Search

A new signal processing algorithm tailored for in-situ applications combines multivariate analysis and hmable diode laser absorption spectroscopy. The principle and the application to the spectra separation of tetrafluoromethane and its interferants is demonstrated.

A laser-based hydrogen (H2) sensor using wavelength modulation spectroscopy (WMS) was developed for the contactless measurement of molecular hydrogen. The sensor uses a distributed feedback (DFB) laser to target the H2 quadrupole absorption line at 2121.8 nm. The H2 absorption line exhibited weak collisional broadening and strong collisional narrowing effects. Both effects were investigated by comparing measurements of the absorption linewidth with detailed models using different line profiles including collisional narrowing effects. The collisional broadening and narrowing parameters were determined for pure hydrogen as well as for hydrogen in nitrogen and air. The performance of the sensor was evaluated and the sensor applicability for H2 measurement in a range of 0&ndash, 10 %v of H2 was demonstrated. A precision of 0.02 %v was achieved with 1 m of absorption pathlength (0.02 %v∙m) and 1 s of integration time. For the optimum averaging time of 20 s, precision of 0.005 %v∙m was achieved. A good linear relationship between H2 concentration and sensor response was observed. A simple and robust transmitter&ndash, receiver configuration of the sensor allows in situ installation in harsh industrial environments.

Recent developments in quantum cascade lasers have enabled the development of new sensors for in-situ applications that have so far only been possible with extractive systems. In this work, a sensor is presented using a unique Wavelength Modulation Spectroscopy approach to measure tetrafluoromethane, a strong greenhouse gas. The sensor was characterized in a laboratory environment indicating a long-term detection limit of 20 ppb·m and a short-term value of well below 10 ppb·m. To demonstrate the feasibility of the sensor in a real-world environment, it was installed at an Alcoa aluminum smelter. A co-located Fourier Transform Infrared Spectrometer allowed direct comparison measurements of both systems. General agreement between the two methods was observed, leading to the conclusion that the developed in-situ quantum cascade laser based sensor has the potential to continuously measure tetrafluoromethane at aluminum smelters.