Search

Besides inferior conversion efficiency, the widespread application of thermoelectric materials currently faces the challenges of the rare and high cost of constituent elements, complex and time-consuming synthesis. Therefore, it is urgent to develop facile synthesized methods and high-performance thermoelectric materials consisting of elements with earth-abundance and low cost. Meeting above partial requirement, lead sulfide (PbS) recently was identified as a potential thermoelectric material to substitute current commercial PbTe. In this paper, a one-step high-pressure method was employed to facile and fast synthesis of PbS. Trace Cl doping tunes the carrier concentration of PbS effectively, which optimizes the electrical transport properties. Further PbSe alloying sharply reduces the thermal conductivity of PbS. Therefore, an enhanced zT ∼1.0 @ 700 K was obtained for PbS doped with 0.3 at% Cl and alloyed with 25 at% PbSe, which is comparable to the commercially applied PbTe. These results indicate that high-pressure combing with Cl-doping and PbSe-alloying provide a facile method and strategy to fabricate high-performance PbS-based thermoelectric materials. • Earth-abundant and low-cost thermoelectric compound PbS was facile and fast synthesized by one-step high pressure method. • Cl doping modulates the carrier concentration of PbS and thus optimizes its electrical properties at high temperature. • The chemical bond of PbS was weaken by PbSe alloying, which induces an enhanced Hall mobility near room temperature. • The thermal conductivity of PbS was suppressed sharply by PbSe alloying. • The enhanced zT max and zT avg achieve to 1.0 and 0.67 for PbS 0.747 Cl 0.003 Se 0.25 and PbS 0.497 Cl 0.003 Se 0.5, respectively [ABSTRACT FROM AUTHOR]