Search

Although crop-growth monitoring is important for agricultural managers, it has always been a difficult research topic. However, unmanned aerial vehicles (UAVs) equipped with RGB and hyperspectral cameras can now acquire high-resolution remote-sensing images, which facilitates and accelerates such monitoring. To explore the effect of monitoring a single crop-growth indicator and multiple indicators, this study combines six growth indicators (plant nitrogen content, above-ground biomass, plant water content, chlorophyll, leaf area index, and plant height) into the new comprehensive growth index (CGI). We investigate the performance of RGB imagery and hyperspectral data for monitoring crop growth based on multi-time estimation of the CGI. The CGI is estimated from the vegetation indices based on UAV hyperspectral data treated by linear, nonlinear, and multiple linear regression (MLR), partial least squares (PLSR), and random forest (RF). The results are as follows: (1) The RGB-imagery indices red reflectance (r), the excess-red index (EXR), the vegetation atmospherically resistant index (VARI), and the modified green-red vegetation index (MGRVI), as well as the spectral indices consisting of the linear combination index (LCI), the modified simple ratio index (MSR), the simple ratio vegetation index (SR), and the normalized difference vegetation index (NDVI), are more strongly correlated with the CGI than a single growth-monitoring indicator. (2) The CGI estimation model is constructed by comparing a single RGB-imagery index and a spectral index, and the optimal RGB-imagery index corresponding to each of the four growth stages in order is r, r, r, EXR; the optimal spectral index is LCI for all four growth stages. (3) The MLR, PLSR, and RF methods are used to estimate the CGI. The MLR method produces the best estimates. (4) Finally, the CGI is more accurately estimated using the UAV hyperspectral indices than using the RGB-image indices. [ABSTRACT FROM AUTHOR]

• A novel model (LabTNet) is proposed to estimate crop biochemical traits. • LabTNet jointly estimates multiple wheat traits by hyperspectral data. • LabTNet exhibits superior predictive performance than existing methods. • Grad-CAM analyzed hyperspectral attention regions of LabTNet. Accurate estimation of crop leaf and canopy biochemical traits, such as leaf dry matter content (Cm), leaf equivalent water thickness (Cw), leaf area index (LAI), dry leaf biomass (DLB), leaf total water content (LW), and fresh leaf biomass (FLB), is essential for monitoring crop growth accurately. The vegetation spectral feature technique combined with statistical regression methods is widely employed for remote sensing crop biochemical traits mapping. However, the crop canopy spectral reflectance is influenced by various crop biochemical traits and uncertainties in geometric changes of light and soil background effects. Consequently, the remote-sensing estimation of crop biochemical traits is limited. A potential solution involves training a deep learning model to understand the physical relationship between crop biochemical traits and canopy spectral reflectance based on a physical radiative transfer model (RTM). The primary focus of this study is to propose a winter-wheat leaf and canopy biochemical traits analysis and mapping method based on hyperspectral remote sensing, utilizing a deep learning network for leaf area index and leaf biochemical traits deep learning network (LabTNet). This study consists of four main tasks: (1) Field-based measurements of winter-wheat spectra and biochemical traits were conducted in two growing seasons. A PROSAIL RTM was also employed to generate a simulated dataset representing comprehensive and complex winter-wheat field conditions. (2) The LabTNet deep learning model was pre-trained using the simulated spectra dataset to acquire knowledge of the physical relationship between crop biochemical traits and canopy spectral reflectance derived from the RTM. Subsequently, the model was re-trained using the field-based spectra dataset from two growing seasons, employing a transfer learning technique. (3) An analysis was conducted to assess the performance of LabTNet against traditional statistical regression methods in estimating crop leaf and canopy biochemical traits. The study used the gradient-weighted class activation mapping (Grad-CAM) technique to analyze the attention regions of input spectra (454:8:950 nm, 960:10:1300 nm, 1450:10:1750 nm, 2000:10:2350 nm) by different convolutional neural network layers in LabTNet, aiming to enhance the interpretability of deep learning models. (4) Winter-wheat leaf and canopy biochemical traits (Cw, Cm, LAI, DLB, LW, and FLB) were mapped using the LabTNet deep learning model. Our research has the following conclusions: (1) Combining the RTM and deep learning techniques yields higher winter-wheat biochemical trait estimates than traditional statistical regression methods. (2) Different LabTNet deep learning model layers focus on distinct areas of canopy reflectance, corresponding to the sensitive regions for various winter-wheat biochemical traits. (3) LabTNet demonstrates similar winter-wheat leaf and canopy biochemical traits estimation performance using visible and near-infrared (VNIR) reflectance data and full-spectral (FS) range hyperspectral reflectance as inputs (Cw: R 2 = 0.603–0.653, RMSE = 0.0015–0.0015 cm; Cm: R 2 = 0.511–0.560, RMSE = 0.0006–0.0007 g/m2; LAI: R 2 = 0.773–0.793, RMSE = 0.65–0.66 m2/m2; LW: R 2 = 0.842–0.847, RMSE = 67.93–70.73 g/m2; DLB: R 2 = 0.747–0.762, RMSE = 21.10–21.89 g/m2; FLB: R 2 = 0.831–0.840, RMSE = 86.26–90.30 g/m2). The combined use of UAV hyperspectral remote sensing and the LabTNet model proves effective in providing high-performance winter-wheat leaf and canopy biochemical trait maps, offering valuable insights for agricultural management. [ABSTRACT FROM AUTHOR]

