Search

The reactivity of supplementary cementitious materials (SCMs) is a key issue in the sustainability of cement-based materials. In this study, the effect of drying with isopropanol and acetone as well as the interpretation of thermogravimetric data on the results of an R3 test for evaluation of the SCM pozzolanic reaction were investigated. R3 samples consisting of calcium hydroxide, potassium hydroxide, potassium sulphate, water, and SCM were prepared. Besides silica fume, three different types of calcined clays were investigated as SCMs. These were a relatively pure metakaolin, a quartz-rich metakaolin, and a mixed calcined clay, where the amount of other types of clays was two times higher than the kaolinite content. Thermogravimetric analysis (TGA) was carried out on seven-day-old samples dried with isopropanol and acetone to stop the reaction processes. Additional calorimetric measurement of the R3 samples was carried out for evaluation of the reaction kinetics. Results show that drying with isopropanol is more suitable for analysis of R3 samples compared to acetone. The use of acetone results in increased carbonation and TGA mass losses until 40 (isothermal drying for 30 min) and 105 °C (ramp heating), indicating that parts of the acetone remain in the sample, causing problems in the interpretation of TGA data. A mass balance approach was proposed to calculate calcium hydroxide consumption from TGA data, while also considering the amount of carbonates in the sample and TGA data corrections of original SCMs. With this approach, an improvement of the linear correlation of TGA results and heat release from calorimetric measurement was achieved. [ABSTRACT FROM AUTHOR]

[Display omitted] • Stoichiometric model combines kinetics of pozzolanic metakaolin reactions with long-term transformation processes. • Primary pozzolanic metakaolin reactions are divided into C 4 AH 13 and C 2 ASH 8 contributions. • Activation energy for the main (C 2 ASH 8) pozzolanic metakaolin reaction is determined as 84 kJ/mol. • KOH accelerates reaction processes and reduces the activation energy of the pozzolanic metakaolin reaction to 69 kJ/mol. In the pursue of environmentally-friendly binders for the construction industry, metakaolin (MK) has emerged as promising material, with its hardening performance primarily driven by pozzolanic reactions. However, in systems containing MK and calcium hydroxide (CH), transformation reactions from metastable to stable phases, particularly in excessive CH conditions, can adversely affect material properties. To anticipate these processes, this study introduces a stoichiometry-based reaction modeling approach for pozzolanic MK reactions, encompassing both short-term kinetics and long-term transformation processes. The primary pozzolanic reactions of MK are briefly outlined, highlighting two sequential, partially overlapping reactions forming C 4 AH 13 and C 2 ASH 8. Short-term reaction kinetics are modeled using isothermal calorimetry measurements and deconvoluting the two reaction peaks. The model is in good agreement with experimental quantitative X–ray diffraction (qXRD), thermogravimetric analysis (TGA) and helium pycnometer (density, i.e. solid volume) results. Model limitations are discussed based on qualitative scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM/EDX) analysis. Leveraging the proposed model, the temperature dependency of pozzolanic MK reactions is analyzed, revealing an activation energy for the primary reaction of 84 kJ/mol. The model is intended to lay a foundation for designing innovative binder systems based on metakaolin, while paving the way for sustainable construction in the future. [ABSTRACT FROM AUTHOR]

[Display omitted] • The oxide composition designated as metakaolin to calcium hydroxide ratio determines C-A-S-H composition and time dependent (trans)formation reactions. • Stratlingite destabilizes in the presence of calcium hydroxide and transforms to more stable hydrogarnet phases. • Sulfate addition leads to rapid ettringite formation, that may transform to monosulfoaluminate and later to hydrogarnet. • Carbonates stabilize ettringite and favor formation of carboaluminates, which may decompose at later curing ages. • Enhanced pozzolanic metakaolin reactivity modeling for low-carbon binder design requires improved understanding of structure-related dissolution kinetics. Metakaolin (MK) has emerged as a highly promising supplementary material in low carbon binders for the construction industry. In wide range of applications, from lime to cement–based materials, its hardening performance relies on the pozzolanic reactivity between MK and calcium hydroxide (CH), resulting in the formation of diverse calcium-aluminate/silicate hydrates. The reaction sequence is affected by specific conditions dictated by the binder system employed in various applications. To advance the design of binders that reduce the carbon emissions, a systematical review on MK-based reactions is crucial. This review encompasses a broad range of MK/CH ratios and examines the effect of alkali hydroxides, carbonates and sulfates. The focus is on the formation and stability of pozzolanic hydrate phases over time and under different curing temperatures. Additionally, the review addresses the characteristics that directly affect MK reactivity, such as the (calcined) clay structure and the dissolution of the reactants. The systematic findings shed light on the hydrate phase assemblage, enabling a better understanding of the reaction mechanisms in complex systems, like MK cementitious blends. The results of this review serve as a valuable foundation for the development of novel "low-carbon" binder designs and compositions for both cementitious and lime-based binders. [ABSTRACT FROM AUTHOR]