Search

The utilization of lignin in material fabrication has garnered significant attention despite its complex structure that greatly limits its applications. This study reports a green method for grading and modifying lignin to prepare stable hydrophobic coatings via the solvent/anti-solvent (ethanol/water) self-assembly method. First, the formic acid lignin particle (FLP) is prepared and the underlying mechanism is primarily ascribed to the hydrogen bonding, π–π interactions among aromatic groups within and between molecules, and hydrophobic interactions. The lignin nanoparticles were utilized to chelate with metal ions (iron) in order to obtain the stable hydrophobic coatings using the special nanostructures of FLP. This hydrophobic coating could be applied to different substrates (blocks, straw, and fabric). The cotton fabric exhibited an initial water contact angle (WCA) that increased from 73.4° to 129.6°, and excellent chemical and physical hydrophobic performance. Moreover, this coating has strong self-cleaning ability and could be used for oil–water separation. In this newly proposed fabrication, ethanol can be recovered in the preparation of lignin nanoparticles, which makes the green and facile preparation of a stable hydrophobic coating possible. Additionally, this work is important in upgrading formic acid lignin by controlling the polarity into value-added hydrophobic materials via green classification. [ABSTRACT FROM AUTHOR]

An efficient separation technology for hydrolysates towards a full valorization of bamboo is still a tough challenge, especially regarding the lignin and lignin-carbohydrate complexes (LCCs). The present study aimed to develop a facile approach using organic solvent extraction for efficiently fractionating the main components of bamboo hydrolysates. The high-purity lignin with only a trace of carbohydrates was first obtained by precipitation of the bamboo hydrolysate. The water-soluble lignin (WSL) fraction was extracted in organic solvent through a three-stage organic solvent extraction process, and the hemicellulosic sugars with increased purity were also collected. Furthermore, a thorough characterization including various NMR techniques (31P, 13C, and 2D-HSQC), GPC, and GC-MS was conducted to the obtained lignin-rich-fractions. It was found that the WSL fraction contained abundant functional groups and tremendous amount of LCC structures. As compared to native LCC of bamboo, the WSL fraction exhibited more typical LCC linkages, i.e. phenyl glycoside linkage, which is the main type of chemical linkage between lignin and carbohydrate in both LCC samples. The results demonstrate that organic phase extraction is a highly efficient protocol for the fractionation of hydrolysate and the isolation of LCC-rich streams possessing great potential applications. [ABSTRACT FROM AUTHOR]

Artificial antioxidants are synthesized from fossil sources and are now widely used in the polymer, food, and cosmetics industries. The gradual depletion of fossil resources makes it practically significant and necessary to produce green antioxidants from renewable lignocellulosic resources. Herein, short‐time hydrothermal (STH) treatment was developed for production of lignin‐derived polyphenol antioxidants (LPAs) from poplar wood under conditions of high temperature and high pressure. LPA yields from 21.5 to 37.6 % on the basis of lignin in untreated wood were obtained by STH treatments as result of lignin depolymerization at 190–200 °C and 10 MPa in 5–8 min. Depolymerization reactions were confirmed by the much lower molecular weight of LPA (1076 g mol−1) than that of native lignin (4094 g mol−1). NMR spectroscopy revealed the structural features of lignin in the isolated LPA, namely syringyl and guaiacyl units with well‐preserved interunit linkages. A Folin–Ciocalteu assay indicated that each LPA molecule contained 5.4 phenolic hydroxyl groups on average, much more than other technical lignins. The remarkable antioxidant ability of LPA was verified by the radical‐scavenging index of 53.5–67.3, much higher than 0.2–11.1 of the commercial antioxidants butylated hydroxytoluene (BHT) and butylated hydroxyanisole (BHA). STH treatment only requires water and heat for production of high‐value antioxidant, which provides a green and sustainable method for the utilization of lignocelluloses. [ABSTRACT FROM AUTHOR]

