Search

A laser ultrasonics (LU) based frequency domain synthetic aperture focusing technology (LUB-F-SAFT), which uses 2D equivalent velocity (SEV) and fuses multi-mode ultrasound, is developed to image the internal horizontal hole defects with a diameter of ∼ 1. 0 mm in bimetallic composites. Bulk waves non-destructively excited by a line-shaped laser are detected by a vibrometer away from the excitation. The results indicate that the LUB-F-SAFT with SEV can improve the imaging quality and locating capability, and the testing error is about 0. 02 mm. The improvement in the imaging quality using SEV for different ratios of the first layer thickness to defect-to-interface distances is discussed. In addition, a theoretical approach based on the directionality of the detected ultrasound is applied to determine a reasonable excitation-detection distance for better defect imaging. A LUB-F-SAFT imaging combining multi-mode waves is employed to improve the range of defect profiles. The results show that the range of the imaged defect profile becomes larger using the multi-mode fused LUB-F-SAFT imaging, which is an improvement of about 49.2% compared to the shear wave imaging result. • LUB-F-SAFT imaging with SEV is developed for bilayer media. • The SEV corrects distortion and position bias of defect. • A optimized excitation-detection distance for better defect imaging. • A multi-mode fused LUB-F-SAFT improve the profile of the defect. [ABSTRACT FROM AUTHOR]

The Synthetic Aperture Focusing Technique (SAFT) is employed in laser ultrasonic non-destructive testing to image defects. However, during the laser ultrasonic imaging process, the influence of multi-mode waves often introduces various artifacts in the imaging results. We investigated a multi-iteration frequency-domain SAFT (MIF-SAFT) algorithm to tackle this challenge. Initially, a single low-precision F-SAFT imaging result is performed to identify potential defect locations. Subsequently, a back-projection method is applied to determine defect positions and separates acoustic waves of different modes in the B-scan. After that, a multi-mode F-SAFT imaging is performed for evaluation, and the above process is repeated until the imaging outcome stabilizes. The result shows that artifacts are removed when the image remains unchanged after multiple iterations, and the imaging quality is effectively improved by MIF-SAFT. Furthermore, including directivity patterns of laser ultrasound also enhances defect imaging capabilities within MIF-SAFT. Additionally, we examined the MIF-SAFT's capacity to detect multiple defects, which can image them simultaneously. • Multi-iteration in F-SAFT for artifact removal. • Different ultrasonic signals are separated by using the algorithm. • Directivity patterns are performed to enhance the imaging result. • Applied for multiple defects imaging simultaneously. [ABSTRACT FROM AUTHOR]