Search

A one-dimensional steady-state model for stimulated Raman backscatter (SRS) and stimulated Brillouin backscatter (SBS) processes in laser-irradiated plasmas is presented. Based on a novel “predictor-corrector” method, the model is capable to deal with broadband scattered light and inhomogeneous plasmas, exhibiting robustness and high efficiency. Influences of the electron density and temperature on the linear gains of both SRS and SBS are investigated, which indicates that the SRS gain is more sensitive to the electron density and temperature than that of the SBS. For the low-density case, the SBS dominates the scattering process, while the SRS exhibits much higher reflectivity in the high-density case. The nonlinear saturation mechanisms and competition between SRS and SBS are included in our model by a phenomenological method. The typical anti-correlation between SRS and SBS versus electron density is reproduced in the model. Calculations of the reflectivities are qualitatively in agreement with the typical results of experiments and simulations.

A new scheme is proposed to enhance the conversion efficiency (CE) of soft x-rays (0.1–1.5 keV) generated by irradiating a double-gold-foil target using double laser pulses to collide gold plasmas. A detailed analysis of the hydrodynamic evolution of the colliding plasmas is performed by using one-dimensional radiation hydrodynamic simulations. The results show that the total soft x-ray CE can be enhanced up to 71.5% by setting the foil thickness as d1 = 0.3 μm, and this is 14.5% higher than that for a single laser irradiating a single-gold-foil target. Most of the enhanced soft x-ray CEs are generated from a stagnation layer formed by plasma collisions. Such a scheme is simple and practical, which is beneficial for their applications in astrophysical opacity calculations, inertial confinement fusion, and hydrodynamic instability analyses.

A new scheme is proposed to improve the electron beam quality of ionization-induced injection by tailoring gas profile in laser wakefield acceleration. Two-dimensional particle-in-cell simulations show that the ionization-induced injection mainly occurs in high-density stage and automatically truncates in low-density stage due to the decrease of wakefield potential difference. The beam loading can be compensated by the elongated beam resulting from the density transition stage. The beam quality can be improved by shorter injection distance and beam loading effect. A quasi-monoenergetic electron beam with a central energy of 258 MeV and an energy spread of 5.1% is obtained under certain laser-plasma conditions.

Collision of intermediate-energy heavy ions is an important way to investigate the state of high-density nuclear matter and formation of quark gluon plasmas. In this paper, we demonstrate from two-dimensional particle-in-cell simulations that hundreds-GeV Au79+ ions can be generated by ultrashort ∼1022–24 W cm−2 lasers interacting with high-Z grain doped gas. Under extremely intense laser field, strong γ-ray radiation has resulted in massive laser energy loss, and the invoked radiation reaction trapping of electrons weakens the heavy ion acceleration. However, due to hole-boring acceleration and multi-body expansion acceleration of high-Z grains, the energy conversion efficiency from laser to heavy ions is still up to 32%. Our results might provide an effective routine to carry out the experimental explorations of heavy-ion collisions by using hundreds-petawatt laser facilities.

Tunable X-ray sources from a laser-driven wakefield have wide applications. However, due to the difficulty of electron dynamics control, currently the tunability of laser wakefield–based X-ray sources is still difficult. By using three-dimensional particle-in-cell simulations, we propose a scheme to realize controllable electron dynamics and X-ray radiation. In the scheme, a long wavelength drive pulse excites a plasma wake and an off-axis laser pulse with a short wavelength co-propagates with the drive pulse and ionizes the K-shell electrons of the background high-Z gas. The electrons can be injected in the wakefield with controllable transverse positions and residual momenta. These injected electrons experience controllable oscillations in the wake, leading to tunable radiations both in intensity and polarization.

Electron-positron plasma has attracted much attention recently due to their unique properties. In this paper, we study the acceleration of electron-positron plasma in a cone by using PIC method. The electrons and positrons will be scattered by transverse ponderomotive force during the interaction between laser and electron-positron plasma. A new scheme is proposed to obtain high-energy dense collimated electron-positron plasma by a hollow gold cone. Transverse scattered electrons and positrons are pinched in the gold cone. Both electrons and positrons can be accelerated by ponderomotive force continuously and a dense collimated electron-positron plasma is produced. The energy of electrons and positrons obtained in the cone is much higher than the upper limit of electron energy obtained by ponderomotive force acceleration. The high quality electron and positron beam has great potential value in further research.