Lignin is the second largest component of vascular plants and is the most abundant renewable aromatic polymer on our planet. The attractiveness of lignin valorization lies in its conversion into high value aromatic chemicals and biofuels through fractionation and upgrading. The literature has demonstrated that the presence of aryl ether bonds in native lignin was a key factor for the conversion, while the conventional technical lignins from carbohydrate-first processes, e.g. pulp and cellulose ethanol production, are intensively condensed and lack these linkages due to the intense delignification conditions. Here, by using the β-O-4 lignin model dimer GG, we reveal the dramatic degradation of GG and the synchronous formation of relatively stable intermediate β-O-4 dimers, C6C3 enol ether and the formylated enol ether, within the first 5 min under the conditions of 72 wt% aqueous formic acid and 130 °C, conditions suitable for biomass fractionation. Based on these findings, we propose a simple but effective strategy of rapid flow-through fractionation (RFF), which separates the dissolved lignin from the reactor in time and space, thereby preserving these labile aryl ether bonds in native lignin. The application of RFF of poplar wood with a short residence time of 2.6 min attained 75% delignification with an equivalent of the β-O-4 motif in native lignin. Structure-preserved lignins (β-O-4 retention, 75.0%–85.4%) were also harvested from wheat straw with good lignin yields (61.7%–78.5%). Contrarily, batch fractionation acted as a protracted war and resulted in extensive cleavage of aryl ether bonds as suggested by 92%–100% loss of the β-O-4 motif under the same conditions. Because of the well-preserved structure, RFF lignin can be used as a good feedstock to boost its downstream valorization, especially for hydrogenolysis into monophenolic chemicals and fuels. It is noteworthy that the carbohydrate fraction from RFF retained structural integrity and almost reached theoretical yields for glucan and xylan. [ABSTRACT FROM AUTHOR]

Whole valorization of carbohydrate and lignin from biomass was achieved by rapid flow‐through fractionation (RFF) within 15 min. Wheat straw was effectively deconstructed into its principle components without degradation by using easily recyclable aqueous formic acid (72 wt %) at 130 °C. The obtained cellulose‐rich solid showed a nearly complete glucan recovery and 73.8 % glucose conversion after enzymatic hydrolysis. Xylan also reached full recovery with negligible furfural formation with a sum of 80 % of oligo/mono xylose in spent liquor and 20 % of xylan remaining in the solid. Up to 75.4 % lignin was dissolved in the spent liquor and further fractionated into water‐insoluble (WIL) and water‐soluble lignin (WSL) by dilution with water. WIL showed a non‐condensed and well‐preserved structure with 84.5 % β‐O‐4 remaining, which is believed to be beneficial for catalytic conversion into low‐molecular‐weight chemicals and fuels. The concentration of employed formic acid was below the formic acid/water azeotrope, and therefore the reaction medium could be restored through simple distillation. Together with the joint valorization of lignin and carbohydrates, the presented RFF is a promising process for sustainable biorefinery. Whole valorization of carbohydrate and lignin from biomass is achieved by rapid flow‐through fractionation within 15 min. Wheat straw is effectively deconstructed into its principle components without degradation by using easily recyclable aqueous formic acid (72 wt %) at 130 °C. The obtained cellulose‐rich solid shows a nearly complete glucan recovery and 73.8 % glucose conversion after enzymatic hydrolysis. [ABSTRACT FROM AUTHOR]

To promote the efficient utilization of lignocellulosic materials, one-step fractionation by formic acid-based organosolv process under pressure has been studied for converting lignocellulose in its main components. Lignin and hemicelluloses were selectively dissolved, while cellulose was not obviously degraded. Under optimized conditions (85% formic acid, a liquor-to-solid ratio of 7:1, and a temperature of 145°C for 45 min), this process provided a high efficient way to separate the main components of bamboo, obtaining 42.2% cellulose pulp, 31.5% lignin, 8.5% hemicellulose-rich fraction, 3.56% furfural and 3.80% acetic acid. Cellulose pulp with satisfying viscosity could easily be bleached to a high brightness of over 87% ISO with a short bleaching sequence, and had an acceptable paper strength properties. The recovered lignin fraction contained a small amount of carbohydrates and a considerable part of proteins and p-hydroxycinnamates. Additionally, the organic substances in hemicellulose-rich fraction obtained was composed of 95% carbohydrates, most of which was monosaccharides, as well as 5% lignin. [ABSTRACT FROM AUTHOR]

