Search

This paper reports surface treatment effect on liquid crystalline blue phase morphology and electro-optical performances at various temperatures. We have succeeded to achieve homogeneous monodomain blue phase morphology by surface treatment. Operating voltage and hysteresis of the proposed device is greatly reduced compared to the non surface treated cell, owing to dramatic increase in Kerr constant. Uniform mono domain morphology has better electric field withstand capability so that its original texture restored after electric field addressing. [ABSTRACT FROM AUTHOR]

- Three different blue-phase I liquid-crystal samples with different grain-size distribution were studied. Polycrystalline platelet grains reflects light in the visible region and have been observed under a polarizing optical microscope. Green and blue grain areas have been measured and then the statistical histogram by the Gaussian distribution function was fitted and the mean grain size was calculated. The effect of hysteresis on grain size has been compared for the three samples. Hysteresis depends explicitly on the grain-size distribution. Large grain size has revealed less hysteresis, while small grain size depicted pronounced hysteresis. [ABSTRACT FROM AUTHOR]

A light scatter-free, transparent, thermally stable, optically isotropic liquid crystal mixture was achieved among three different mixtures of liquid crystal E7: Norland Optical Adhesive 65 with concentrations 30:70, 40:60, and 50:50 wt%. The 50:50 wt% mixture exhibited the best performed optically isotropic state when exposed to ultraviolet light of intensity 150 mW/cm 2 for droplet formation. The high intensity ultraviolet light curing process induces nano-sized liquid crystal droplets in the polymer matrix of average droplet size 218 nm, characterized by scanning electron microscope. The analyzed result shows an excellent contrast ratio (CR) equal to 1574 at the normal direction and a high CR at a wide viewing angle. The magnitude of Kerr constant in these nano-sized PDLC was ~7.36×10 −10 mV −2 , which was more than ~330 times that of a conventional Kerr material such as nitrobenzene. Unprecedented fast rising and falling times of approximately 385 µs and 1.1 ms, respectively, were achieved for the device. This high-performance material also eliminated the long-term hurdle of hysteresis to make it a promising candidate for next-generation display and photonic technologies. [ABSTRACT FROM AUTHOR]