Search

The past decades have seen increasing interest in developing pyrolysis pathways to produce biofuels and bio-based chemicals from lignocellulosic biomass. Pyrolysis is a key stage in other thermochemical conversion processes, such as combustion and gasification. Understanding the reaction mechanisms of biomass pyrolysis will facilitate the process optimization and reactor design of commercial-scale biorefineries. However, the multiscale complexity of the biomass structures and reactions involved in pyrolysis make it challenging to elucidate the mechanism. This article provides a broad review of the state-of-art biomass pyrolysis research. Considering the complexity of the biomass structure, the pyrolysis characteristics of its three major individual components (cellulose, hemicellulose and lignin) are discussed in detail. Recently developed experimental technologies, such as Py-GC–MS/FID, TG-MS/TG-FTIR, in situ spectroscopy, 2D-PCIS, isotopic labeling method, in situ EPR and PIMS have been employed for biomass pyrolysis research, including online monitoring of the evolution of key intermediate products and the qualitative and quantitative measurement of the pyrolysis products. Based on experimental results, many macroscopic kinetic modeling methods with comprehensive mechanism schemes, such as the distributed activation energy model (DAEM), isoconversional method, detailed lumped kinetic model, kinetic Monte Carlo model, have been developed to simulate the mass loss behavior during biomass pyrolysis and to predict the resulting product distribution. Combined with molecular simulations of the elemental reaction routes, an in-depth understanding of the biomass pyrolysis mechanism may be obtained. Aiming to further improve the quality of pyrolysis products, the effects of various catalytic methods and feedstock pretreatment technologies on the pyrolysis behavior are also reviewed. At last, a brief conclusion for the challenge and perspectives of biomass pyrolysis is provided. [ABSTRACT FROM AUTHOR]

The influence of torrefaction on cellulose structural characteristics and the resulting pyrolysis behavior was investigated in this study. Torrefaction reduced O/C ratio in cellulose and increased its high heating value. The crystallinity of cellulose increased slightly first and then decreased sharply with the increase of torrefaction temperature, which could be ascribed to competitive degradation between crystalline region and amorphous region, as indicated by 13 C CP/MAS NMR analysis. Besides, the cleavage of β-1,4-glycosidic bond and the dehydration of hydroxyl were the major reactions occurring in torrefaction. Avrami-Erofeev model was found to be the most suitable kinetic reaction model for explaining the thermogravimetric weight loss during the pyrolysis of the raw and torrefied cellulose. A distributed activation energy model based on Avrami-Erofeev model was subsequently used to reveal the pyrolytic kinetics. It was found that the changes in cellulose structure influenced the kinetic parameters greatly. Torrefaction also changed pyrolytic product distribution. The yields of furfural, alicyclic ketones and anhydrosugars increased while that of 5-hydroxymethyl-furfural decreased as torrefaction temperature increased. [ABSTRACT FROM AUTHOR]

This study proposed a sequential and coupling method to determine the comprehensive kinetic models for pyrolysis of cellulose, hemicellulose and lignin. Isoconversional method was employed to find the correlation between activation energy and conversion rate. Cellulose pyrolysis could be interpreted by one-step global reaction model, while pyrolysis of hemicellulose and lignin could be divided into three stages and two stages, respectively, in which competitive parallel reactions occurred. Coats-Redfern method and Kissinger method were subsequently used to obtain the reaction model f(α). Particularly, a new mean reaction model f′(α) was introduced to deal with the complex competitive parallel reactions. It was proposed that pyrolysis of cellulose followed Avrami-Erofeev (m = 2) nucleation model, while pyrolysis of hemicellulose and lignin could be described by reaction-order model. The other kinetic parameters and the contribution of each parallel reaction to devolatilization were further analyzed based on the modified distributed activation energy models. And the detailed kinetic models for pyrolysis of biomass components were finally obtained. [ABSTRACT FROM AUTHOR]