. In contrast, leachable particulate iron concentrations were much higher and more variable, ranging from over 1μM in the Alsek River plume to less than 5nM at the base of Cook Inlet. Cross-shelf transport of both surface and subsurface dissolved iron and leachable particulate iron was observed. Throughout the study area, leachable particulate iron values were at least an order of magnitude higher than dissolved values, suggesting that the system''s ability to solubilize this large concentration of leachable particulate iron is overwhelmed by the massive input of glacial-derived particulate iron. Nevertheless, suspended leachable particulate iron remains available for exchange to the dissolved phase and is suggested to maintain a relatively constant (∼2nM) source of dissolved iron in the coastal GoA. [Copyright &y& Elsevier]

Abstract: The influence of the Columbia River plume on the distributions of nitrate and iron and their sources to coastal and shelf waters were examined. In contrast to other large estuaries, the Columbia River is a unique study area as it supplies very little nitrate (5 μM) and iron (14–30 nM) at salinities of 1–2 to coastal waters. Elevated nitrate and dissolved iron concentrations (as high as 20 μM and 20 nM) were observed, however, in the near field Columbia River plume at salinities of 20. Surface nitrate concentrations were higher than observed in the Columbia River itself and therefore must be added by entrainment of higher nitrate concentrations from subsurface coastal waters. Tidal flow was identified as an important factor in determining the chemical constituents of the Columbia River plume. During the rising flood tide, nitrate and iron were entrained into the plume waters resulting in concentrations of 15 μM and 6 nM, respectively. Conversely, during the ebb tide the concentrations of nitrate and total dissolved iron were reduced to 0.3–3 μM and 1–2 nM, respectively, with a concomitant increase in chlorophyll a concentrations. As these plume waters moved offshore the plume drifted directly westward, over a nitrate depleted water mass (<0.2 μM). The plume water was also identified to move southwards and offshore during upwelling conditions and nitrate concentrations in this far field plume were also depleted. Iron concentrations in the near-field Columbia River plume are sufficient to meet the biological demand. However, due to the low nitrate in the Columbia River itself, nitrate in the plume is primarily dependent on mixing with nitrate rich, cold, high salinity subsurface waters. Without such an additional source the plume rapidly becomes nitrate limited. [Copyright &y& Elsevier]

Abstract: The use of a commercially available chelating resin with NTA-type functional groups for concentration of trace metals from seawater is described. Trace metal recoveries from this NTA Superflow chelating resin are pH dependent. At a pH of ≤2 only iron(III) and copper are quantitatively recovered from the resin. Iron(II) cannot be quantitatively recovered from this resin below a pH of 5. However, oxidation of acidified seawater samples (pH 1.7) with H2O2 prior to loading onto the resin has been demonstrated to allow quantitative recovery of total dissolved iron. Deferrioxamine and Rhodoturlic Acid, two commercially available siderophores were used to investigate the effect of strong Fe(III)-binding organic ligands on the ability to retain iron at different pH values. Acidification of seawater samples to pH 1.7 dissociates the iron complexed to these organic ligands, thereby allowing total dissolved iron and copper to be determined. Acidified samples from Monterey Bay were analyzed by a flow injection method coupled to ICP-SFMS detection using the NTA Superflow resin in the pre-concentration step. Results from this study show that when seawater samples are stored acidified (pH 1.7) over time, a portion of iron(III) is reduced to iron(II), thus necessitating the use of H2O2 to reoxidize the Fe(II) to Fe(III) prior to analysis. Total dissolved concentrations of iron and copper can be directly obtained on seawater samples at pH 1.7 with this method, eliminating the need to buffer the sample to a higher pH prior to column loading. This resin has the potential to be used in shipboard or in situ flow injection methods. [Copyright &y& Elsevier]

