Search

We assembled a testbed to study coupling of starlight through atmospheric turbulence via astronomical telescopes into astrophotonic devices. The setup allows for varying the turbulence strength and investigating the effects of different levels of adaptive optics correction on the efficiency of integrated optics. In addition to recording optical powers and wavefront errors, focal plane images are captured from which spots sizes and Strehl ratios are also measured. Novel astrophotonic components proposed as alternatives to conventional optical instruments can therefore be qualified in terms of coupling efficiency and throughput on the testbed before they are tested on the sky.

In long-baseline interferometry, over the last few decades integrated optics beam combiners have become at- tractive technological solutions for new-generation instruments operating at infrared wavelengths. We have investigated different architectures of discrete beam combiners (DBC), which are 2D lattice arrangement of channel waveguides that can be fabricated by exploiting the 3D capability of the ultrafast laser inscription (ULI) fabrication techniques. Here, we present the first interferometric on-sky results of an integrated optics beam combiner based on a coherent pupil remapper and 4 input/23 output zig-zag based DBC, both written monolith- ically in a single borosilicate glass. We show the preliminary results of visibility amplitudes and closure phases obtained from the Vega star by using the previously calibrated transfer matrix of the device.

We report the ultrafast laser inscription (ULI) and characterization of 3 dB directional achromatic couplers for K-band between 2 and 2.4 μm. The couplers were fabricated in commercial Infrasil glass using 1030 nm femtosecond laser pulses. Straight waveguides inscribed using optimal fabrication parameters exhibit an average propagation loss of ∼1.21 dB over full range of K-band with a single-mode behavior for a length of 17 mm. Directional couplers with different interaction lengths and waveguide widths were fabricated and characterized. We demonstrate that 3 dB achromatic directional couplers for K-band can be fabricated using ULI. These results show that ULI can fabricate highquality couplers for future applications in astronomical interferometry. Our eventual aim is to develop a two-telescope K-band integrated optical beam combiner to replace JouFLU at CHARA.

Starlight corrupted by atmospheric turbulence cannot couple efficiently into astronomical instruments based on integrated optics as they require light of high spatial coherence to couple into their single-mode waveguides. Low-order adaptive optics in combination with photonic lanterns offer a practical approach to achieve efficient coupling into multiplexed astrophotonic devices. We investigate, aided by simulations and an experimental testbed, the trade-off between the degrees of freedom of the adaptive optics system and those of the input waveguide of an integrated optic component leading to a cost-effective hybrid system that achieves a signal-to-noise ratio higher than a standalone device fed by a single-mode fiber., 12 pages, 10 figures

Space offers virtually unlimited free-fall in gravity. Bose-Einstein condensation (BEC) enables ineffable low kinetic energies corresponding to pico- or even femtokelvins. The combination of both features makes atom interferometers with unprecedented sensitivity for inertial forces possible and opens a new era for quantum gas experiments. On January 23, 2017, we created Bose-Einstein condensates in space on the sounding rocket mission MAIUS-1 and conducted 110 experiments central to matter-wave interferometry. In particular, we have explored laser cooling and trapping in the presence of large accelerations as experienced during launch, and have studied the evolution, manipulation and interferometry employing Bragg scattering of BECs during the six-minute space flight. In this letter, we focus on the phase transition and the collective dynamics of BECs, whose impact is magnified by the extended free-fall time. Our experiments demonstrate a high reproducibility of the manipulation of BECs on the atom chip reflecting the exquisite control features and the robustness of our experiment. These properties are crucial to novel protocols for creating quantum matter with designed collective excitations at the lowest kinetic energy scales close to femtokelvins., 6 pages, 4 figures

We present the fabrication and characterization of 3 dB asymmetric directional couplers for the astronomical K-band at wavelengths between 2.0 and 2.4 µm. The couplers were fabricated in commercial Infrasil silica glass using an ultrafast laser operating at 1030 nm. After optimizing the fabrication parameters, the insertion losses of straight single-mode waveguides were measured to be ∼ 1.2 ± 0.5 d B across the full K-band. We investigate the development of asymmetric 3 dB directional couplers by varying the coupler interaction lengths and by varying the width of one of the waveguide cores to detune the propagation constants of the coupled modes. In this manner, we demonstrate that ultrafast laser inscription is capable of fabricating asymmetric 3 dB directional couplers for future applications in K-band stellar interferometry. Finally, we demonstrate that our couplers exhibit an interferometric fringe contrast of > 90 % . This technology paves the path for the development of a two-telescope K-band integrated optic beam combiner for interferometry to replace the existing beam combiner (MONA) in Jouvence of the Fiber Linked Unit for Recombination (JouFLU) at the Center for High Angular Resolution Astronomy (CHARA) telescope array.

