Search

The plasma in the tokamak JT-60SA is initiated mainly by operating the four Switching Network Units (SNUs) inserted in the four modules of the Central Solenoid. In the framework of the “Broader Approach” agreement, these four SNUs were procured by the European Union. This paper presents the final assembly of the SNU system and the main tests performed in the last years before shipping it to Japan. The experimental results demonstrated the capabilities of the SNUs to comply with the JT-60SA requirements, even with better performances. [ABSTRACT FROM AUTHOR]

This paper presents the main characteristics and test results of the first Switching Network Unit (SNU) of the Central Solenoid for plasma initiation in the international experiment JT-60SA. The SNU can interrupt a direct current up to 20 kA producing at its terminals a voltage up to 5 kV with a rise time shorter than 100 μs. This is obtained by synchronizing the operation of a light electromechanical contactor with a static switch in order to combine the benefits of both devices. Even though the design was based on the JT-60SA specifications, the adopted solutions can be extended to many fusion and industrial applications. Due to the novelty of the developed solutions, an exhaustive set of tests were performed both on relevant single devices and on the complete SNU, even at full current, full voltage and full energy. The most relevant tests were performed using the Frascati Tokamak Upgrade (FTU) facilities reproducing the JT-60SA operating conditions. As the presented tests demonstrated the capabilities of the SNU to comply with the requirements, the manufacturing of the remaining three Central Solenoid SNUs can proceed and is expected to be completed by 2015. [ABSTRACT FROM AUTHOR]

Abstract: This paper describes the approved detailed design of the four Switching Network Units (SNUs) of the superconducting Central Solenoid of JT-60SA, the satellite tokamak that will be built in Naka, Japan, in the framework of the “Broader Approach” cooperation agreement between Europe and Japan. The SNUs can interrupt a current of 20kA DC in less than 1ms in order to produce a voltage of 5kV. Such performance is obtained by inserting an electronic static circuit breaker in parallel to an electromechanical contactor and by matching and coordinating their operations. Any undesired transient overvoltage is limited by an advanced snubber circuit optimized for this application. The SNU resistance values can be adapted to the specific operation scenario. In particular, after successful plasma breakdown, the SNU resistance can be reduced by a making switch. The design choices of the main SNU elements are justified by showing and discussing the performed calculations and simulations. In most cases, the developed design is expected to exceed the performances required by the JT-60SA project. [Copyright &y& Elsevier]

Supervisory control system for superconducting magnet power supplies in JT-60SA is designed and developed. This system is in charge of many kinds of control; discharge sequence control, real-time magnet current control, data acquisition, machine protection and human safety. In the design, communication interface has to be optimized according to all requirements. The most important feature is real-time control with 4 kHz which is required for equilibrium control of plasma. In order to satisfy this requirement, reflective memory (RFM) network is applied for high speed data sharing with multiple controllers. This paper describes the architecture of the control system and the operation of the power supply system under the supervision. [ABSTRACT FROM AUTHOR]

JT-60SA, the superconducting tokamak under construction in Japan, will be equipped with a mix of new and reused Power Supply Systems. Most of the new Power Supply Systems are procured by European Voluntary Contributors under the framework of Broader Approach agreement between Europe and Japan. For the toroidal circuit, the 25.7 kA steady state ac/dc converter is procured by CEA. For the poloidal circuits, the procurement of 10 ac/dc converters, almost all rated ±20 kA and about ±1 kV is shared between CEA and ENEA. The two in-vessel coils for fast control of plasma position are supplied with two independent thyristor converters procured by ENEA, each one rated ±5 kA and ±1 kV. The operation of four Switching Network Units procured by ENEA inserts settable resistors in series to each Central Solenoid module, producing up to 5 kV at the nominal current of 20 kA and allowing stable plasma initiation. The protection of toroidal and poloidal superconducting magnets is assured by thirteen Quench Protection Circuits procured by Consorzio RFX, rated ±20 kA and ±3.8 kV for poloidal coils and 25.7 kA and 2.8 kV for toroidal ones, inserting a discharge resistor in the related circuit for fast dissipation of the magnetic energy stored in the coil. Finally, the suppression of Resistive Wall Modes is actively performed by 18 in-vessel coils, independently supplied by a corresponding number of fast inverters procured by Consorzio RFX, each one rated for 300 A and 240 V. The key aspects of the design of the aforementioned Power Supply Systems are described in the paper, informing also about the present status of the procurement: their design was completed and some systems were already manufactured, tested and delivered to Japan. [ABSTRACT FROM AUTHOR]