• Organic ligands and nanoparticles increase the resistance to oxidation. • We present an improved multiparametric equation to calculate Fe(II) oxidation rates. • Oxidation rates close to the vent sites are systematically faster than theorized. One of the recently recognized main sources of iron to the deep ocean inventory is the hydrothermal activity associated with mid-ocean ridges. Little is known about the oxidation kinetics of iron(II) within these environments, especially the dependence on physico-chemical parameters such as temperature (T), pH, particle size-fractionation and the effect of organic matter. Following sample collection during the GA13 section cruise, the iron(II) oxidation at six hydrothermal vent sites (Menez Gwen, Lucky Strike, Rainbow, Lost City, Broken Spur and TAG) along the Mid-Atlantic Ridge were investigated, revealing high variability. The Fe(II) oxidation rate constant analysis from multiple stations at two sites (Rainbow and TAG), revealed that factors, other than T and pH, controlled the oxidation process. Experiments on the effect of particle size-fractionation and organic matter at different pH showed that the presence of organic ligands and colloidal size particles delayed the oxidation process, while not affecting the overall pH dependency. Extending our analysis to the broader relationship between the Fe(II) oxidation rate constants across a range of temperatures (between 2 and 25 °C) and pH (between 7 and 8) on a set of selected hydrothermal samples allowed us to derive a multiparametric equation to model the iron(II) oxidation rate constants in the ocean. This equation covers a larger range of temperatures than previous published equations, improving its applicability for global biogeochemical models. [ABSTRACT FROM AUTHOR]

The Southern Ocean is the largest high nutrient low chlorophyll (HNLC) oceanic region, where iron limits phytoplankton growth and productivity and ultimately influences the Biological Carbon Pump (BCP). Natural exceptions to the HNLC regime occur where island wakes cause iron to be mixed into surface waters from sediments, enabling large, prolonged phytoplankton blooms and increased carbon drawdown. Interactions between iron and phytoplankton are reciprocal in blooms: with plankton regulating the (re)cycling of iron through cellular uptake and remineralisation. The depth of iron remineralisation then influences either re-supply to the surface mixed layer biota or sequestration into deeper waters. Water column trace metal observations and shipboard experiments, using bioassays and radioisotope (55Fe, 32Si, 14C) cycling, were undertaken to investigate surface mixed layer phytoplankton iron limitation, iron uptake, and mesopelagic iron remineralisation relative to carbon and silica within the November 2017 bloom downstream of South Georgia. Surface phytoplankton residing in the iron depleted mixed layer were iron limited throughout the four-week sampling period. Experiments designed to investigate particulate water column (re)cycling revealed limited iron remineralisation from freshly produced upper ocean particles. The main pathway of iron transfer from particulates into the dissolved phase was through rapid (<2 d) release of extra-cellular adsorbed iron, which, if occurring in situ , could contribute to observed higher sub-surface dissolved Fe concentrations. This was accompanied by a small loss of cellular carbon, likely through respiration of the fixed 14C, and limited dissolution of particulate 32Si to dissolved 32Si. Decoupling of the remineralisation length scales for Fe, C and Si, with Fe having the fastest turnover, is thus likely in the upper mesopelagic zone beneath the bloom. • Sinking diatom cells are viable in the upper mesopelagic, resisting remineralisation by microbial degradation. • Abiotic release of extracellular Fe, retention of bSiO 2 and respiration of C decouples the remineralisation length scales. • Abiotic release of extracellular Fe could be taken up to replenish cellular Fe or mixed to the surface to prolong a bloom. [ABSTRACT FROM AUTHOR]

Dissolved (<0.2 μm) trace metals (dTMs) including iron (Fe), manganese (Mn), and cobalt (Co) are micronutrients that (co-) limit phytoplankton growth in many ocean regions. Here, we present the spatial and seasonal distributions of dFe, dMn, and dCo on the Northeast Atlantic continental margin (Celtic Sea), along a transect across the shelf and two off-shelf transects along a canyon and a spur. Waters on the continental shelf showed much higher dTM concentrations (dFe 0.07–6.50 nmol L−1, average 1.41 ± 0.96 nmol L−1, n = 138; dMn 0.868–14.8 nmol L−1, 2.75 ± 2.37 nmol L−1, n = 148; dCo 54.8–217 pmol L−1, 109 ± 32 pmol L−1, n = 144) than on the slope (dFe 0.03–1.90 nmol L−1, 0.65 ± 0.43 nmol L−1, n = 454; dMn 0.223–1.14 nmol L−1, 0.58 ± 0.20 nmol L−1, n = 458; dCo 27.3–122 pmol L−1, 71.7 ± 11.7 pmol L−1, n = 441), attributed to strong dTM contributions from a low-salinity endmember, i.e., riverine discharge. Benthic sedimentary input via reductive dissolution (especially for dFe and dMn), delineated by short-lived radium (Ra) isotopic activities (223Ra xs and 224Ra xs), was only prominent at a station (Site A) characterized by fine sediments. On the continental slope, dMn levels at depth were mainly determined by the formation of insoluble Mn oxides and the intrusion of Mediterranean Outflow Waters. In contrast, dFe and dCo concentrations at depth were balanced by the regeneration from remineralization of sinking organic particles and scavenging removal. In addition, bottom and intermediate nepheloid layers along the slope illustrated both elevated dTM concentrations and Ra isotopic activities. The presence of nepheloid layers is especially significant along the canyon transect relative to the spur transect, demonstrating the importance of slope topography on the off-shelf transport of dTMs into the Northeast Atlantic Ocean. As a seasonal stratified shelf sea, dTMs and nutrients showed synchronized seasonal variations on the shelf, indicating the influence of biological processes in addition to source effects. Surface dFe and dCo were depleted in summer due to enhanced biological uptake, while sub-surface dFe and dCo were elevated in summer and autumn ascribed to the remineralization of sinking organic particles. In contrast, surface dMn levels were predominantly controlled by the seasonal variations in photoreduction, while sub-surface dMn concentrations were relatively constant throughout the year. The combined effects of fluvial and benthic sources, topographical controls, and biological processes shape the seasonal variations of dTM distributions. Such seasonal variations in dTMs and biological activities can affect the biological carbon pump on the Northeast Atlantic continental margin, and may further influence the carbon cycle in the Atlantic Ocean via the dynamic dTM exchange between continental margins and the open ocean. [ABSTRACT FROM AUTHOR]

