Search

Abstract: A fundamental difference between ITER and present devices is the need to shield against 14MeV neutrons. This has major consequences for plasma start-up/rampdown (su/rd) and also for protecting the first wall from plasma contact. This has led to design decisions: (a) not to place in front of the n-absorbing blanket a separate wall-limiter structure, (b) to modularize the blanket into ∼400 remote handling compatible blanket modules (BM), and (c) to shape the front face of the BMs for plasma contact. Combined protection-su/rd options are considered here for the inner and outer wall with regard to optimal shaping. Unfortunately, the modularity of the BM system (inter-BM gaps and misalignments) requires shaping of the BM faces that increases peak power loads by ∼10× relative to the ideal (continuous, circular) wall-limiter. Fortunately, the level may still be acceptable, ∼2MW/m2, even for su/rd power of 7 MW. [Copyright &y& Elsevier]

Abstract: A precise geometric method is used to calculate the power deposition on the future JET ITER-Like Wall beryllium tiles with particular emphasis on the internal edge loads. If over-heated surfaces are identified, these can be modified before the machining or failing that actively monitored during operations. This paper presents the methodology applied to the assessment of the main chamber beryllium limiters. The detailed analysis of one limiter is described. The conclusion of this study is that operation will not be limited by edges exposed to plasma convective loads. [Copyright &y& Elsevier]

Abstract: On the limiter of Tore Supra, the heat loads map computed from deconvolution of IR surface temperatures shows good agreement with calorimetry measurements. This experimental heat pattern allows deducing the heat fluxes in the scrape-off layer using a 3D magnetic calculation and assuming only parallel heat transport along field lines. This calculation leads to an underestimation of the power circulating in the edge plasma according to the power balance, similarly to RFA measurements. The comparison between experimental heat loads on the limiter and modelling also shows a spreading of heat fluxes near the LCFS that cannot be explained only by parallel transport in the SOL. [Copyright &y& Elsevier]