Pseudo-lignin induced by high-severity dilute acid treatment of lignocellulose has been widely studied because of its detrimental effect on enzymatic hydrolysis. However, cooling-induced pseudo-lignin (CIPL) formed during the cooling process after treatment has always been ignored and never been characterized systematically. To investigate the formation and chemistry of CIPL, liquid hot water treatments of poplar wood were conducted. Samples of treated wood and hydrolysate were taken out from digester at various temperatures during the cooling process for characterization. SEM images evidenced a progressive deposition of CIPL on the surface of the treated wood during cooling process with a yield of 19.6 mg/g treated wood. However, the treated wood which was collected isothermally at reaction temperature showed no pseudo-lignin. Variation of organic compounds in hydrolysate from lignocellulose degradation during cooling process revealed that depolymerized lignin and furfural accounted for 80.4 and 10.6 % of CIPL, respectively, while soluble saccharides from carbohydrate hydrolysis were independent from CIPL formation. These findings stress the importance of isothermal separation of treated wood and hydrolysate. Otherwise, CIPL should hinder enzymatic hydrolysis for biofuels production or delignification for cellulosic fiber production. [ABSTRACT FROM AUTHOR]

In this study, the base film (CSL) was prepared by blending tunicate cellulose nanocrystals (TCNCs) extracted from tunicate shells, with sodium alginate (SA) and alkali lignin (AL). Then, the mulching film (CSL-WK) was prepared using water-borne polyurethane (WPU) as binder to install low-energy Kaolin on the surface of CSL film. The influences of composition with different concentrations on mechanical properties were studied. The tensile strength and elongation at break of CSL-WK film could reach 86.58 MPa and 50.49 %, respectively. The mulching films were characterized by degradability test, SEM, FTIR, and TGA. TCNCs had good compatibility with SA and AL, and a rough structure was formed on the surface of the film to improve the hydrophobicity. The barrier properties, including ultraviolet resistance, water contact angle, water vapor permeability, water retention, and flame retardancy, were tested. The results showed that CSL-WK films could block 97 % of ultraviolet light, reduce about 25 % of soil water loss, and self-extinguish within 7 s of open flame ignition. Note that the secondary spraying method significantly improved the barrier property of films. This study lays a foundation for the preparation of ecologically friendly, biodegradable, and high barrier mulching film, and expands the application of marine resources. • The shells of the tunicates were firstly used to prepare mulching films. • Multiple biomass materials were used to prepare high barrier mulching film materials. • The film has excellent UV resistance, water vapor barrier, and flame retardancy. • The mechanical strength and barrier properties were improved by spraying process. • High b biomass mulch supports environmentally friendly agricultural practices. [ABSTRACT FROM AUTHOR]

Integrated fractionation process based on autohydrolysis (H) and subsequent formic acid delignification (FAD) has been considered as an effective strategy to separate the main lignocellulosic components in view of the biorefinery. For the better understanding of the structural changes of the lignin during the integrated process, the fractionated aspen lignins were thoroughly characterized by Fourier transform infrared (FT IR), 13C, two-dimensional heteronuclear single quantum coherence (2D-HSQC) and 31P nuclear magnetic resonance (NMR) spectroscopy, gel permeation chromatography (GPC), and thermogravimetric analysis (TGA). Compared to the milled wood lignin (MWL), the fractionated lignins had higher amounts of phenolic OH groups as due to the cleavage of β-O-4 linkages and less alcoholic OH groups mainly due to the esterification of the aliphatic OH groups by formic acid. Demethylation action of the lignin was not significant during the FAD process. More syringyl-propane (S) units were extracted during the H-FAD process than guaiacyl-propane (G) units resulting in a higher S/G ratio and more OCH 3 in the fractionated lignins. Furthermore, autohydrolysis of aspen at higher temperature led to more condensation of the fractionated lignins which exhibited higher molecular weight and more β-5 and β-β linkages. The fractionated lignins exhibited high purities due to the breakage of the lignin-carbohydrate bonds. • Lignin with high phenolic OH and OCH 3 and high purity was obtained. • Aliphatic OH group was highly esterified by formic acid. • β-O-4 cleavage accompanied by formation of condensed aromatic structure • Autohydrolysis led to higher molecular weight and less formate ester in lignin [ABSTRACT FROM AUTHOR]

