Search

This study investigates the symmetry change in joint angle and joint moment of knee joints following a Running-Induced Fatigue counter movement Jump. Twelve amateur runners volunteered to participate in the study. A prolonged running protocol was used to induce fatigue. Joint angle and moment were recorded during the push and flexion phase of the CMJ before and immediately after fatigue. Borg scale (RPE>17) and real-time heart rate monitoring (HR>90%HRmax) were used to confirm running fatigue. Symmetry function (SF) was used to assess the symmetry of the knee Angle and moment variation parameters over the entire push-off and landing phases based on time series analysis. Paired sample t-test was used to examine changes in SF before and after acute fatigue. The Angle and moment of the knee are asymmetrical in all planes (SF > 0.05), with SF ranging from 5 to 130% in angle and 5-110% in moment. There was a significant increase in knee joint angle asymmetry in the horizontal plane during the push-off and landing stage following the prolonged - Running Protocol implementation. These increases in asymmetry are mainly caused by excessive external rotation of the dominant knee joint. These findings indicate that fatigue-induced changes during CMJ may progress knee movement pattern asymmetry in the horizontal plane. [ABSTRACT FROM AUTHOR]

The aim of this study is to review the valuable lower limb biomechanical contribution to table tennis topspin forehand. Databases included Scopus, PubMed, and Web of science. In this case, 19 articles were selected for the systematic review. The mechanics of the plantar, lower limb joints kinematics and kinetics, muscle activity, and racket-joint relationship are described through gender, performance level, and footwork. The study found that the hip movement characteristics and the hip muscle group activity following a proximal-to-distal sequence strategy significantly contributed to the maximum acceleration of the racket. Optimizing the motion strategy of the ankle and plantar as well as the ankle muscle group activity is beneficial for the transmission of energy in the kinetic chain. Muscle groups around the ankle and subtalar joints are heavily activated during landing to maintain foot stability during the landing phase. Lower limb muscle development plays an important role in movement control and stability as well as sports injury prevention in table tennis footwork during the performance of the topspin forehand. Furthermore, physical development levels and anatomical differences (such as hip and lower trunk muscle strength differences), maybe the main reasons for gender differences observed during the topspin forehand. Systematically summarizing this valuable information can contribute to athletes' and coaches' knowledge to enhance topspin forehand performance and training regimes. We suggest that future research could consider the joint contact forces, ball movement, and ball-racket impact during a performance of topspin forehand. [ABSTRACT FROM AUTHOR]

Background: Running-induced fatigue has received much attention in recent years. However, very few studies have investigated the effect of fatigue on lower limb biomechanics in three planes.Objective: This study was designed to investigate biomechanical changes in the lower limb in three planes following running-induced fatigue.Methods: Fifteen male novice runners were included in the study and performed three running trails pre- and post-fatigue. Wilcoxon signed-rank tests or paired-sample t tests were used to analyze the data.Results: Lower limb biomechanics significantly changed, especially kinetic parameters, when fatigue occurred. The peak ankle dorsiflexion angle and range of motion of the knee joint in the frontal plane increased. As for kinetic parameters, in the ankle joint, the peak external rotation moment, peak abduction power and peak internal rotation power increased. In the knee joint, the peak abduction and external rotation moment, peak flexion power, peak adduction and abduction power also increased. In the hip joint, the peak flexion moment was decreased, peak adduction and abduction moment, peak external rotation power, peak adduction and abduction power moment were increased.Conclusion: The findings of this study may contribute to our understanding of the impact of fatigue and provide some helpful information to prevent related injuries. [ABSTRACT FROM AUTHOR]

Backward walking (BW) has been extensively used in athletic training and orthopedic rehabilitation as it may have value for enhancing balance. This study identified the differences in foot intersegment kinematics (forward walking (FW) vs. time-reversed BW) and plantar pressure parameters of 16 healthy habitually shod individuals walking FW and BW using flexible shoes (SH) and under barefoot conditions (BF). BW was found to have shorter stride length (SL) and higher stride frequency (SF) under BF conditions compared with SH, which indicates a better BW gait stability under BF conditions. Decreased HX/FF dorsiflexion at HO in BW induces less plantar aponeurosis tension which may inhibit the windlass mechanism compared to FW walking. Increased forefoot relative to hindfoot (FF/HF) pronation and sequentially hindfoot relative to tibia (HF/TB) eversion combined with medially distributed plantar pressure and a higher plantar contact area in the medial side in BW-BF maybe beneficial in maintaining balance. These results indicate that BW training may be more reliable under BF conditions compared to the SH conditions based on greater sensory information feedback from the plantar area resulting in better biomechanical behavior. [ABSTRACT FROM AUTHOR]

