Search

All‐solid‐state batteries with solid ionic conductors packed between solid electrode films can release the dead space between them, enabling a greater number of cells to stack, generating higher voltage to the pack. This Review is focused on using high‐voltage cathode materials, in which the redox peak of the components is extended beyond 4.7 V. Li−Ni−Mn−O systems are currently under investigation for use as the cathode in high‐voltage cells. Solid electrolytes compatible with the cathode, including halide‐ and sulfide‐based electrolytes, are also reviewed. Discussion extends to the compatibility between electrodes and electrolytes at such extended potentials. Moreover, control over the thickness of the anode is essential to reduce solid‐electrolyte interphase formation and growth of dendrites. The Review discusses routes toward optimization of the cell components to minimize electrode‐electrolyte impedance and facilitate ion transportation during the battery cycle. [ABSTRACT FROM AUTHOR]

The design of high‐energy‐density batteries is the future goal of research on Li‐ion batteries. Halide‐type solid‐state electrolytes (SSEs) exceed their counterparts in terms of their stability at high potential. In this minireview, we discuss the developments in the work on halide‐type SSEs for all‐solid‐state Li batteries. In particular, we focus on the Li3InCl6 structure. The effect of synthesis routes on this structure, as well as the convertible products resulting from its phase changes, is discussed. Conductivity can be increased and the electrochemical window can be improved through doping with different materials. Our review aims to provide readers with an overview of the stability and degradation of Li3InCl6 SSE and the structure of halide‐type SSEs (Li–M–X, where M is a metal and X is a halogen). [ABSTRACT FROM AUTHOR]

Li-ion batteries play a significant role in portable electronic devices in the running world. However, the limited energy density still needs to be improved for the growing future. Hence, we developed a photocathode nanocomposite material composed of Cadmium Selenide/Zinc Sulfide Quantum Dots with Carbon nanotube (CdSe/ZnS QD@CNT) for an efficient and tunable performance of the photoelectrochemical Li–O 2 battery system to overcome the key issue of overpotential. The QD and CNT networks can provide efficient transportation paths of the electron–hole pairs and the O 2 gas and lithium ions, respectively. The charging voltage of the photoelectrode is 2.65–4.0 V; therefore, decreased overpotential was due to efficient oxidation of Li 2 O 2 by photoexcited electron–hole pairs by using QDs, resulting in a long-term operational stability over 100 cycles. On the basis of the advantages, the QDs exhibit efficient potential in Li–O 2 batteries. [ABSTRACT FROM AUTHOR]

A graphene/silicon (Si) multilayer sandwich structures are fabricated using electron beam (EB) deposition without air exposure. The graphene and Si thin films are formed on Cu current correctors through a continuous process in high-vacuum EB chamber. Synthesized graphene should be suggested to the stacked multiple layer from Raman analysis. The fabricated multilayer films are used as anodes. In the beginning, the half-cell, which used a seven-layer of each thickness 50-nm graphene and Si film, exhibits good specific capacity retention over 1000 mA h g −1 after 30 charge/discharge cycles. The capacity value changed with the number of graphene and Si layers. In this study, the number of layers that exhibited optimal properties is seven. Morphological investigation showed a fine layer-by-layer structure. The relationship between different thicknesses of graphene and Si is investigated at 7 L. A 100-nm thickness exhibited optimal properties. Finally, the optimal 7 L and 100-nm thick graphene/Si exhibited high discharge capacitance >1600 mA h g −1 at a current density of 100 mA g −1 after 30 cycles. Initial coulombic and reversible efficiencies exceed 84%. The capacity retention (30th/1st discharge value) at 100 nm and 7 L exceeds 90%. Finally, the soft package battery is assembled by combining the fabricated graphene and Si electrode as anode, LiCoO 2 as cathode, separator and liquid electrolyte. It can be used for commercial light-emitting diode (LED) lighting even under bending status. [ABSTRACT FROM AUTHOR]