The removal of lignin is important to the recovery of saccharides from the pre-hydrolysis liquor (PHL) in kraft-based dissolved pulp production. A one-step process for lignin removal from PHL via treatment with horseradish peroxidase (HRP) in the presence of Ca2+ was proposed, and its principle was studied. The results demonstrated synergy between HRP and Ca2+ in lignin removal from PHL, whereas NH 4 + had little effect on lignin removal. HRP treatment in the presence of 60 mmol/L of Ca2+ resulted in a lignin removal of 64.8% accompanied by a saccharide loss of 14.2%. HRP catalyzed both the polymerization and depolymerization of the lignin in the PHL. The HRP-catalyzed lignin polymerization rendered some lignin insoluble enabling it to be directly removed. The HRP-catalyzed depolymerization of lignin decreased its molecular weight with an evident increase in its carboxyl content. The insoluble complexes formed between the lignin with carboxyl and the Ca2+ facilitated the removal of the depolymerized lignin. • A new one-step process for effective lignin removal from PHL was proposed. • Synergy existed between HRP and Ca2+ in lignin removal from PHL. • HRP treatment in the presence of 60 mmol/L of Ca2+ yielded 64.8% lignin removal. • HRP treatment increased the carboxyl content of soluble lignin in PHL. • Complexes formed between Ca2+ and the carboxyl of soluble lignin to facilitate lignin removal. [ABSTRACT FROM AUTHOR]

A practical method for the preparation of lignin derivatives-light-colored bio-based particles (LC-BP) via the modification of hexamethylene diisocyanate (HDI) is presented in this work. In the mixed EtOH/H 2 O system, the change of solvent polarity induced the self-assembly of the lignosulfonate (LS) with the hydrophobic chromophores encapsulated inside the particles. The color of LS was reduced by the polymerization between the isocyanate groups (-N=C=O) of HDI and hydroxy groups of LS. Compared with the typical lignin-based adsorbent preparation process in the past, this is a simple, direct, and efficient preparation method and the synthetic LC-BP has good chemical stability and resistance to heat, acid and alkali. This effectively solves the problem that LS has high water solubility and is difficult to use directly for wastewater treatment. To investigate the properties, the synthetic LC-BP was characterized by SEM, specific surface area, L*a*b* (CIELAB) color space, FT-IR, XPS, and TGA. The results showed that the LC-BP exhibited obvious advantages in color reduction with a low CIE-L* value. The LC-BP exhibits a scale-like intercalation structure, which makes it a promising candidate for adsorbing tetracycline (TC) from wastewater. The conditions of pH, adsorbent dosages, adsorption time, and initial TC concentration were investigated, and the adsorption performance of LC-BP for TC was significantly better than that of conventional polyurethane particles (PP). The adsorption fitted the Langmuir model and there were hydrogen bonding, π-π conjugated binding, and electrostatic attraction during the absorption process. The adsorption capacity was up to 53.1 mg/g, and the removal rate was 67 %. The utilization of LC-BP, a low-cost, effective, and renewable resource derived from natural biomass, holds immense practical and economic potential in wastewater treatment. [Display omitted] • A practical method for the preparation of light-colored lignin • The theoretical basis of lignin-based biomacromolecular compounds was proposed. • Rearrange chromophoric groups of lignin by isocyanate modified • The product can be used as efficient adsorbent for colored wastewater. [ABSTRACT FROM AUTHOR]

Highly hydrophobic fabrics by chelating lignin (alkali lignin, sodium lignin sulfonate and formic acid lignin) with metal ions (Fe3+, Fe2+ and Cu2+) were prepared with the surface wettability from superhydrophilic to highly hydrophobic. The lignin/metal chelated particles are in-situ deposited onto the fabric surface using dip-coating. Different lignin/metal ion system influenced the construction of hierarchical surface roughness and energy of fabrics greatly. Specially, the formation of homogeneous spherical particles on surface contributed to the minimal contact area of water droplets and fabric, and thus avoiding their adherence. The surface morphology results showed that the active groups of lignin is closely related with the surface roughness. It was found that the alkali (AL)/FeⅢ@cotton fabric achieved a maximum water CA value of 149.9° and a low surface energy of 1.90 mN/m. Its oil-water separation efficiency was higher than 99.9% and the resultant AL/FeⅢ@cotton fabric owned an excellent stability and suitability under harsh conditions. Collectively, this work is greatly significant for achieving the high-value utilization of lignin in wastewater treatments. [Display omitted] ● In-situ deposition of lignin/metal ion lowered the surface energy of fabrics. ● Phenolic hydroxyl content of lignin affected the size of lignin/metal chelates. ● Deposited lignin/metal chelates influenced the durable hydrophobicity of fabrics. ● Al/Fe3+ conferred the fabric highest hydrophobicity with the WCA value of 149.9°. ● The resultant fabric exhibited an excellent oil-water separation and stability. [ABSTRACT FROM AUTHOR]