Multiple lasers interacting with a deuterated (D) pitcher-catcher target and neutron generation are investigated using two-dimensional hybrid particle-in-cell and Monte Carlo simulations. It is found that when multiple laser pulses are focused on the front surface of the pitcher layer, D+ ion acceleration by target normal sheath acceleration (TNSA) is enhanced by the interfering overlapped light fields and the resulting periodic target-surface structure. With three laser pulses each of 4.5×1019 W/cm2 intensity, 33 fs duration and ~160 mJ energy, focusing at suitable angles on the pitcher layer, one can obtain 15 MeV D+ ions and ~25% laser-to-D+ ions energy conversion efficiency. As the resulting high-energy-density D+ ions bombard the catcher layer, D-D fusion reactions are triggered. About 3.6×107 neutrons can be produced, with the maximum neutron production rate as high as 3.1×1036 m-3s-1, almost an order of magnitude higher than that from a single laser of the same total energy.

By using three-dimensional particle-in-cell simulations, we demonstrate that an energetic ring-shaped ion beam can be generated by an ultra-intense circularly polarized Laguerre–Gaussian laser pulse interacting with micro-structure targets. The electron and ion dynamics of three different targets including a sleeve–wire target, wire target, and common planar target are investigated. It is found that an optimized sleeve–wire target can provide a remarkable increase in the maximum ion energy and laser-to-ion energy conversion efficiency. The reason can be attributed to the matched transverse profiles between the electric-field distribution of Laguerre–Gaussian laser and sleeve–wire structure, resulting in efficient laser-target energy coupling. In fact, using a laser pulse of intensity 2.74 × 1 0 20 W/cm2, duration 66.7 fs, and energy ∼1 J, one can obtain ∼35 MeV protons, ∼5.8 MeV/u carbon ions, and ∼15% laser-to-ion energy conversion.

By using three-dimensional particle-in-cell simulations, externally injected electron beam acceleration and radiation in donut-like wake fields driven by a Laguerre–Gaussian pulse are investigated. Studies show that in the acceleration process the total charge and azimuthal momenta of electrons can be stably maintained at a distance of a few hundreds of micrometers. Electrons experience low-frequency spiral rotation and high-frequency betatron oscillation, which leads to a synchrotron-like radiation. The radiation spectrum is mainly determined by the betatron motion of electrons. The far field distribution of radiation intensity shows axial symmetry due to the uniform transverse injection and spiral rotation of electrons. Our studies suggest a new way to simultaneously generate hollow electron beam and radiation source from a compact laser plasma accelerator.

Relativistically intense laser solid target interaction has been proved to be a promising way to generate high-order harmonics, which can be used to diagnose ultrafast phenomena. However, their emission direction and spectra still lack tunability. Based upon two-dimensional particle-in-cell simulations, we show that directional enhancement of selected high-order-harmonics can be realized using blazed grating targets. Such targets can select harmonics with frequencies being integer times of the grating frequency. Meanwhile, the radiation intensity and emission area of the harmonics are increased. The emission direction is controlled by tailoring the local blazed structure. Theoretical and electron dynamics analysis for harmonics generation, selection and directional enhancement from the interaction between multi-cycle laser and grating target are carried out. These studies will benefit the generation and application of laser plasma-based high order harmonics.

Ionization-induced electron injection in a chirped laser pulse driven wakefield acceleration is investigated through particle-in-cell simulations. We find that negative (positive) chirp can longitudinally stretch (compress) laser pulse, and the wakefield amplitude can be enhanced regardless of the chirp sign. On the other hand, the rapid compression of a positively chirped pulse leads to the decrease of the wakefield potential difference, which breaks the ionization injection condition and consequent injection truncation occurs. The effective injection only lasts for a few hundred micrometers and the detailed injection length is determined by the chirp parameter. As a result, a highly tunable quasi-monoenergetic electron beam with narrow energy spread, hundreds of MeV central energy and tens of pC charge can be stably produced by this scheme.

We propose a compact scheme for high-density and high-energy positron generation. In the scheme, the generation, compression and acceleration of positrons are encompassed in a plasma channel irradiated by an ultra intense laser. In about 20 μm, positrons are accelerated with their energy beyond 20 GeV, and are compressed with a maximal density of 4.1n c . The obtained positron beam with a wave-like density profile is accelerated via the direct laser acceleration.