In the northern Gulf of Alaska, mesoscale, anticyclonic eddies have been implicated as a mechanism of the cross-shelf exchange of iron (Fe)-replete coastal waters with Fe-deplete subarctic Alaskan gyre waters. Based on existing hydrography and macronutrient distributions, a Sitka eddy sampled during August 2007 is divided into a surface eddy core, a shallow subsurface eddy core, and a deeper subsurface eddy core. The distributions of aluminum (Al), manganese (Mn), and Fe in the eddy are examined and compared to distributions at shelf stations similar to where the eddy formed as well as basin stations representative of the Fe-limited subarctic Alaskan gyre. Relative to basin stations, dissolved and particulate Al and dissolved Mn were elevated in eddy core waters. Reactive Fe concentrations within the shallow subsurface eddy core were nearly seven times greater than reactive Fe concentrations at similar densities at the basin stations. This shallow subsurface eddy core is likely mixed into the euphotic zone during storm-induced mixing as well as mixing during isopycnal relaxation as an eddy dies out. The flux of reactive Fe to surface waters from the shallow subsurface core of eddies in the Gulf of Alaska is a significant source compared to both remote and local atmospheric dust deposition. It is hypothesized that Fe supply from eddies in the eastern Gulf of Alaska shifts the core of the high-nutrient, lower-than-expected chlorophyll water farther west in conjunction with an "eddy desert" in that same region. [ABSTRACT FROM AUTHOR]

Primary production in the Ross Sea, one of the most productive areas in the Southern Ocean, has previously been shown to be seasonally limited by iron. In two of three bottle incubation experiments conducted in the austral summer, significantly higher chlorophyll a (Chl a) concentrations were measured upon the addition of iron and B12, relative to iron additions alone. Initial bacterial abundances were significantly lower in the two experiments that showed phytoplankton stimulation upon addition of B12 and iron relative to the experiment that did not show this stimulation. This is consistent with the hypothesis that the bacteria and archaea in the upper water column are an important source of B12 to marine phytoplankton. The addition of iron alone increased the growth of Phaeocystis antarctica relative to diatoms, whereas in an experiment where iron and B12 stimulated total phytoplankton growth, the diatom Pseudonitzschia subcurvata went from comprising approximately 70% of the phytoplankton community to over 90%. Cobalt additions, with and without iron, did not alter Chl a biomass relative to controls and iron additions alone in the Ross Sea. Iron and vitamin B12 plus iron treatments caused reductions in the DMSP (dimethyl sulfoniopropionate) : Chl a ratio relative to the control and B12 treatments, consistent with the notion of an antioxidant function for DMSP. These results demonstrate the importance of a vitamin to phytoplankton growth and community composition in the marine environment. [ABSTRACT FROM AUTHOR]