The majority of current oral drugs are hydrophobic, and have the toxic side effects to the gastrointestinal tract, which limit their therapeutic efficacy. In order to improve the performance of drug formulations, the development of new functional materials is crucial for the technological breakthroughs in the pharmaceutical industry. The antimicrobial and antioxidant properties of lignin nanoparticles (LNPs) give them great potential for application in this field. LNPs consist of a hydrophilic shell and hydrophobic core, which is particularly suitable for the capsulation of hydrophobic drugs, and then it would increase the stability and solubility of drugs and reduced the irritation to the stomach. In this study, alkali lignin (AL) was fractionated by 80% methanol to obtain targeted MAL with low molecular weight, high phenolic hydroxyl content and good homogeneity. The LNPs was prepared by quaternization modification of MAL and self-assembling in an ethanol/water mixture. Their application in the hydrophobic oral drug delivery system was evaluated and Ibuprofen (IBU) was used as a drug pattern. The effect of solvent exchange time (24 h, 36 h, 48 h and 60 h) on the formation process of IBU-loaded LNPs (IBU-LNPs) was investigated. The in vitro release experiments were conducted and it revealed that IBU release occurred priority in the intestine rather than the stomach, which were meeting the release requirements of ideal oral carrier. In addition, IBU-LNPs showed non-cytotoxic against the L929 cells and improved the bioavailability of IBU drugs. Therefore, this work proposes a preparation method of the smart lignin nanoparticle by screening characteristic lignin with higher reactivity and by modulating the solvent exchange time during the preparation process. Overall, LNPs showed the great potential of application in pharmaceuticals industry and was demonstrated a promising and green product. • Lignin nanoparticles (LNPs) were prepared with the objective of evaluating their application as a novel oral drug delivery system. • The novel LNPs have an optimal size, high encapsulation efficiency, and a sustained pattern of Ibuprofen release in the simulated intestinal fluid, and excellent stability in the gastric condition. • LNPs increase the bioavailability of Ibuprofen and show non-cytotoxic against the normal cells. [ABSTRACT FROM AUTHOR]

The removal of colloidal particle and lignin from a pre-hydrolysis liquor (PHL) of biomass is essential for its processing as well as for the value-added utilization of saccharides in the PHL. In this paper, pectinase was used to treat an aspen PHL obtained by pre-hydrolysis at 160 °C, and a novel process in which pectinase treatment was followed by cationic polymer flocculation to enhance colloidal particle and lignin removal was investigated. The results showed that pectinase treatment caused an approximately 50% decrease in the cationic demand of the aspen PHL. For the controlled PHL, approximately 68 mg/L poly-dimethyl diallyl ammonium chloride (pDADMAC) was needed to remove nearly all of the colloidal particles with 40.3% maximum lignin removal; for the enzyme-treated PHL, only approximately 34 mg/L pDADMAC was needed to remove nearly all of the colloidal particles with 43.3% lignin removal. In addition, the enzyme treatment decreased the loss of saccharides during subsequent pDADMAC treatment at the concentration necessary for maximum lignin removal. [ABSTRACT FROM AUTHOR]

Bamboo chips were efficiently fractionated using an integrated process of autohydrolysis and formic acid to induce rapid delignification. Autohydrolysis pretreatment facilitated oligosaccharide production, while the subsequent rapid-delignification using formic acid at a low liquid/solid ratio with a relatively short reaction time allowed obtaining cellulose fibers and lignin. The major inter-unit linkages of side-chain in lignin were cleaved during the combined fractionation process. The lignin fraction exhibited higher purity, more phenolic OH groups, less condensed phenolic OH groups, and higher syringyl/guaiacyl ratio (S/G) as compared to MWL and formic acid lignin from the direct formic acid delignification. These results indicate that the combined fractionation process presents a promising approach to the commercial utilization in the biorefinery industry. [ABSTRACT FROM AUTHOR]

