Search

Acoustic wave fields both within the active electrode area of a solidly mounted 1.8 GHz bulk acoustic wave resonator, and around it in the surrounding region, are measured using a heterodyne laser interferometer. Plate-wave dispersion diagrams for both regions are extracted from the measurement data. The experimental dispersion data reveal the cutoff frequencies of the acoustic vibration modes in the region surrounding the resonator, and, therefore, the energy trapping range of the resonator can readily be determined. The measured dispersion properties of the surrounding region, together with the abruptly diminishing amplitude of the dispersion curves in the resonator, signal the onset of acoustic leakage from the resonator. This information is important for verifying and further developing the simulation tools used for the design of the resonators. Experimental wave field images, dispersion diagrams for both regions, and the threshold for energy leakage are discussed. [ABSTRACT FROM AUTHOR]

We describe a scanning heterodyne interferometer for imaging surface vibrations with a wide frequency range, with current electronics, up to 6 GHz. The heterodyne operation facilitates measurement of absolute amplitude and phase of the surface vibration without calibration. Currently, the setup allows detection of vibration amplitudes down to ∼1 pm with a lateral resolution of <1 μm. The interferometer is designed to accommodate the different sample types, e.g., surface and bulk acoustic wave devices and micromechanical resonators. The absolute-amplitude and phase information allows for a thorough characterization of surface vibrations in such components and provides direct information of the vibration fields not obtainable via electrical measurements. [ABSTRACT FROM AUTHOR]

Acoustic wave fields in a thin-film bulk acoustic wave resonator are studied using a heterodyne laser interferometer. The measurement area is extended outside the active electrode region of the resonator, so that wave fields in both the active and surrounding regions can be characterized. At frequencies at which the region surrounding the resonator does not support laterally propagating acoustic waves, the analysis of the measurement data shows exponentially decaying amplitude fields outside the active resonator area, as suggested by theory. The magnitude of the imaginary wave vectors is determined by fitting an exponential function to the measured amplitude data, and thereby the experimentally determined dispersion diagram is extended into the region of imaginary wave numbers. [ABSTRACT FROM PUBLISHER]

A heterodyne laser interferometer is used for a detailed study of the acoustic wave fields excited in a 932-MHz solidly mounted ZnO thin-film BAW resonator. The sample is manufactured on a glass substrate, which also allows direct measurement of the vibration fields from the bottom of the acoustic mirror. Vibration fields are measured both on top of the resonator and at the mirror-substrate interface in a frequency range of 350 to 1200 MHz. Plate wave dispersion diagrams are calculated from the experimental data in both cases and the transmission characteristics of the acoustic mirror are determined as a function of both frequency and lateral wave number. The experimental data are compared with 1-D and 2-D simulations to evaluate the validity of the modeling tools commonly used in mirror design. All the major features observed in the 1-D model are identified in the measured dispersion diagrams, and the mirror transmission characteristics predicted for the longitudinal waves, by both the 1-D and the 2-D models, match the measured values well. [ABSTRACT FROM AUTHOR]