Search

Rainfall with heavy intensity and long duration is a main inducing factor that triggers landslides on anti-inclined rock slopes. Numerous interbedded anti-inclined rock (IAR) slopes in Southwest China frequently experience mountain collapses and landslides under heavy rainfall. Therefore, it is necessary to study the failure mode of IAR slopes during rainfall. In this study, the Linda landslide and Mari landslide, typical IAR landslides in the study area, were used as examples to build a physical model of IAR slopes under continuous rainfall conditions, and a self-made rainfall simulation system was used to mimic natural rainfall conditions. The multi-physics data of displacement, velocity, stress, strain, pore water pressure, and acoustic signals in model deformation and failure under rainfall conditions were obtained using multi-field monitoring technology. In addition, the materials' water content and mechanical parameters at different locations of the model were obtained after the experiment. The analysis results indicate that: in the first and middle periods of rainfall, the slope model experienced a shallow local deformation and a holistic toppling deformation; until the late rain, the failure of the IAR slope caused by rainfall finally presented a typical failure mode of multiple failures and collapses of regressive landslides. According to its multi-field evolution characteristics, the velocity and acoustic signals were highly consistent with the failure characteristics of the model, which could be used as landslide early warning indicators. In addition, it was observed that the shape of the multi-slip surfaces generated by the model was a concave double straight line extending from the slope toe to the slope surface and sharing the failure section at the slope toe. Finally, the deformation and failure process of the model could be speculated to be divided into five stages based on the deformation behavior and multi-field physical data feature: the initial interlayer dislocation stage, the deformation stage, the crack propagation stage, the retrogressive failure stage, and the holistic failure stage. The failure mode and deformation mechanism of IAR slopes under rainfall were revealed in the model test, which could provide appropriate guidance for the analysis and evaluation of similar landslides. Highlights: The failure of the interbedded anti-inclined rock slope model caused by rainfall presented a typical failure mode of multiple failures and collapses of regressive landslides. The velocity and acoustic signals are highly consistent with the failure characteristics of the model, and the shape of the multi-slip surfaces was a concave double straight line extending from the slope toe to the slope surface. According to its multi-field evolution characteristics, the deformation and failure process of the model under rainfall conditions can be divided into five stages. [ABSTRACT FROM AUTHOR]

Block-flexure toppling failures in interbedded anti-inclined rock (IAR) slopes present significant risks to infrastructure and safety. Based on the Linda landslide field investigations, this study conducted a series of physical modelling tests encompassing 15 slope angle and bedding angle combinations. The aim of 15 sets of tests was to explore the deformation and failure mechanisms in IAR slopes. The observations during the deformation and failure stages elucidated how changes in slope and bedding angles influence rock mass deformation and failure characteristics. The findings highlight that slope angle critically impacts IAR slope stability, while bedding angle notably affects deformation depth, failure area, and failure surface configuration. IAR slopes with bedding angles less than 60° tend to exhibit shallow, single-surface failures with the linear failure surface, whereas bedding angles exceeding 70° lead to deep-seated, large-area, multi-surface failures characterised by double-folded failure surfaces. The magnitude of the failure inclination angle increases with slope and bedding angles, ranging from 0 to 35°. Furthermore, deformation and failure in IAR slopes involve the progressive extension of cracks from the slope crest to the interior, eventually reaching the slope toe. Finally, the block-flexure toppling process in IAR slopes can be divided into an incubation deformation stage and an accelerated deformation stage, and based on curve characteristics, different deformation modes of the IAR slopes can be further classified as stepwise cumulative accelerated deformation mode and leap deformation mode. Highlights: Fifteen cases of physical modelling tests covering various slope angles and bedding angles were conducted to replicate the deformation and failure mechanism in interbedded anti-inclined rock (IAR) slopes; Slope angle plays a pivotal role in determining the stability of IAR slopes, whereas bedding angle controls slope deformation depth, failure area, and failure surface characteristics; The IAR landslide is a progressive failure process that extends from the slope crest to the slope toe; The deformation process of IAR slopes can be categorised into the incubation deformation stage and the accelerated deformation stage. Additionally, the deformation mode can be further classified as either stepwise cumulative accelerated or leap deformation modes. [ABSTRACT FROM AUTHOR]

Toppling deformations generally develop in interbedded anti-inclined rock slopes in the upper reaches of the Yalong River in southwest China. With the characteristics of large scales, strong deformation degrees and complex deformation modes, toppling bodies may eventually lead to instability failure in the form of landslides, which seriously threaten the construction and operation of hydropower stations in the basin. Taking three typical examples of toppling failures for interbedded anti-inclined rock slopes in the basin, the sensitivity analysis of 19 impact factors affecting the toppling deformation of this type of slope is obtained via the Grey correlation method and UDEC. The results show that the geometric parameters represented by slope angles are the most sensitive to toppling deformation, the mechanical parameters of joints are more sensitive to toppling deformation than the physical and mechanical parameters of intact rocks, and the sensitivities of the parameters of sandstone and slate gradually converge in the deformation process. [ABSTRACT FROM AUTHOR]

Jurassic strata prone to slope failure are widely distributed in the Three Gorges Reservoir region. The limit equilibrium method is generally used to analyze the stability of rock slopes that have a single failure plane. However, the stability of a stratified rock mass cannot be accurately estimated by this method because different bedding planes have variable shear strength parameters. A modified limit equilibrium method is presented with variable water pressure and shear strength used to estimate the stability coefficient of a sloping mass of stratified rock and to identify the potential sliding surface. Furthermore, an S-curve model is used to define the spatial variations of the shear strength parameters c and ϕ of the bedding plane and the tensile strength of the rock mass. This model can also describe the variation of strength parameters with distance from the slope surface, which depends on the reservoir water level. Also, it is used to evaluate the stability of the Qianjiangping landslide, located at Shazhenxi Town, Zigui County, Three Gorges Reservoir area, China. The results show the most probable sliding surface is the interface between a slightly weathered layer and subjacent bedrock. When reservoir water rises above the elevation of the slide mass toe, the stability coefficient of the slope declines sharply. When the reservoir water level is static at 135 m, the stability coefficient decreases gradually as the phreatic line changes as a result of heavy rainfall. [ABSTRACT FROM AUTHOR]

Due to complex geological structures and strong crustal activity, geological disasters occur frequently in the upper reaches of the Yalong River, Southwest China. Toppling failure on anti-dip rock slopes is a common phenomenon; in particular, after the Wenchuan earthquake in 2008, numerous landslides caused by toppling deformation occurred in reservoir areas, seriously threatening the construction and operation of large-scale water conservancy projects and hydropower projects. Taking three typical toppling slopes in the basin as research objects, the dynamic behaviour, failure evolution, and failure plane location of toppling failure under seismic waves were investigated by shaking table tests and UDEC simulations. The test results indicated that slope angle and stratum dip angle were both inversely proportional to the stability of the slope in the tested ranges. The failure evolution of toppling on anti-dip rock slopes could be divided into four stages: (1) the development stage of tensile cracks in the strata; (2) the formative stage of tensile cracks at the crest of the slope; (3) the formative stage of toppling zones; and (4) the failure stage. Two equations were proposed to reveal the relationships between the surface peak ground acceleration and the horizontal depth of the failure plane and displacement of the slope surface. The propagation and coalescence of discontinuous cross joint in the slope and the entire failure evolution simulated by the UDEC damage model agreed well with the shaking table test results. [ABSTRACT FROM AUTHOR]