Search

Compared with the in-plane switching (IPS) mode of the liquid crystal display (LCD), the vertical-alignment (VA) LCD mode provides an excellent contrast ratio and a fast response time, but it still has a relative weakness: image quality deterioration as a function of the viewing direction. In the VA mode, the pixel division method, in which two different gamma curves from the divided pixels are integrated, is generally used to improve the off-axis image quality. Reported herein is the new VA mode for enhancing the off-axis image without decreasing the transmittance. The pixels divided into 12 domains instead of 8 using double electrode layers produce three different gamma curves from the high, middle, and low pixels, which are combined and enhance the image quality. In this pixel structure, the middle pixels are formed by two electrode layers and produce the third gamma curve. The new design of the VA mode shows the best off-axis image quality in the VA mode, which is the most comparable with that in the IPS mode, even with the organic light-emitting diode, and will provide a solution for the heavy competition in the ultrahigh-definition (UHD) and large-LCD-TV-panel market in the very near future. [ABSTRACT FROM AUTHOR]

A transflective liquid crystal display using polymer-stabilised vertical alignment mode with fishbone-shaped electrode structure is proposed. Using the polymer stabilisation technique and patterned direction of pixel electrode structure, initial surface tilt angle and azimuthal angle can be well defined such that the liquid crystal is almost vertically aligned in the transmissive part while it has a certain pretilt angle that satisfies effective retardation of λ/4 with azimuthal direction of 45o with respect to the analyser in the reflective part. With optimisation of cell structures and surface tilt angles in the transmissive and reflective parts, a high performance transflective display showing excellent readability in any environment light conditions and single-gamma characteristic without using any retardation film or in-cell retarder can be achieved. [ABSTRACT FROM AUTHOR]

A nano-material called POSS (Phenethyl-Poly Oligomeric Silsesquioxane) provides vertical alignment of LC on substrate without using conventional polymer type of vertical alignment layer. However, it still has many problems like aggregation because of high concentration doping. We synthesise new type of POSS which shows good dispersion with LC and found out that even very low 0.1 wt % into LC, uniform vertical alignment is achieved through diffusuion process from bulk LC to surface of the substrates. [ABSTRACT FROM AUTHOR]

We propose a pixel electrode structure for the multi-domain vertical alignment liquid crystal mode with high optical efficiency. We form a micro-slit electrode structure on the top substrate to reduce the width of disclination lines at domain boundaries. We insert additional electrodes on the bottom substrate to improve the transmittance at the edges of each pixel. We confirm that using both structures, the transmittance can be increased from 22.9% to 27.3% with no change in the operating voltage. [ABSTRACT FROM AUTHOR]