Search

Timely evaluation of landslide risk based on displacement data is crucial for the effective warning of landslide events. However, the complexity and diversity of displacement curves obtained in the field make the selection of evaluation criteria and thresholds challenging and subjective. Thus, this study proposes a new early warning criterion called the deformation probability index (DPI) to overcome this limitation. By analyzing features of landslide displacement curves obtained from the field, four linetypes were identified, and differences in velocity data between pre-failure and post-failure landslides were summarized from a probabilistic perspective. Subsequently, the DPI is defined to assess the early warning level of a landslide by converting observed velocity values into standardized velocity values using cumulative distribution function standardization. The resulting DPI values are divided into five early warning intervals with three alerting levels to indicate the relative stability of the landslide. Applying the proposed method to 16 landslides from around the world demonstrates the effectiveness of the DPI criterion in evaluating landslide risk, with a high correlation between alerting levels and observed landslide occurrences. The DPI criterion demonstrates notable sensitivity exclusively to displacement velocity and monitoring frequency, exhibiting remarkable generality and accuracy, thus offering a new method for landslide early warning. [ABSTRACT FROM AUTHOR]

Analyzing and quantifying the deformation process of landslides is of paramount importance in facilitating landslide early warning. As such, this study is committed to proposing a universal phenomenological model for deformation stages division and early warning of landslides based on the kinematic features. First, five landslide deformation patterns were classified based on the creep theory, and suggestions for stage division of each deformation pattern are presented. Then, the statistical characteristics of landslide velocity were analyzed, and a probability-based deformation stage division method was proposed. Finally, the Comprehensive Standardized Deformation Index (CSDI) model, which includes the calculation of the CSDI M - M (Min-Max normalization) and CSDI M (Mean normalization) was proposed and verified in 24 landslides worldwide. The results show that, except for the oscillating pattern, the CSDI M - M is feasible in the stages division of all deformation patterns with a strong correspondence with the actual state of the landslides. The CSDI M is a reliable landslide warning criterion and threshold determination method, as it is effective in the early warning of imminent landslides with a low false alarm rate. The CSDI model provides new insight into the division of landslide deformation stages and landslide risk assessment. [ABSTRACT FROM AUTHOR]

With the widespread application of machine learning methods, the continuous improvement of forecast accuracy has become an important task, which is especially crucial for landslide displacement predictions. This study aimed to propose a novel prediction model to improve accuracy in landslide prediction, based on the combination of multiple new algorithms. The proposed new method includes three parts: data preparation, multi-swarm intelligence (MSI) optimization, and displacement prediction. In the data preparation, the complete ensemble empirical mode decomposition (CEEMD) is adopted to separate the trend and periodic displacements from the observed cumulative landslide displacement. The frequency component and residual component of reconstructed inducing factors that related to landslide movements are also extracted by the CEEMD and t-test, and then picked out with edit distance on real sequence (EDR) as input variables for the support vector regression (SVR) model. MSI optimization algorithms are used to optimize the SVR model in the MSI optimization; thus, six predictions models can be obtained that can be used in the displacement prediction part. Finally, the trend and periodic displacements are predicted by six optimized SVR models, respectively. The trend displacement and periodic displacement with the highest prediction accuracy are added and regarded as the final prediction result. The case study of the Shiliushubao landslide shows that the prediction results match the observed data well with an improvement in the aspect of average relative error, which indicates that the proposed model can predict landslide displacements with high precision, even when the displacements are characterized by stepped curves that under the influence of multiple time-varying factors. [ABSTRACT FROM AUTHOR]

A large number of laboratory investigations related to the permeability have been conducted on the sliding zones. Yet little attention has been paid to the particular sliding zones of the slide-prone Badong Formation. Here, we experimentally investigate the permeability nature and the mechanism of seepage in the viscous sliding zone of the Huangtupo Landslide. Saturated seepage tests have been performed first with consideration of six dry densities and thirteen hydraulic gradients, in conjunction with the mercury intrusion porosimetry test and scanning electron microscopy test for the microstructure analysis after seepage. The results show that seepage in the sliding zone soil does not follow Darcy's Law, since there is a threshold hydraulic gradient (i0) below which no flow is observed and a critical hydraulic gradient (icr) over which the hydraulic conductivity (K) tends to be stable. The percentage of bound water could be responsible for the occurrence of i0 and icr. Furthermore, pore size distributions (PSD) less than 0.6 µm and between 10 and 90 µm exhibit positive and negative correlations with the i0, respectively, indicating that the i0 is related to the PSD. The mechanism accounting for this result is that pore water pressure forces fine clay particles into the surrounding large pores and converts arranged particles to discretely distributed ones, thereby weakening the connectivity of pores. The seepages in the sliding zones behave differently from that in the sliding mass and sliding bed in response to the permeability. [ABSTRACT FROM AUTHOR]