Torsional stiffness of athletic footwear plays a crucial role in preventing injury and improving sports performance. Yet, there is a lack of research focused on the biomechanical effect of torsional stiffness in badminton shoes. This study aimed to comprehensively investigate the influence of three different levels of torsional stiffness in badminton shoes on biomechanical characteristics, sports performance, and injury risk in badminton players. Fifteen male players, aged 22.8 ± 1.96 years, participated in the study, performing badminton-specific tasks, including forehand clear stroke [left foot (FCL) and right foot (FCR)], 45-degree sidestep cutting (45C), and consecutive vertical jumps (CVJ). The tasks were conducted wearing badminton shoes of torsional stiffness measured with Shore D hardness 50, 60, and 70 (referred to as 50D, 60D, and 70D, respectively). The primary biomechanical parameters included ankle, knee, and MTP joint kinematics, ankle and knee joint moments, peak ground reaction forces, joint range of motion (ROM), and stance time. A one-way repeated measures ANOVA was employed for normally distributed data and Friedman tests for non-normally distributed data. The 70D shoe exhibited the highest ankle dorsiflexion and lowest ankle inversion peak angles during 45C task. The 60D shoe showed significantly lower knee abduction angle and coronal motions compared to the 50D and 70D shoes. Increased torsional stiffness reduced stance time in the FCR task. No significant differences were observed in anterior-posterior and medial-lateral ground reaction forces (GRF). However, the 70D shoe demonstrated higher vertical GRF than the 50D shoe while performing the FCR task, particularly during 70% - 75% of stance. Findings from this study revealed the significant role of torsional stiffness in reducing injury risk and optimizing performance during badminton tasks, indicating that shoes with an intermediate level of stiffness (60D) could provide a beneficial balance between flexibility and stability. These findings may provide practical references in guiding future badminton shoe research and development. Further research is necessary to explore the long-term effects of altering stiffness, considering factors such as athletic levels and foot morphology, to understand of the influence of torsional stiffness on motion biomechanics and injury prevalence in badminton-specific tasks. [ABSTRACT FROM AUTHOR]

Background: Normative foot kinematic and kinetic data with different walking speeds will benefit rehabilitation programs and improving gait performance. The purpose of this study was to analyze foot kinematics and kinetics differences between slow walking (SW), normal walking (NW) and fast walking (FW) of healthy subjects. Methods: A total of 10 healthy male subjects participated in this study; they were asked to carry out walks at a self-selected speed. After measuring and averaging the results of NW, the subjects were asked to perform a 25% slower and 25% faster walk, respectively. Temporal-spatial parameters, kinematics of the tibia (TB), hindfoot (HF), forefoot (FF) and hallux (HX), and ground reaction forces (GRFs) were recorded while the subjects walked at averaged speeds of 1.01 m/s (SW), 1.34 m/s (NW), and 1.68 m/s (FW). Results: Hindfoot relative to tibia (HF/TB) and forefoot relative to hindfoot (FF/HF) dorsiflexion (DF) increased in FW, while hallux relative to forefoot (HX/FF) DF decreased. Increased peak eversion (EV) and peak external rotation (ER) in HF/TB were observed in FW with decreased peak supination (SP) in FF/HF. GRFs were increased significantly with walking speed. The peak values of the knee and ankle moments in the sagittal and frontal planes significantly increased during FW compared with SW and NW. Discussion: Limited HF/TB and FF/HF motion of SW was likely compensated for increased HX/FF DF. Although small angle variation in HF/TB EV and FF/HF SP during FW may have profound effects for foot kinetics. Higher HF/TB ER contributed to the FF push-off the ground while the center of mass (COM) progresses forward in FW, therefore accompanied by higher FF/HF abduction in FW. Increased peak vertical GRF in FW may affected by decreased stance duration time, the biomechanical mechanism maybe the change in vertical COM height and increase leg stiffness. Walking speed changes accompanied with modulated sagittal plane ankle moments to alter the braking GRF during loading response. The findings of foot kinematics, GRFs, and lower limb joint moments among healthy males may set a reference to distinguish abnormal and pathological gait patterns. [ABSTRACT FROM AUTHOR]

Introduction: Due to the more resilient biomaterials, problems related to wear in total knee replacements (TKRs) have decreased but not disappeared. In the design-related factors, wear is still the second most important mechanical factor that limits the lifetime of TKRs and it is also highly influenced by the local kinematics of the knee. During wear experiments, constant load and slide-roll ratio is frequently applied in tribo-tests beside other important parameters. Nevertheless, numerous studies demonstrated that constant slide-roll ratio is not accurate approach if TKR wear is modelled, while instead of a constant load, a flexion-angle dependent tibiofemoral force should be involved into the wear model to obtain realistic results. Methods: A new analytical wear model, based upon Archard's law, is introduced, which can determine the effect of the tibiofemoral force and the varying slide-roll on wear between the tibiofemoral connection under standard and non-standard squat movement. Results: The calculated total wear with constant slide-roll during standard squat was 5.5 times higher compared to the reference value, while if total wear includes varying slide-roll during standard squat, the calculated wear was approximately 6.25 times higher. With regard to non-standard squat, total wear with constant slide-roll during standard squat was 4.16 times higher than the reference value. If total wear included varying slide-roll, the calculated wear was approximately 4.75 times higher. Conclusions: It was demonstrated that the augmented force parameter solely caused 65% higher wear volume while the slide-roll ratio itself increased wear volume by 15% higher compared to the reference value. These results state that the force component has the major effect on wear propagation while non-standard squat should be proposed for TKR patients as rehabilitation exercise. Edizioni Internazionali [ABSTRACT FROM AUTHOR]

Purpose: This study examined differences in ankle motion and plantar pressure between habitually barefoot male (HBM) and habitually shod male (HSM) during vertical jump. Methods: Eighteen habitually barefoot males and twenty habitually shod males volunteered to join the test. Distance between hallux and second toe was measured with Easy-Foot-Scan. Plantar pressure and ankle kinematics were measured with EMED force platform and Vicon motion analysis system respectively. T test was taken to analyse the significant differences using Stata 12.0 software. Results: The distance between hallux and other toes in HBM was greater than it in HSM. HBM showed larger plantar loading under hallux and medial forefoot, while HSM showed lager plantar loading under medial and central forefoot. HBM had smaller ankle plantarflexion, eversion and external rotation than HSM. Conclusion: Findings of this study provide basic information for further studies on different hallux/toe function in motion control between habitually shod and barefoot populations. [ABSTRACT FROM AUTHOR]