Search

The increasing number of landslide hazards worldwide has placed greater demands on the production and updating of landslide inventory maps. As an important data source for landslide detection, interferometric synthetic aperture radar (InSAR) data processing is time-consuming and also requires specialized knowledge, which severely hinders its widespread application. At present, a new cloud-based online platform, i.e., Alaska Satellite Facility's Hybrid Pluggable Processing Pipeline (ASF HyP3) was developed for massive SAR data processing. In this study, combining the HyP3 online platform and Stacking-InSAR method, we constructed a new easy-to-use processing chain for rapidly identifying slow-moving landslides over large areas. With this processing chain, a total of 923 interferometric pairs covering an area of over 1800 km2 were processed within a few hours (about 4 to 5 h). A total of 81 slow-moving landslides were immediately detected and mapped using Stacking-InSAR method, of which 65 landslides were confirmed by previous studies and 16 landslides were newly detected. Results show that the new processing chain can greatly improve the efficiency of wide-area landslide mapping and is expected to serve as an effective tool for rapid updating the existing landslide inventories and contribute to the prevention and management of geological hazards. [ABSTRACT FROM AUTHOR]

Due to various factors such as urban development, climate change, and tectonic movements, landslides are a common geological phenomenon in the Qinghai–Tibet Plateau region, especially on both sides of a road, where large landslide hazards often result in traffic disruptions and casualties. Identifying the spatial distribution of landslides and monitoring their stability are essential for predicting landslide occurrence and implementing prevention measures. In this study, taking the Kangding-Batang section of Shanghai-Nyalam Road as the study area, we adopted a semi-automated time-series interferometric synthetic aperture radar (InSAR) method to identify landslides and monitor their activity. A total of 446 Sentinel-1 ascending and descending SAR images from January 2018 to December 2021 were thus collected and processed by using open-source InSAR processing software. After a series of error corrections, we obtained surface deformation maps covering the study area, and a total of 236 potential landslides were subsequently identified and classified into three categories, namely slow-sliding rockslides, debris flows, and debris avalanches, by combining deformation maps, optical images, and a digital elevation model (DEM). For a typical landslide, we performed deformation decomposition and analyzed the relationship between its deformation and rainfall, revealing the contribution of rainfall to the landslide. In addition, we discussed the effect of SAR geometric distortion on landslide detection, highlighting the importance of joint ascending and descending observations in mountainous areas. We analyzed the controlling factors of landslide distribution and found that topographic conditions are still the dominant factor. Our results may be beneficial for road maintenance and disaster mitigation. Moreover, the entire processing is semi-automated based on open-source tools or software, which provides a paradigm for landslide-related studies in other mountainous regions of the world. [ABSTRACT FROM AUTHOR]

The identification and early warning of potential landslides can effectively reduce the number of casualties and the amount of property loss. At present, interferometric synthetic aperture radar (InSAR) is considered one of the mainstream methods for the large-scale identification and detection of potential landslides, and it can obtain long-term time-series surface deformation data. However, the method of identifying anomalous deformation areas using InSAR data is still mainly manual delineation, which is time-consuming, labor-consuming, and has no generally accepted criterion. In this study, a two-stage detection deep learning network (InSARNet) is proposed and used to detect anomalous deformation areas in Maoxian County, Sichuan Province. Compared with the most commonly used detection models, it is demonstrated that the InSARNet has a better performance in the detection of anomalous deformation in mountainous areas, and all of the quantitative evaluation indexes are higher for InSARNet than for the other models. After the anomalous deformation areas are identified using the proposed model, the possible relationship between the anomalous deformation areas and potential landslides is investigated. Finally, the fact that the automatic and rapid identification of potential landslides is the inevitable trend of future development is discussed. [ABSTRACT FROM AUTHOR]

Identifying and assessing the disaster risk of landslide-prone regions is very critical for disaster prevention and mitigation. Owning to their special advantages, neural network algorithms have been widely used for landslide susceptibility mapping (LSM) in recent decades. In the present study, three advanced neural network models popularly used in relevant studies, i.e. artificial neural network (ANN), one dimensional convolutional neural network (1D CNN) and recurrent neural network (RNN), were evaluated and compared for LSM practice over the Qingchuan County, Sichuan province, China. Extensive experimental results demonstrated satisfactory performances of these three neural network models in accurately predicting susceptible regions. Specifically, ANN and 1D CNN models yielded quite consistent LSM results but slightly differed from those of RNN model spatially. Nevertheless, accuracy evaluations revealed that the RNN model outperformed the other two models both qualitatively and quantitatively but its complexity was relatively high. Experiments concerning training hyper-parameters on the performance of neural network models for LSM suggested that relatively small batch size values with Tanh activation function and SGD optimizer are essential to improve the performance of neural network models for LSM, which may provide a thread to help those who apply these advanced algorithms to improve their efficiency. [ABSTRACT FROM AUTHOR]

