Search

• SPIDER beam non-uniformity and divergence not compliant yet with ITER requirements. • Additional diagnostics, e.g. fixed and insertable langmuir probes, RFEA. • Purpose: assess overall vertical and local beam non uniformities and beam divergence. • Method: improve spatial resolution, with more profiles and other plasma parameters. Each ITER Neutral Beam Injector (NBI) will provide 16.5 MW hydrogen/deuterium particles, electrostatically accelerating negative ions to 1 MeV. The challenging ITER NBI requirements have never been simultaneously attained and are expected to be demonstrated at the ITER Neutral Beam Test Facility (NBTF), at Consorzio RFX (Italy). NBTF includes the MITICA experiment, full-scale NBI prototype with 1 MeV particle energy, and SPIDER, with 100 keV particle energy, devoted to test and optimise the full-scale ion source. The four years of SPIDER operation demonstrated beam acceleration with high current density, but also highlighted that the non-uniformity and divergence of the beam are too large to comply with the ITER requirements, and that the current density is still lower; moreover, these findings can be traced back to non-homogeneity of the source plasma, where negative ions are produced. SPIDER then entered a shutdown dedicated to the improvement of the various plants and of the diagnostic system. The proposed additional diagnostic systems are integrated with the existing ones and mainly aim at increasing the spatial resolution of the plasma measurements, at investigating profiles in other directions and at measuring other parameters. In parallel, most of the already existing diagnostics will be refurbished or improved. [Display omitted] [ABSTRACT FROM AUTHOR]

We present the development and first use of a set of movable electrostatic probes on the full-scale ITER heating neutral beam prototype negative-ion source SPIDER. The probes access the ion source plasma from the multi-aperture accelerator aiming at the study of the plasma formation and expansion from the RF drivers through the transverse magnetic filter. The magnetic filter separates the relatively high electron-temperature region for plasma formation and hydrogen dissociation form the negative-ion extraction region in which low electron-temperature is required to avoid negative-ion destruction, but also causes non-uniformities and drifts in the large plasma discharge which will be studied by this setup. The set of electrostatic probes encompasses eight RF-compensated Langmuir probes, one double probe, one Mach probe for the assessment of plasma drift velocities, and two gridded retarding field energy analyzers to measure the positive-ion energy distribution function. Electric aspects as well as mechanical constraints given by the large in-vacuum movable structure, and thermal requirements of these relatively heat-flux components made the design challenging. Prototyping and commissioning of the measurement system is discussed offering examples of measured characteristics with the various probes. [ABSTRACT FROM AUTHOR]