In the Three Gorges Reservoir area (TGRA), landslides typically exhibit slow-moving characteristic deformations in response to seasonal changes in precipitation and reservoir level. This study proposed an optimal combination of methods in which the frequency components of decomposed inducing factors are considered for predicting landslide displacement. In preprocessing, the monitored surface displacements are decomposed into trend displacement and periodic displacement components via ensemble empirical mode decomposition (EEMD); the time series of the inducing factors (rainfall and reservoir level) were reconstructed and decomposed into high- and low-frequency time series via complete ensemble empirical mode decomposition (CEEMD) and t -test methods, among which two dominant inducing factors are identified by analyzing the longest common subsequence (LCSS) distance of the normalized data. In the prediction of the periodic displacement component, three optimal methods that use the support vector regression (SVR) model have been considered for comparison: the artificial bee colony (ABC) algorithm, the genetic algorithm (GA) and particle swarm optimization (PSO). The results demonstrate that the combination of CEEMD-LCSS reconstruction and ABC-SVR yields a robust model with remarkable prediction performance, which can increase the prediction accuracy of landslide displacements by 54% at most in the evaluation of RMSE. [ABSTRACT FROM AUTHOR]

Accurately predicting the surface displacement of the landslide is important and necessary. However, most of the existing research has ignored the frequency component of inducing factors and how it affects the landslide deformation. Therefore, a hybrid displacement prediction model based on time series theory and various intelligent algorithms was proposed in this paper to study the effect of frequency components. Firstly, the monitoring displacement of landslide from the Three Gorges Reservoir area (TGRA) was decomposed into the trend and periodic components by complete ensemble empirical mode decomposition (CEEMD). The trend component can be predicted by the least square method. Then, time series of inducing factors like rainfall and reservoir level was reconstructed into high frequency components and low frequency components with CEEMD and t-test, respectively. The dominant factors were selected by the method of dynamic time warping (DTW) from the frequency components and other common factors (e.g., current monthly rainfall). Finally, the ant colony optimization-based support vector machine regression (ACO-SVR) is utilized for prediction purposes in the TGRA. The results demonstrate that after considering the frequency components of landslide-induced factors, the accuracy of the displacement prediction model based on ACO-SVR is better than that of other models based on SVR and GA-SVR. [ABSTRACT FROM AUTHOR]

The soil parameters for large, complex landslides are typically derived from incomplete information based on a small sample set due to budgetary constraints. This informational incompleteness results in large statistical uncertainty in landslide reliability analyses. In this article, the bootstrap technique is proposed to quantify the statistical uncertainties associated with a small sample set, and a practice-oriented reliability analysis is performed. The results suggest that the obtained reliability indices are characterized by a long tail, in which the worst-case scenario has a local extreme value and a small population. The statistical uncertainties are quantified and characterized by a confidence interval at a specified confidence level. The confidence interval of the reliability index and identification of the worst-case scenario enable engineers to make more informed decisions. [ABSTRACT FROM AUTHOR]

Accurate and reliable displacement forecasting plays a key role in landslide early warning. However, due to the epistemic uncertainties associated with landslide systems, errors are unavoidable and sometimes significant in traditional methods of deterministic point forecasting. Transforming traditional point forecasting into probabilistic forecasting is essential for quantifying the associated uncertainties and improving the reliability of landslide displacement forecasting. This paper proposes a hybrid approach based on bootstrap, extreme learning machine (ELM), and artificial neural network (ANN) methods to quantify the associated uncertainties via probabilistic forecasting. The hybrid approach consists of two steps. First, a bootstrap-based ELM is applied to estimate the true regression mean of landslide displacement and the corresponding variance of model uncertainties. Second, an ANN is used to estimate the variance of noise. Reliable prediction intervals (PIs) can be computed by combining the true regression mean, variance of model uncertainty, and variance of noise. The performance of the proposed hybrid approach was validated using monitoring data from the Shuping landslide, Three Gorges Reservoir area, China. The obtained results suggest that the Bootstrap-ELM-ANN approach can be used to perform probabilistic forecasting in the medium term and long term and to quantify the uncertainties associated with landslide displacement forecasting for colluvial landslides with step-like deformation in the Three Gorges Reservoir area. [ABSTRACT FROM AUTHOR]

