Search

Electro-optical detection systems face numerous challenges due to the complexity and difficulty of targeting controls for "low, slow and tiny" moving targets. In this paper, we present an optimal model of an advanced n-step adaptive Kalman filter and gyroscope short-term integration weighting fusion (nKF-Gyro) method with targeting control. A method is put forward to improve the model by adding a spherical coordinate system to design an adaptive Kalman filter to estimate target movements. The targeting error formation is analyzed in detail to reveal the relationship between tracking controller feedback and line-of-sight position correction. Based on the establishment of a targeting control coordinate system for tracking moving targets, a dual closed-loop composite optimization control model is proposed. The outer loop is used for estimating the motion parameters and predicting the future encounter point, while the inner loop is used for compensating the targeting error of various elements in the firing trajectory. Finally, the modeling method is substituted into the disturbance simulation verification, which can monitor and compensate for the targeting error of moving targets in real time. The results show that in the optimal model incorporating the nKF-Gyro method with targeting control, the error suppression was increased by up to 36.8% compared to that of traditional KF method and was 25% better than that of the traditional nKF method. [ABSTRACT FROM AUTHOR]

A small deviation in the time-delay of the image tracker is essential for improving the tracking precision of an electro-optical system, and for future advances in actuator technology. The core goal of this manuscript is to address issues such as tracking the controller time-delay compensation and the precision of an electro-optical detection system using an advanced filter design, a fire control modeling, and an anti-occlusion target detection system. To address this problem, a small deviation in the time-delay prediction and control method of the image tracker is proposed based on the principle of linear motion transformation. The time-delay error formation is analyzed in detail to reveal the scientific mechanism between the tracking controller feedback and the line-of-sight position correction. An advanced N-step Kalman filtering controller model is established by combining a line-of-sight firing control judgment and a single-sample training anti-occlusion DSST target tracking strategy. Finally, an actuator platform with three degrees of freedom is used to test the optical mechatronics system. The results show that the distribution probability of the line-of-sight measuring error in a circle with a radius of 0.15 mrad is 72%. Compared with the traditional control method, the tracking precision of the optimal method is improved by 58.3%. [ABSTRACT FROM AUTHOR]

The opto-electric servomechanism (OES) plays an important role in obtaining clear and stable images from airborne infrared detectors. However, the inherent torque disturbance and the noisy speed signal cause a significant decline in the inertial stability accuracy and low-speed performances of OESs. Traditional linear control schemes cannot deal with the nonlinear torque disturbance well, and the speed obtained by the finite difference (FD) method cannot effectively balance the tradeoff between the noise filtering and phase delay. Therefore, this paper proposes a strap-down stability control scheme, in the combination of a proportional-integral(PI) controller and a state-augmented Kalman filter (SAKF), where the PI is used to regulate the linear part of the servomechanism, and with the SAKF performing torque disturbance observation and speed estimation simultaneously. The principle and the implementation of the controller are introduced, and the tuning guidelines for the controller parameters are presented as well. Finally, the experimental verifications based on OESs with three transmission types (i.e., the direct-driving, the harmonic-driving, and the rotate vector-driving(RV-driving) OESs) are carried out respectively. The experimental results show that the proposed control scheme can perform better speed observation and torque disturbance compensation for various types of OESs, thus effectively improving the low-speed performance and stability accuracy of the mechanism. [ABSTRACT FROM AUTHOR]

This study presents a compound control algorithm that enhances the servo accuracy and disturbance suppression capability of direct drive components (DDCs). The servo performance of DDCs is easily affected by external disturbance and the deterioration of assembly characteristics due to a lack of deceleration device. The purpose of this study is to compensate for the impact of external and internal disturbances on the system. First, a linear state space model of the system is established. Second, we analyzed the main factors restricting the performance of DDCs which includes sensor noise, friction and external disturbance. Then, a fractional-order proportional integral (FOPI) controller was used to eliminate the steady-state error caused by the time-invariable disturbance which can also improve the system's anti-interference capability. A state-augmented Kalman filter (SAKF) was proposed to suppress the quantization noise and compensate for the time-varying disturbances simultaneously. The effectiveness of the proposed compound algorithm was demonstrated by comparative experiments, demonstrating a maximum 89.34% improvement. The experimental results show that, compared with the traditional PI controller, the FOPISAKF controller can not only improve the tracking accuracy of the system, but also enhance the disturbance suppression ability. [ABSTRACT FROM AUTHOR]