Abstract: Mesoscale anticyclonic eddies in the Gulf of Alaska are an important mechanism for cross-shelf exchange of high iron, low nitrate coastal waters and low iron, high nitrate offshore waters. A Kenai eddy was sampled in September 2007, 8 months after formation. The subsurface eddy core layer contained reactive iron concentrations more than eight times greater than waters at the same depths outside the eddy. The subsurface core of the Kenai eddy (25.4≤σ θ ≤25.8) is suggested to be seasonally important as these waters can be brought to the surface with storm events and deep winter mixing. The deeper core layer (25.8≤σ θ ≤27.0) is suggested to be a source of iron to HNLC waters on a longer timescale, due to isopycnal mixing and eventual eddy relaxation. The subsurface and deeper core layers are important reservoirs of iron that can promote and sustain primary productivity over the lifetime of the Kenai eddy. In addition, dissolved and leachable particulate manganese are shown to be excellent tracers of eddy surface and subsurface waters, respectively. [Copyright &y& Elsevier]

Abstract: This study examines the distribution of leachable particulate iron (Fe) in the Columbia River, estuary, and near-field plume. Surface samples were collected during late spring and summer of 2004–2006 as part of four River Influence on Shelf Ecosystems (RISE) cruises. Tidal amplitude and river flow are the primary factors influencing the estuary leachable particulate Fe concentrations, with greater values during high flow and/or spring tides. Near the mouth of the estuary, leachable particulate Fe [defined as the particulate Fe solubilized with a 25% acetic acid (pH 2) leach containing a weak reducing agent to reduce Fe oxyhydroxides and a short heating step to access intracellular Fe] averaged 770 nM during either spring tide or high flow, compared to 320 nM during neap tide, low flow conditions. In the near-field Columbia River plume, elevated leachable particulate Fe concentrations occur during spring tides and/or higher river flow, with resuspended shelf sediment as an additional source to the plume during periods of coastal upwelling and spring tides. Near-field plume concentrations of leachable particulate Fe (at a salinity of 20) averaged 660 nM during either spring tide or high flow, compared to 300 nM during neap tide, low flow conditions. Regardless of tidal amplitude and river flow, leachable particulate Fe concentrations in both the river/estuary and near-field plume are consistently one to two orders of magnitude greater than dissolved Fe concentrations. The Columbia River is an important source of reactive Fe to the productive coastal waters off Oregon and Washington, and leachable particulate Fe is available for solubilization following biological drawdown of the dissolved phase. Elevated leachable Fe concentrations allow coastal waters influenced by the Columbia River plume to remain Fe-replete and support phytoplankton production during the spring and summer seasons. [Copyright &y& Elsevier]

Atmospheric deposition is an important pathway by which bioactive trace metals are delivered to the surface ocean. The proportions of total aerosol trace metals that dissolve in seawater, and thus become available to biota, are not well constrained and are therefore a key uncertainty when estimating atmospheric fluxes of these elements to surface waters. The aim of this study was to elucidate the main physico-chemical controls on the dissolution of the bioactive trace metals manganese (Mn), cobalt (Co), nickel (Ni) and lead (Pb). To this end, aerosol and surface seawater samples were collected in the Sargasso Sea and subsequently used in sequential seawater leach dissolution experiments to assess the role of aerosol source, seawater temperature, pH, and concentrations of dissolved oxygen and organic ligands, on aerosol trace metal dissolution. Results reveal that changes in key physico-chemical parameters in seawater leaches had little effect on the proportions of Mn, Co, Ni and Pb released from aerosols, although organic ligand amendments impacted the size distribution of aerosol-derived Mn in solution. Conversely, aerosol source and composition had the most significant effect on the dissolution of aerosol Co and Pb, with the most ‘anthropogenic’ aerosol samples displaying the highest fractional solubilities in seawater (up to 58% for Co and 112% for Pb). Fractional solubilities over the range of samples and conditions tested were in the range of 50–104% for Mn, 29–58% for Co, 40–85% for Ni and 67–112% for Pb. A large proportion (36–100%, median 89%) of the total dMn, dCo, dNi and dPb was mobilised rapidly during the first leaching step (5 min), with less dTM being released in leaches 2 through 4. Furthermore, investigation of the size distribution of the aerosol-derived trace metals in seawater showed that dissolved Pb was mostly colloidal (0.02–0.4 μm), dissolved Mn and Co were mostly soluble (< 0.02 μm), and dissolved Ni displayed a mixed size distribution. Good empirical relationships were observed between enrichment factors for aerosol antimony (Sb) and the fractional solubilities of aerosol Fe, Co and Pb, suggesting total aerosol Sb can be useful in estimating and modelling the fractional solubility of these metals using total aerosol trace metal concentrations from historical data. [ABSTRACT FROM AUTHOR]