The accuracy of nitrogen (N) diagnosis is essential to improve N use efficiency. The standard critical N concentration (standard Nc) dilution curves, an expression of the dynamics of N uptake and dry matter accumulation in plants, are widely used to diagnose the N status of crops. Several standard Nc dilution curves were proposed and validated for several crops, based on experiments involving different N fertilizer treatments. However, standard Nc dilution curves are affected by crop water status, e.g., resulting from differences in irrigation management. This paper aimed at developing a N diagnostic model under the coupling effect of irrigation and fertilizer managements. For this purpose, Nc dilution curves were developed under different irrigation rates. Additionally, plant water content (PWC), leaf water content (LWC), leaf area index (LAI), equivalent water thickness (EWT), and leaf area duration (LAD) were introduced into the model, to construct a modified Nc (mNc) dilution curve. The mNc dilution curves were designed using the principle of hierarchical linear model (HLM), introducing aboveground dry biomass (AGB) as the first layer of information, whereas the second layer of information included the different agronomic variables (PWC, LWC, LAI, EWT, and LAD). The results showed that parameters " a " and " b" of the standard Nc dilution curves ranged from 5.17 to 6.52 and −0.69 to −0.38 respectively. Parameter " a " was easily affected by different management conditions. The performance of standard Nc dilution models obtained by the cross-validation method was worse than that of mNc dilution models. The Nc dilution curve based on 4 years of data was described by the negative power equation Nc = 5.05 × AGB–0.47, with R 2 and nRMSE of 0.63 and 0.21, respectively. The mNc dilution curve considers different treatments and was represented by the equation mNc = a×AGB− b , where a = 2.09 × PWC + 3.24, b = −0.02 × LAI + 0.51, with R 2 and nRMSE of 0.79 and 0.13, respectively. For winter wheat, C3 crop, there would be a few problems in using standard Nc dilution methods to guide field management, however, this study provides a reliable method for constructing mNc dilution curves under different water and N fertilizer management. Due to the significant differences in hereditary, CO2 fixation efficiency and N metabolism pathways for C3 and C4 crops, the construction of mNc dilution curve suitable for different N response mechanisms will be conducive to the sustainable N management in crop plants. [ABSTRACT FROM AUTHOR]

Leaf area index (LAI) and leaf chlorophyll content (LCC) are major considerations in management decisions, agricultural planning, and policy-making. When a radiative transfer model (RTM) was used to retrieve these biophysical variables from remote-sensing data, the ill-posed problem was unavoidable. In this study, we focused on the use of agronomic prior knowledge (APK), constructing the relationship between LAI and LCC, to restrict and mitigate the ill-posed inversion results. For this purpose, the inversion results obtained using the SAILH+PROSPECT (PROSAIL) canopy reflectance model alone (no agronomic prior knowledge, NAPK) and those linked with APK were compared. The results showed that LAI inversion had high accuracy. The validation results of the root mean square error (RMSE) between measured and estimated LAI were 0.74 and 0.69 for NAPK and APK, respectively. Compared with NAPK, APK improved LCC estimation; the corresponding RMSE values of NAPK and APK were 13.36 µg cm–2and 9.35 µg cm–2, respectively. Our analysis confirms the operational potential of PROSAIL model inversion for the retrieval of biophysical variables by integrating APK. [ABSTRACT FROM PUBLISHER]

Vertical heterogeneity of the biochemical characteristics of crop canopy is important in diagnosing and monitoring nutrition, disease, and crop yield via remote sensing. However, the research on vertical isomerism was not comprehensive. Experiments were carried out from the two levels of simulation and verification to analyze the applicability of this recently development model. Effects of winter wheat on spectrum were studied when input different structure parameters (e.g., leaf area index (LAI)) and physicochemical parameters (e.g., chlorophyll content ( C h l a + b ) and water content ( C w )) to the mSCOPE (Soil Canopy Observation, Photochemistry, and Energy fluxes) model. The maximum operating efficiency was 127.43, when the winter wheat was stratified into three layers. Meanwhile, the simulation results also proved that: the vertical profile of LAI had an influence on canopy reflectance in almost all bands; the vertical profile of C h l a + b mainly affected the reflectivity of visible region; the vertical profile of C w only affected the near-infrared reflectance. The verification results showed that the vegetation indexes (VIs) selected of different bands were strongly correlated with the parameters of the canopy. LAI, C h l a + b and C w affected VIs estimation related to LAI, C h l a + b and C w respectively. The Root Mean Square Error (RMSE) of the new-proposed N D V I g r e e n was the smallest, which was 0.05. Sensitivity analysis showed that the spectrum was more sensitive to changes in upper layer parameters, which verified the rationality of mSCOPE model in explaining the law that light penetration in vertical nonuniform canopy gradually decreases with the increase of layers. [ABSTRACT FROM AUTHOR]