[Display omitted] • Poplar was pretreated by reusable organic solvent under mild temperature (≤100 °C). • Almost all hemicelluloses and part of lignin was extracted with cellulose retained. • Sulfonic acid groups were introduced into lignin structure remained in substrates. • 89% improved glucose conversion compared with that of non-sulfonated substance. • New strategy is exploited to realize sulfonation and promote biomass bioconversion. Biomass pretreatment is an essential strategy to overcome biomass recalcitrance and promote lignocellulosic bioconversion. Here, a reusable organic solvent system (formic acid-methanesulfonic acid) was explored to pretreat poplar under a mild temperature (below 100 °C). The results showed that the co-solvent system could extract basically complete hemicelluloses and part of lignin with original cellulose retained in the pretreated substrates. Meanwhile, sulfonic acid groups were introduced into lignin structure remained in the substrates. The glucose conversion yield of the substrates with a higher concentration of sulfonic acid groups (13.2 mmol/kg) reached 45.9 % by reducing the hydrophobic interaction between lignin and cellulase, showing 89.3 % improvement compared with that of the substrates treated with single formic acid. This progressive study aimed to develop a new strategy to realize sulfonation and promote enzymatic hydrolysis of substrates by using mild organic solvent pretreatment. [ABSTRACT FROM AUTHOR]

Saccharides and lignin components in prehydrolysis liquor (PHL) from kraft-based dissolving pulp production was characterized after being fractionated using membrane filtration. The results showed that the membrane filtration provided a method for organics fractionation with considerable recovery rate, but exhibited some disadvantages. Besides the limited ability in purifying oligosaccharides (OS) due to the overlaps of molecular weight distribution with lignin components, the membrane filtration could not improve the homogeneity of OS as indicated by the analysis of chemical compositions and the degree of polymerization (DP), which may be ascribed to the linear conformation of OS. The characterization of lignin components indicated a great potential for polymer industry because of the remarkable content of phenolic hydroxyl groups (PhOH), especially for low molecular weight (LMW) fraction. It was concluded the organics in PHL provided streams of value-added chemicals. However, the practical significance thereof can be realized and maximized only when they are successfully and completely fractionated. [ABSTRACT FROM AUTHOR]

The specific elimination of lignin derivatives from wood hydrolysate without sugar loss has great practical significance to biorefinery and bioenergy. In the present study, a process consisting of calcium hydroxide and anion exchange resin treatments was developed for the purpose of selective removal of lignin from wood prehydrolysis liquor (PHL). Particular emphasis was made on the ionization of phenolic lignin, and the subsequent binding to metallic salts. It was observed that phenolic hydroxyl groups (PhOH) in lignin played an important role in lignin removal. The results showed that up to 95.2% lignin was removed from PHL with 78.8% sugar recovery. This suggested that the proposed process is highly specific to lignin, and therefore can be envisaged as a great contribution to wood-sugar production or bioenergy conversion. [ABSTRACT FROM AUTHOR]

Highlights: [•] OS recovery from HWE by specific lignin precipitation and subsequent dialysis. [•] Controlled charge neutralization by PAC for specific lignin precipitation. [•] Selective removal of large molecular lignin facilitates OS purification by membrane. [•] OS production from HWE by proposed process attains 56.36g per kg wood. [ABSTRACT FROM AUTHOR]

Ethanol extraction of lignocellulosic biomass under mild conditions has re-attracted considerable attention since a light-colored lignin with low molecular weight can be obtained. Unfortunately, the yield of isolated lignin for the ethanol extraction process is very limited. To enhance the extraction efficiency of lignin from poplar, ultrasound was used to assist the ethanol extraction and the isolated lignin was analyzed in terms of structure features and functional properties. As expected, increasing the ultrasonic power and ultrasonic time led to higher lignin yields during the ultrasound-assisted ethanol extraction (UAEE) process. The chemical structure of the isolated lignin (UAE-L) was almost completely retained, the C-O (mainly β-O-4) linkages in the lignin only exhibited a slight decrease, while the C-C (β-β, β-5, and β-1) linkages were nearly unchanged. The UAE-L was light in color and had more phenolic hydroxyl groups, less carbohydrate impurities, lower molecular weight and narrower polydispersity as compared to the poplar MWL. The UAE-L could scavenge more 2,2-diphenyl-1-picrylhydrazyl radicals (DPPH·), displaying a stronger antioxidant activity. Moreover, the UAE-L showed good UV-absorbing properties in both UVA and UVB regions. These results indicated that the UAE-L has great potential for replacing the commercial synthesized antioxidant and anti-UV ingredients. The overall scheme of the isolation process of lignin from poplar by ultrasonic-assisted ethanol extraction (UAEE). [Display omitted] • Ultrasound was employed to enhance ethanol extract of lignin. • Light-colored lignin with abundant phenolic -OH and low molecular weight was obtained. • Lignin unit with less ortho- methoxy substitutions was preferentially released. • UAE-L showed good antioxidant activity and broad-spectrum UV-absorption capacity. [ABSTRACT FROM AUTHOR]

