Search

A transflective liquid crystal display using polymer-stabilised vertical alignment mode with fishbone-shaped electrode structure is proposed. Using the polymer stabilisation technique and patterned direction of pixel electrode structure, initial surface tilt angle and azimuthal angle can be well defined such that the liquid crystal is almost vertically aligned in the transmissive part while it has a certain pretilt angle that satisfies effective retardation of λ/4 with azimuthal direction of 45o with respect to the analyser in the reflective part. With optimisation of cell structures and surface tilt angles in the transmissive and reflective parts, a high performance transflective display showing excellent readability in any environment light conditions and single-gamma characteristic without using any retardation film or in-cell retarder can be achieved. [ABSTRACT FROM AUTHOR]

For the fabrication of protrusions in multi-domain vertical alignment liquid crystal displays (MVA-LCDs), a series of complicated and expensive photolithographic processes has to be gone through for the wide viewing angles. In this research, we proposed and demonstrated a new manufacturing approach of the protrusion utilising ink-jet printing technology. Parallel lines were ink-jet printed on the substrates and solidified by a subsequent baking process, and then used as the protrusions of MVA-LCDs. The geometric dimensions of the protrusion patterns were optimised by the comparison of experimental observations and computer simulation results. The MVA-LCD cell was fabricated by arranging the protrusion lines forming right angles between the top and the bottom lines, which resulted in cross-line protrusions. Due to the square-shaped geometric arrangement of the protrusions, the vertically aligned LCs formed the symmetric four-domains in the MVA-LCD cell. With the help of a surface polymer-stabilisation technique, the response time of the LC molecules under the electric field was significantly improved. Therefore, we can conclude that, without sacrificing the viewing angle and response time of MVA-LCD, the printing technique for the formation of the protrusions can give us a new fabrication opportunity with low cost in contrast to the conventional photolithography process. [ABSTRACT FROM PUBLISHER]

A nano-material called POSS (Phenethyl-Poly Oligomeric Silsesquioxane) provides vertical alignment of LC on substrate without using conventional polymer type of vertical alignment layer. However, it still has many problems like aggregation because of high concentration doping. We synthesise new type of POSS which shows good dispersion with LC and found out that even very low 0.1 wt % into LC, uniform vertical alignment is achieved through diffusuion process from bulk LC to surface of the substrates. [ABSTRACT FROM AUTHOR]

We propose a pixel electrode structure for the multi-domain vertical alignment liquid crystal mode with high optical efficiency. We form a micro-slit electrode structure on the top substrate to reduce the width of disclination lines at domain boundaries. We insert additional electrodes on the bottom substrate to improve the transmittance at the edges of each pixel. We confirm that using both structures, the transmittance can be increased from 22.9% to 27.3% with no change in the operating voltage. [ABSTRACT FROM AUTHOR]