Above-ground biomass (AGB) and the leaf area index (LAI) are important indicators for the assessment of crop growth, and are therefore important for agricultural management. Although improvements have been made in the monitoring of crop growth parameters using ground- and satellite-based sensors, the application of these technologies is limited by imaging difficulties, complex data processing, and low spatial resolution. Therefore, this study evaluated the use of hyperspectral indices, red-edge parameters, and their combination to estimate and map the distributions of AGB and LAI for various growth stages of winter wheat. A hyperspectral sensor mounted on an unmanned aerial vehicle was used to obtain vegetation indices and red-edge parameters, and stepwise regression (SWR) and partial least squares regression (PLSR) methods were used to accurately estimate the AGB and LAI based on these vegetation indices, red-edge parameters, and their combination. The results show that: (i) most of the studied vegetation indices and red-edge parameters are significantly highly correlated with AGB and LAI; (ii) overall, the correlations between vegetation indices and AGB and LAI, respectively, are stronger than those between red-edge parameters and AGB and LAI, respectively; (iii) Compared with the estimations using only vegetation indices or red-edge parameters, the estimation of AGB and LAI using a combination of vegetation indices and red-edge parameters is more accurate; and (iv) The estimations of AGB and LAI obtained using the PLSR method are superior to those obtained using the SWR method. Therefore, combining vegetation indices with red-edge parameters and using the PLSR method can improve the estimation of AGB and LAI. [ABSTRACT FROM AUTHOR]

Plant nitrogen (N) information has widely been estimated through empirical techniques using hyperspectral data. However, the physical model inversion approach on N spectral response has seldom developed and remains a challenge. In this study, an N-PROSAIL model based on the N-based PROSPECT model and the SAIL model canopy model was constructed and used for retrieving crop N status both at leaf and canopy scales. The results show that the third parameter (3rd-par) retrieving strategy (leaf area index (LAI) and leaf N density (LND) optimized where other parameters in the N-PROSAIL model are set at different values at each growth stage) exhibited the highest accuracy for LAI and LND estimation, which resulted in R2 and RMSE values of 0.80 and 0.69, and 0.46 and 21.18 µg·cm−2, respectively. It also showed good results with R2 and RMSE values of 0.75 and 0.38% for leaf N concentration (LNC) and 0.82 and 0.95 g·m−2 for canopy N density (CND), respectively. The N-PROSAIL model retrieving method performed better than the vegetation index regression model (LNC: RMSE = 0.48 − 0.64%; CND: RMSE = 1.26 − 1.78 g·m−2). This study indicates the potential of using the N-PROSAIL model for crop N diagnosis on leaf and canopy scales in wheat. [ABSTRACT FROM AUTHOR]

• Optimized multiple lookup tables (Multi-LUTs) for improving computing efficiency and estimation accuracy. • Multi-LUTs method based on the N-PROSAIL model for canopy nitrogen density estimation. • Canopy nitrogen density estimation from field and UAV hyperspectral data. Unmanned aerial vehicle (UAV) based hyperspectral images linked to a radiative transfer model can provide a promising approach for high throughput monitoring of plant nitrogen (N) status. In this study, multiple lookup tables (Multi-LUTs), each LUT corresponding to one growth stage, were constructed based on the N-PROSAIL model, a radiative transfer model, and LUT size was optimized for improving computing efficiency. The objective is to use the constructed Multi-LUTs for estimating canopy N density (CND) in winter wheat. Results suggest that Multi-LUTs of leaf area index, leaf N density and two spectral indices (MSR and MCARI/MTVI2) in winter wheat demonstrate good performance of CND estimation; and LUTs with the optimal size of 6000 rows can yield good accuracy. The R2 and nRMSE values of the regression relationship between estimated and measured CND were 0.83 and 0.23 from field hyperspectral data, and 0.69 and 0.27 from UAV based hyperspectral imagery during the 2014–2015 growing season. CND by Multi-LUTs method was also accurately estimated from field hyperspectral data during the 2013–2014 growing season, with R2 and nRMSE values of 0.74 and 0.26. The estimation accuracy of CND based UAV data was a slightly lower than based field data. The resultant thematic CND map accurately exhibits CND variability at varying spatial and temporal scales. Results from this study confirmed the potential of combining UAV based hyperspectral imagery and physical optics approach for estimating CND in winter wheat. [ABSTRACT FROM AUTHOR]