A scheme for generating high-flux positrons by two counter-propagating laser pulses colliding in near-critical-density plasmas is proposed, which might be realized with current laser facilities. Positrons of number 2.79 × 105 and with a maximum density of 9.63 × 1024 m−3 can be generated for a laser with an intensity of 1022 W cm−2. This is attributed to the increase in the cross sections for photon radiation and positron generation in the colliding scheme. In order to improve the positron generation, the relevant parameters are discussed in detail. This scheme will facilitate the observation of the Breit-Wheeler positrons in the laboratory.

We show that a ring-shaped hollow electron beam can be injected and accelerated by using a Laguerre-Gaussian laser pulse and ionization-induced injection in a laser wakefield accelerator. The acceleration and evolution of such a hollow, relativistic electron beam are investigated through three-dimensional particle-in-cell simulations. We find that both the ring size and the beam thickness oscillate during the acceleration. The beam azimuthal shape is angularly dependent and evolves during the acceleration. The beam ellipticity changes resulting from the electron angular momenta obtained from the drive laser pulse and the focusing forces from the wakefield. The dependence of beam ring radius on the laser-plasma parameters (e.g., laser intensity, focal size, and plasma density) is studied. Such a hollow electron beam may have potential applications for accelerating and collimating positively charged particles.

The influence of laser temporal contrast on high-order harmonic generation from intense laser interactions with solid-density plasma surfaces is experimentally studied. A switchable plasma mirror system is set up to improve the contrast by two orders of magnitude at 10 ps prior to the main peak. By using the plasma mirror and tuning the prepulse, the dependence of high-order harmonic generation on laser contrast is investigated. Harmonics up to the 21st order via the mechanism of coherent wake emission are observed only when the targets are irradiated by high contrast laser pulses by applying the plasma mirror.

By using a two-dimensional particle-in-cell simulation, we demonstrate a scheme for high-energy-density electron beam generation by irradiating an ultra intense laser pulse onto an aluminum (Al) target. With the laser having a peak intensity of 4 × 1023 W cm−2, a high quality electron beam with a maximum density of 117nc and a kinetic energy density up to 8.79 × 1018 J m−3 is generated. The temperature of the electron beam can be 416 MeV, and the beam divergence is only 7.25°. As the laser peak intensity increases (e.g., 1024 W cm−2), both the beam energy density (3.56 × 1019 J m−3) and the temperature (545 MeV) are increased, and the beam collimation is well controlled. The maximum density of the electron beam can even reach 180nc. Such beams should have potential applications in the areas of antiparticle generation, laboratory astrophysics, etc.

High-energy-density electron–positron pairs play an increasingly important role in many potential applications. Here, we propose a scheme for enhanced positron production by an ultra intense laser irradiating a gas-Al compound target via the multi-photon Breit–Wheeler (BW) process. The laser pulse first ionizes the gas and interacts with a near-critical-density plasma, forming an electron bubble behind the laser pulse. A great deal of electrons are trapped and accelerated in the bubble, while the laser front hole-bores the Al target and deforms its front surface. A part of the laser wave is thus reflected by the inner curved target surface and collides with the accelerated electron bunch. Finally, a large number of γ photons are emitted in the forward direction via the Compton back-scattering process and the BW process is initiated. Dense electron–positron pairs are produced with a maximum density of m−3. Simulation results show that the positron generation is greatly enhanced in the compound target, where the positron yield is two orders of magnitude greater than that in only the solid slab case. The influences of the laser intensity, gas density and length on the positron beam quality are also discussed, which demonstrates the feasibility of the scheme in practice.

The dynamics of electrons forming the boundary layer of a highly nonlinear laser wakefield driven in the so called bubble or blowout regime is investigated using particle-in-cell simulations. It is shown that when the driver pulse intensity increases or the focal spot size decreases, a significant amount of electrons initially pushed by the laser pulse can detach from the bubble structure at its tail, middle, or front and form particular classes of waves locally with high densities, referred to as the tail wave, lateral wave, and bow wave. The tail wave and bow wave correspond to real electron trajectories, while the lateral wave does not. The detached electrons can be ejected transversely, containing considerable energy, and reducing the efficiency of the laser wakefield accelerator. Some of the transversely emitted electrons may obtain MeV level energy. These electrons can be used for wake evolution diagnosis and producing high frequency radiation.