The physical model test of landslides is important for studying landslide structural damage, and parameter measurement is key in this process. To meet the measurement requirements for deep displacement in landslide physical models, an automatic flexible inclinometer probe with good coupling and large deformation capacity was designed. The flexible inclinometer probe consists of several gravity acceleration sensing units that are protected and positioned by silicon encapsulation, all the units are connected to a 485-comunication bus. By sensing the two-axis tilt angle, the direction and magnitude of the displacement for a measurement unit can be calculated, then the overall displacement is accumulated according to all units, integrated from bottom to top in turn. In the conversion from angle to displacement, two spline interpolation methods are introduced to correct and resample the data; one is to interpolate the displacement after conversion, and the other is to interpolate the angle before conversion; compared with the result read from checkered paper, the latter is proved to have a better effect, with an additional condition that the displacement curve move up half the length of the unit. The flexible inclinometer is verified with respect to its principle and arrangement by a laboratory physical model test, and the test results are highly consistent with the actual deformation of the landslide model. [ABSTRACT FROM AUTHOR]

This paper compares the performance of five popular machine learning methods, namely, particle swarm optimization–extreme learning machine (PSO–ELM), particle swarm optimization–kernel extreme learning machine (PSO–KELM), particle swarm optimization–support vector machine (PSO–SVM), particle swarm optimization–least squares support vector machine (PSO–LSSVM), and long short-term memory neural network (LSTM), in the prediction of reservoir landslide displacement. The Baishuihe, Shuping, and Baijiabao landslides in the Three Gorges reservoir area of China were used for case studies. Cumulative displacement was decomposed into trend displacement and periodic displacement by the Hodrick–Prescott filter. The double exponential smoothing method and the five machine learning methods were used to predict the trend and periodic displacement, respectively. The five machine learning methods are compared in three aspects: highest single prediction accuracy, mean prediction accuracy, and prediction stability. The results show that no method performed the best for all three aspects in the three landslide cases. LSTM and PSO–ELM achieved better single prediction accuracy, but worse mean prediction accuracy and stability. PSO–KELM, PSO–LSSVM, and PSO–SVM always yielded consistent predictions with slight variations. On the whole, PSO–KELM and PSO–LSSVM are recommended for their superior mean prediction accuracy and prediction stability. • The performances of machine learning methods depend on the selected evaluation index and reservoir landslide case. • Using single prediction accuracy for evaluating the superiority of machine learning methods may be unreliable. • PSO-KELM and PSO-LSSVM are recommended for their superior mean prediction accuracy and prediction stability. [ABSTRACT FROM AUTHOR]

Landslide displacement monitoring plays a fundamental role in the study of landslide evolution mechanisms, forecasting, risk assessment, prevention, and control. To fill the deficiencies of traditional instrumentation for measuring landslide displacement distributed along lateral direction, a landslide displacement measurement method based on deformation-coupled pipeline trajectory measurement is proposed, and a pipeline trajectory inertial measurement instrument is developed. The developed instrument, primarily comprised of a single shaft gyro, two axis accelerometers, and an external roller encoder, is designed as an axial half strapdown-radial half platform structure combined with a mechanical gravity platform. This structure avoids the singularity of pitch angle and roll angle and can expediently calculate a pipeline trajectory with an Eulerian transformation when obtaining several basic physical variables, e.g., the axial linear velocity, pitch angle, roll angle, and azimuth angle. Additionally, the pipeline trajectory, measured at different times, possesses the ability to reflect the displacement evolution feature of landslides. The results of prototype simulation tests imply a single measurement accuracy of a 12 cm/100 m span and a singly periodic multiple (more than five times) measurement accuracy of a 3 cm/100 m span, which meets medium-precision displacement measurement requirements for a landslide. Additionally, the finished instrument has been successfully applied to the deformation monitoring of the Majiagou I# landslide, which further verifies its feasibility and offers a reference for similar landslides. [ABSTRACT FROM AUTHOR]

A laboratory model test is an effective method for studying landslide risk mitigation. In this study, thermal infrared (TIR) imagery, a modern no-contact technique, was introduced and integrated with terrestrial laser scanning (TLS) and particle tracking velocimetry (PTV) to characterize the failure of a landslide model. The characteristics of the failure initiation, motion, and region of interest, including landslide volume, deformation, velocity, surface temperature changes, and anomalies, were detected using the integrated monitoring system. The laboratory test results indicate that the integrated monitoring system is expected to be useful for characterizing the failure of landslide models. The preliminary results of this study suggest that a change in the relative TIR signal (ΔTIR) can be a useful index for landslide detection, and a decrease in the average value of the temperature change ( Δ T I R ¯ ) can be selected as a precursor to landslide failure. [ABSTRACT FROM AUTHOR]