[Display omitted] • Pre-hydrolysis is considered as a promising technology in the biorefinery process. • "Pseudo-lignin" were formed and deposited on biomass surface during pre-hydrolysis. • The surface-deposits could be removed efficiently by isothermal phase separation. • More sugars were extracted by interrupting the formation of "pseudo-lignin". • The efficient removal of surface-deposits improved subsequent enzymatic hydrolysis. During the traditional autohydrolysis, formation and deposition of "pseudo-lignin" and lignin droplets on the surface of biomass had a detrimental effect on the subsequent biomass conversion. In this study, isothermal phase separation was introduced into autohydrolysis, and the effects of isothermal phase separation on the dissolution of components and enzymatic hydrolysis of bamboo were studied. The research showed that isothermal phase separation after autohydrolysis without cooling had an effective reduction in the deposition of "pseudo-lignin" and lignin droplets on the residues surface. After isothermal phase separation, the contents of sugar (14.05 g/L) and lignin (6.16 g/L) in pre-hydrolysates increased by 20% and 19% compared with control, respectively. Moreover, the efficient removal of "pseudo-lignin" and lignin droplets from cell wall surface could further promote the biological conversion of pretreated biomass (22% higher than that of control) during the subsequent enzymatic hydrolysis. [ABSTRACT FROM AUTHOR]

Abstract: An approach aiming at improving paper properties is to use laccase to copolymerize low-molecular weight phenols with the pulp before papermaking. The addition of methyl syringate (MS) gave a twice wet tensile index of unbleached kraft pulp with laccase treatment but had little effect on the dry tensile index and substantially decreased the brightness of pulp. The radical concentration in laccase-treated fibers increased up to 2.5 times of that in control sample after 60min. The radical concentration in laccase/MS-treated fibers increased up to 20 times of that in control sample within 2min, and a highest radical concentration (increased by near 65 times) was obtained after 40min. A strong agglutination of large-area fibers in handsheet was observed after laccase/MS treatment. The surface lignin coverage of the laccase-treated fibers increased from 54.96% (control) to 59.36%, while that of the laccase/MS-treated fibers increased only up to 55.22%. It is suggested that the graft of MS on fiber and degradation of surface lignin occurred simultaneously. The addition of MS can enhance the activation of fibers and extend the enzymatic oxidation of lignin within the cell wall. An increased bonding area of fibers resulting from interaction of laccase, MS and fibers via radical-coupling reaction maybe account for the significantly improved wet strength of pulp. [Copyright &y& Elsevier]

[Display omitted] • Lignin recovery from PHL and adsorbent preparation was achieved in one step. • The lignin was modified and recovered from PHL via HRP treatment. • Lignin recovered from PHL by HRP treatment was a good adsorbent for MB removal. • The maximum MB adsorption capacity of EML was 241.1 mg/g at 308 K. The lignin in PHL could be modified and recovered from pre-hydrolysis liquor (PHL) by horseradish peroxidase (HRP) treatment. The enzyme-modified lignin (EML) separated from PHL was used to adsorb and remove methylene blue (MB) from a model dye effluent; the adsorption performance of EML was studied. The results indicated the carboxyl content of the lignin in PHL increased by HRP treatment, and the EML removed from PHL had a carboxyl content of 0.69 mmol/g and a BET surface area of 25.6 m2/g. With the increase of pH, the adsorption capacity of EML obviously increased. The maximum MB adsorption capacity of EML was 210.2 mg/g and 241.1 mg/g at 298 K and 308 K, respectively. The fitting results revealed that the equilibrium adsorption isotherms and adsorption kinetics followed the Langmuir model and pseudo-second-order model, respectively. [ABSTRACT FROM AUTHOR]