We present the first on-sky results of a four-telescope integrated optics discrete beam combiner (DBC) tested at the 4.2 m William Herschel Telescope. The device consists of a four-input pupil remapper followed by a DBC and a 23-output reformatter. The whole device was written monolithically in a single alumino-borosilicate substrate using ultrafast laser inscription. The device was operated at astronomical H-band (1.6 µm), and a deformable mirror along with a microlens array was used to inject stellar photons into the device. We report the measured visibility amplitudes and closure phases obtained on Vega and Altair that are retrieved using the calibrated transfer matrix of the device. While the coherence function can be reconstructed, the on-sky results show significant dispersion from the expected values. Based on the analysis of comparable simulations, we find that such dispersion is largely caused by the limited signal-to-noise ratio of our observations. This constitutes a first step toward an improved validation of the DBC as a possible beam combination scheme for long-baseline interferometry.

In ground-based astronomy, starlight distorted by the atmosphere couples poorly into single-mode waveguides but a correction by adaptive optics, even if only partial, can boost coupling into the few-mode regime allowing the use of photonic lanterns to convert into multiple single-mode beams. Corrected wavefronts result in focal patterns that couple mostly with the circularly symmetric waveguide modes. A mode-selective photonic lantern is hence proposed to convert the multimode light into a subset of the single-mode waveguides of the standard photonic lantern, thereby reducing the required number of outputs. We ran simulations to show that only two out of the six waveguides of a 1x6 photonic lantern carry >95% of the coupled light to the outputs at $D/r_0 < 10$ if the wavefront is partially corrected and the photonic lantern is made mode-selective., 6 pages, 5 figures, accepted for publication in Applied Optics

We report on the MARS2013 mission, a 4-week Mars analog field test in the northern Sahara. Nineteen experiments were conducted by a field crew in Morocco under simulated martian surface exploration conditions, supervised by a Mission Support Center in Innsbruck, Austria. A Remote Science Support team analyzed field data in near real time, providing planning input for the management of a complex system of field assets; two advanced space suit simulators, four robotic vehicles, an emergency shelter, and a stationary sensor platform in a realistic work flow were coordinated by a Flight Control Team. A dedicated flight planning group, external control centers for rover tele-operations, and a biomedical monitoring team supported the field operations. A 10 min satellite communication delay and other limitations pertinent to human planetary surface activities were introduced. The fields of research for the experiments were geology, human factors, astrobiology, robotics, tele-science, exploration, and operations research. This paper provides an overview of the geological context and environmental conditions of the test site and the mission architecture, in particular the communication infrastructure emulating the signal travel time between Earth and Mars. We report on the operational work flows and the experiments conducted, including a deployable shelter prototype for multiple-day extravehicular activities and contingency situations.

We have developed, assembled, and flight-proven a stable, compact, and autonomous extended cavity diode laser (ECDL) system designed for atomic physics experiments in space. To that end, two micro-integrated ECDLs at 766.7 nm were frequency stabilized during a sounding rocket flight by means of frequency modulation spectroscopy (FMS) of 39^K and offset locking techniques based on the beat note of the two ECDLs. The frequency stabilization as well as additional hard- and software to test hot redundancy mechanisms were implemented as part of a state-machine, which controlled the experiment completely autonomously throughout the entire flight mission., 10 pages, 7 figures

Autonomous laser frequency stabilization is a prerequisite for future space-borne atomic physics experiments. The KALEXUS experiment performed frequency stabilization of two 767 nm extended cavity diode lasers onboard the TEXUS 53 sounding rocket.

We apply local intermittency measure (LIM) analysis to 64 ms time resolved BATSE measurements of hard X-rays from several solar flares. LIM analysis yields information on the character of the processes giving rise to fluctuations in light curves, e.g. avalanche vs. cascade pictures. We present LIM scaleograms for several flares and summarise scaleogram morphological features. More detailed descriptions are given of the behaviour in the flare of 13 January 1992 (the well-known ‘Masuda flare’) and an interesting event on 22 November 1998. All flares display episodes of intermittency across a range of scales. LIM scaleogram features may be consistent with both ‘top-down’ and ‘bottom-up’ scenarios for the development of small-scale structure, sometimes within the same flare. Thus neither class of model captures the totality of the events in a flare.

We introduce the local intermittency measure (LIM) as a tool for the investigation of solar flare hard X-ray light curves. Constructed from wavelet amplitudes, the LIM allows us to investigate the extent to which rapid fluctuations reveal an underlying, scale-invariant process, and to identify those episodes during a flare which definitely represent ‘intermittent’ behaviour (e.g. involvement of new spatial structures). We carry out two sets of simple simulations intended to provide generic examples of ‘top-down’ and ‘bottom-up’ scenarios for the development of flares, and show how LIM may discriminate between them.

We present micro-integrated diode laser modules operating at wavelengths of 767 and 780 nm for cold quantum gas experiments on potassium and rubidium. The master-oscillator-power-amplifier concept provides both narrow linewidth emission and high optical output power. With a linewidth (10 μs) below 1 MHz and an output power of up to 3 W, these modules are specifically suited for quantum optics experiments and feature the robustness required for operation at a drop tower or on-board a sounding rocket. This technology development hence paves the way toward precision quantum optics experiments in space.