Search

SiO x has aroused great attractions as a promising substitute for the anode materials of high-performance lithium-ion batteries (LIBs) because of the high specific capacity and the longer cycle life as well as relatively low volume expansion compared to Si. However, the unstable structure and poor conductivity of the SiO x lead to unideal electrochemical properties in LIBs, and thus hindering the widespread application of the SiO x anode. Herein, a facile approach has been put forward to prepare the high-performance mesoporous structure SiO x /carbon (m-SiO x /C) composites by electrospinning technique and sintering processes. The spherical SiO x nanoparticles are well anchored on the carbon fibers, and the reserved space can accommodate large volume expansion of the SiO x materials. Besides, the fibrous carbon materials can significantly enhance the conductivity for the SiO x anodes. Therefore, the resultant m-SiO x /C composites exhibit high discharge specific capacity of 1434 mAh g−1 at 500 mA g−1 with 67.5% capacity retention after 500 cycles and the good rate properties of 410 mAh g−1 at 2000 mA g−1. In consequence, the reasonable structural design and innovative fabrication technique can facilitate the practical application for the m-SiO x /C composites and further promote the comprehensive electrochemical performance of LIBs. [ABSTRACT FROM AUTHOR]

Oriented construction of high-performance mesoporous TiNb 2 O 7 (m-TNO) is important to the design innovation of anode material for next-generation lithium-ion batteries (LIBs) due to the high capacity and long cyclic life of m-TNO. However, the conductivity enhancement of m-TNO and thus accelerating Li+ transfer is still the key point to realize its practical application in LIBs. In this work, a synergistic strategy based on the single-core/dual-shell m-TNO@TiC@NC hierarchical structure is put forward, which is achieved by using m-TNO as host architecture as well as TiC and N-doped carbon layer (NC) as dual-shell layers. The results show that the m-TNO@TiC@NC hierarchical structure can not only provide an integrated conductive network to improve the conductivity of m-TNO, but also can establish a reinforced structure to maintain the anode stability. Besides, it is found that the m-TNO@TiC@NC composite has a high capacity of 328.6 mAh g−1 at 0.5 C after 200 cycles and a high-rate capacity of 186.4 mAh g−1 at 5 C by galvanostatic discharge-charge tests. Therefore, this kind of special single-core/dual-shell structure design can convincingly enhance the conductivity of m-TNO and facilitate the Li+ transfer rate, thus promoting electrochemical performances of LIBs due to the synergistic effect of dual-shell layers. Image 1 • The m-TNO@TiC@NC composite is achieved by using m-TNO as host architecture as well as TiC and NC as dual-shell layers. • The m-TNO@TiC@NC composite shows the single-core/dual-shell hierarchical structure. • The new-type ceramic material TiC is used as conducting layer. • The m-TNO@TiC@NC composite displays good electrochemical performance. [ABSTRACT FROM AUTHOR]