We study a laser wakefield acceleration driven by mid-infrared (mid-IR) laser pulses through two-dimensional particle-in-cell simulations. Since a mid-IR laser pulse can deliver a larger ponderomotive force as compared with the usual 0.8 μm wavelength laser pulse, it is found that electron self-injection into the wake wave occurs at an earlier time, the plasma density threshold for injection becomes lower, and the electron beam charge is substantially enhanced. Meanwhile, our study also shows that quasimonoenergetic electron beams with a narrow energy-spread can be generated by using mid-IR laser pulses. Such a mid-IR laser pulse can provide a feasible method for obtaining a high quality and high charge electron beam. Therefore, the current efforts on constructing mid-IR terawatt laser systems can greatly benefit the laser wakefield acceleration research.

The acceleration of electron beams with multiple transverse structures in wakefields driven by Laguerre-Gaussian pulses has been studied through three-dimensional (3D) particle-in-cell simulations. Under different laser-plasma conditions, the wakefield shows different transverse structures. In general cases, the wakefield shows a donut-like structure and it accelerates the ring-shaped hollow electron beam. When a lower plasma density or a smaller laser spot size is used, besides the donut-like wakefield, a central bell-like wakefield can also be excited. The wake sets in the center of the donut-like wake. In this case, both a central on-axis electron beam and a ring-shaped electron beam are simultaneously accelerated. Further, reducing the plasma density or laser spot size leads to an on-axis electron beam acceleration only. The research is beneficial for some potential applications requiring special pulse beam structures, such as positron acceleration and collimation.

By using two-dimensional particle-in-cell simulations, we demonstrate high-flux dense positrons generation by irradiating an ultra-intense laser pulse onto a tapered hollow target. By using a laser with an intensity of 4 × 1023 W/cm2, it is shown that the Breit-Wheeler process dominates the positron production during the laser-target interaction and a positron beam with a total number >1015 is obtained, which is increased by five orders of magnitude than in the previous work at the same laser intensity. Due to the focusing effect of the transverse electric fields formed in the hollow cone wall, the divergence angle of the positron beam effectively decreases to ∼15° with an effective temperature of ∼674 MeV. When the laser intensity is doubled, both the positron flux (>1016) and temperature (963 MeV) increase, while the divergence angle gets smaller (∼13°). The obtained high-flux low-divergence positron beam may have diverse applications in science, medicine, and engineering.

A scheme for enhancing the electron injection charge in a laser-driven bubble acceleration is proposed. In this scheme, a thin foil target is placed in front of a gas target. Upon interaction with an ultra-intense laser pulse, the foil emits electrons with large longitudinal momenta, allowing them to be trapped into the transmitted shaped laser-excited bubble in the gaseous plasma target. Two-dimensional particle-in-cell simulation is used to demonstrate this scheme, and an electron beam with a total electron number of 4.21×108 μm−1 can be produced, which is twice the number of electrons produced without the foil. Such scheme may be widely used for applications that require high electron yields such as positron and gamma ray generation from relativistic electron beams interacting with solid targets.

By using two-dimensional particle-in-cell simulations, we propose a scheme for strong coupling of a petawatt laser with an opening gold cone filled with near-critical-density plasmas. When relevant parameters are properly chosen, most laser energy can be fully deposited inside the cone with only 10% leaving the tip opening. Due to the asymmetric ponderomotive acceleration by the strongly decayed laser pulse, high-energy-density electrons with net laser energy gain are accumulated inside the cone, which then stream out of the tip opening continuously, like a jet. The jet electrons are fully relativistic, with speeds around 0.98−0.998 c and densities at 1020/cm3 level. The jet can keep for a long time over 200 fs, which may have diverse applications in practice.

Laser shaping of a relativistic circularly polarized laser pulse in ultra-intense laser thin-foil interaction is investigated by theoretical analysis and particle-in-cell simulations. It is found that the plasma foil as a nonlinear optical shutter has an obvious cut-out effect on the laser temporal and spatial profiles. Two-dimensional particle-in-cell simulations show that the high intensity part of a Gaussian laser pulse can be well extracted from the whole pulse. The transmitted pulse with longitudinal steep rise front and transverse super-Gaussian profile is thus obtained which would be beneficial for the radiation pressure acceleration regime. The Rayleigh-Taylor-like instability is observed in the simulations, which destroys the foil and results in the cut-out effect of the pulse in the rise front of a circularly polarized laser.