A Mw=6.5 earthquake struck the Jiuzhaigou region of Sichuan Province, China, at 21:19 LT on Tuesday, 8 August 2017, and triggered a large number of landslides. For mitigating the damages of earthquake-triggered landslides to individuals and infrastructures of the earthquake-affected region, a comprehensive landslide susceptibility mapping was attempted with an integrated weighted index model by combining the frequency ratio and the analytical hierarchy process approaches under a GIS-based environment in the heavily earthquake-affected Zhangzha town of the Jiuzhaigou region. For this purpose, a total number of 842 earthquake-triggered landslides were visually interpreted and located from Sentinel-2A images acquired before and after the earthquake at first, and then the recognized landslides were randomly split into two groups to establish the earthquake-triggered landslide inventory, among which 80 % of the landslides were used for training the integrated model and the remaining 20 % for validation. Nine landslide controlling factors were considered including slope, aspect, elevation, lithology, distance from faults, distance from rivers, land use–land cover, normalized difference vegetation index and peak ground acceleration. The frequency ratio was utilized to evaluate the contribution of each landslide controlling factor to landslide occurrence, and the analytical hierarchy process was used to analyse the mutual relationship between landslide controlling factors. Finally, the landslide susceptibility map was produced by using weighted overlay analysis. Furthermore, an area under the curve approach was adopted to comprehensively evaluate the performance of the integrated weighted index model, including the degree of model fit and model predictive capability. The results demonstrated the reliability and feasibility of the integrated weighted index model in earthquake-triggered landslide susceptibility mapping at a regional scale. The generated map can help engineers and decision makers assess and mitigate hazards of the earthquake-triggered landslides to individuals and infrastructures of the earthquake-affected region. [ABSTRACT FROM AUTHOR]

• A CNN-based approach was applied to map the landslide susceptibility. • A novel multiscale sampling strategy was proposed to generate the training data. • Three machine learning methods were applied for comparison. • CNN trained with multiscale fusion data can generate accurate and reliable results. Landslides are one of the most widespread natural disasters and pose severe threats to people, properties, and the environment in many areas. Landslide susceptibility mapping (LSM) has proven useful in designing landslide mitigation strategies for reducing disaster risk and societal and economic losses, which are essential for land use planning, hazard prevention, and risk management. Recent efforts for improving accuracies of LSM have focused on the utilization of convolutional neural network (CNN) in some image-related tasks, however, due to the inconsistency of data representation, CNN-related studies need to be further explored. In this study, a CNN-based approach for LSM was proposed and experimentally applied in a Jiuzhaigou region where a catastrophic earthquake taken place on 8 August 2017, in Sichuan, China. To address the issue of data representation in the CNN model, we proposed a multiscale sampling strategy which to our knowledge is novel in LSM. In this way, the multiscale training samples (i.e., small scale, medium scale and large scale) were generated from the selected eleven landslide causative factors. The success-rate curve (SRC) and prediction-rate curve (PRC) were applied to validate the LSM results, and three conventional machine learning algorithms, i.e., logistic regression, multi-layer perceptron (MLP) neural network and radial basis function (RBF) neural network, were attempted for comparison. Specifically, MLP neural network achieved the best performance among three machine learning methods, with the area under the SRC (AU-SRC) and PRC (AU-PRC) values of 81.18% and 82.84%, respectively. Nevertheless, the AU-SRC and AU-PRC values of CNN-based approach reached to 97.45% and 88.02%, which were about 16% and 6% higher than that of the MLP neural network, respectively. The present study demonstrated both the excellent goodness-of-fit and strong prediction ability of CNN-based approach for LSM, which also showed the effectiveness and feasibility of the proposed multiscale sampling strategy. Additionally, present study revealed that the spatial data close to the landslide location might be more suitable to predict the probability of the landslide occurrence. Finally, we expect that the deep learning method based on multiscale data representation will advance our ability to assess the landslide susceptibility and raise the awareness of landslide disasters. [ABSTRACT FROM AUTHOR]