Search

We obtained a new system containing nematic liquid crystal doped with nanostructured copolymer-clay particles. The clay (Cloisite-type) was modified by copolymerization of maleic anhydride and divinyl benzene and the nanocomposite has intercalated structure. Current-voltage characteristics of the liquid crystal/copolymer-clay systems were analyzed and the electro-optical response at heating -cooling cycles for different applied electric fields is discussed. Dielectric spectroscopy measurements in the low frequency domain have shown different regimes of its temperature dependence as function of the sample nature and the applied voltage. Comparison is made with the bulk liquid crystal. Changes of the phase transition temperature are thus revealed. [ABSTRACT FROM AUTHOR]

• Polymer Dispersed Liquid Crystal (PDLC) systems using chitosan biopolymer matrix and the nematic liquid crystal (LC) mixture E7 were obtained. • The N-Iso phase transitions have shifted in the heating DSC scan to lower temperature values for PDLC samples with approximately 2.7 °C. • Dielectric loss and electrical conductivity spectra along with their temperature variation have been analyzed. • Havriliak-Negami function was used for obtaining the characteristic time and the activation energy. Polymer Dispersed Liquid Crystals (PDLC) systems were obtained using chitosan as a biopolymer matrix and the nematic liquid crystal (LC) mixture E7 in various concentrations (30, 40 and 50% E7 in chitosan). Several techniques were used to analyze the obtained films: polarizing optical microscopy (POM), IR spectroscopy (FTIR), differential scanning calorimetry (DSC) and dielectric spectroscopy (DS). FTIR spectroscopy revealed minor changes for all PDLC films, suggesting weak interactions between LC and chitosan matrix. For each sample a clear segregation of the nematic droplets could be observed by POM. DSC measurements show that the phase transitions have shifted to lower temperature values for PDLC samples with approximately 2.7 °C compare to pure E7. The values of α (fraction of LC in the droplets) for compositions of 30, 40 and 50 wt% E7 in Chitosan were 0.48, 0.55 and 0.61 respectively, that are lower than for E7/PMMA system. The qualitative and quantitative analysis of the permittivity spectra obtained by DS reveals the fact that there are no significant changes in the molecular dynamics attributed to pure LC E7 compared to the PDLC composites, leading to the conclusion of the existence of a weak interaction between the two components, fact confirmed by the findings from the FTIR results. [ABSTRACT FROM AUTHOR]

[Display omitted] • Lanthanide complexes with N-substituted-4-pyridones ligands with mesogenic 3,4 or 3,5-di(alkyloxy)benzyl units. • The complexes show typical lanthanide solid state emission and lamellar phases (SmA). • Substitution pattern and length of flexible alkoxy chains control the phase-transition characteristics. • Dielectric spectroscopy was used to evaluate the dipolar relaxation processes and phase transitions. In the present work, new luminescent lanthanide complexes with extended mesomorphic range were prepared by coordination to lanthanide ions (Eu3+, Sm3+ and Tb3+) of the new 4-pyridone based organic ligands (L) with 3,4- (7- n ) and 3,5-di(alkyloxy)benzyl (8- n ) mesogenic groups and variable length (n = 12 or 14 carbon atoms) onto the benzyl unit. The cumulative results of the elemental analyses as well as the 1H, 13C NMR and IR spectroscopies support the structure of the organic derivatives and their lanthanide complexes [LnL 3 (NO 3) 3 ] (9- n /Ln and 10- n /Ln) described in this work. These complexes show characteristic lanthanide solid state emission, both at room and elevated temperatures corresponding to crystalline, glassy or liquid crystal states. The long range SmA phases displayed by all complexes were supported by a combination of characterization methods, including: differential scanning calorimetry (DSC), polarizing optical microscopy (POM) and variable-temperature powder X-ray diffraction (XRD). This work shows that the number, substitution pattern and length of flexible alkoxy chains are important parameters to control the phase-transition characteristics of the lanthanide complexes. Complexes with 3,4-disubstituted pattern (9- n /Ln) show higher clearing temperatures (nearly 60 °C for Eu3+, 70 °C for Sm3+ and 85 °C for Tb3+ complexes) compared to their counterparts with 3,5-disubstituted pattern (10- n /Ln). Moreover, complexes 9- n /Ln crystallize when cooling their LC phase while complexes 10- n /Ln are stable in glassy state at room temperature as a consequence of the different close interdigitated molecular packing evidenced by XRD measurements. Dielectric spectroscopy was employed to detect the changes of order degree specific to each phases (crystalline, LC or isotropic). The variation of dielectric constant and the electrical conductivity versus temperature shows three transition intervals for selected complexes 10- 14 /Sm and 10 - 14 /Tb, which delimit the main intervals: 45–60 °C, 90–110 °C; 140–160 °C corresponding to the Cr 1 -Cr 2 , Cr 2 – SmA and SmA-Iso transitions, and agree very well with the DSC results. The change of characteristic time, obtained by Havriliak-Negami fit function, with temperature also provides a very good correlation with the DSC and POM results. [ABSTRACT FROM AUTHOR]

Abstract: The molecular mobility of 4-butyl- and 4-pentyl-4′-cyanophenyl benzoate (CP4B, CP5B) and their composites prepared from aerosil A380 was investigated by broadband dielectric spectroscopy in a large temperature range. Thermogravimetric and infrared investigations were additionally performed. High silica density (larger than 7g aerosil/1g of liquid crystal) was selected to observe a thin layer adsorbed on the surface of the silica particles. The data were compared with those of the member of the series with six carbon atoms in the alkyl tail. Bulk CP4B and CP5B show the dielectric behaviour expected for liquid crystals. For the composites one relaxation process is observed at frequencies much lower than those for the corresponding bulk, which was assigned to the dynamics of the molecules in a surface layer. The temperature dependence of the relaxation rates (and of the dielectric strength) shows a crossover behaviour with two distinguished regimes. At higher temperatures the data obey the Vogel–Fulcher–Tammann law, whereas an Arrhenius law is observed at lower temperature, in a close similarity to the behaviour of a constrained dynamic glass transition. The estimated Vogel and crossover temperature is independent on the tail length, while the activation energy for the low temperature branch increases weakly with increasing the alkyl tail. [Copyright &y& Elsevier]

Abstract: Composites prepared from aerosil A380 and liquid crystals (LCs) of 4-n-alkyl-4′-cyanophenyl benzoate type, with four to six carbon atoms in the alkyl chain were investigated by infrared spectroscopy. Their high silica content (of 2–7g aerosil/1g of LC) was given by thermogravimetric investigations and allows the observation of a rather thin LC layer on the silica particles. Several surface species onto the external surface of the grains were demonstrated. Arguments are given that monomer and dimer species are present in the bulk cyanophenyl benzoate materials while bulk-like species along with hydrogen-bonded ones coexist in the so-called surface layer of the composites. The main interaction of LC molecules with the aerosil surface is by hydrogen bonding taking place with the involvement of the cyan group. There is a contribution of ester carbonyl group to these surface interactions but this cannot be well quantified. [Copyright &y& Elsevier]