Search

The all-solid-state lithium batteries using solid electrolytes are considered to be the new generation of devices for energy storage, which might be a key solution for power electric and hybrid electric vehicles in the future. This review focuses on the crystal structures and electrochemical properties of sulfide solid electrolytes. They are classified to several subgroups according to their chemical compositions, namely thiophosphates, halide thiophosphates, sulfide without phosphorus, and glassy sulfides electrolytes, which might be potential solid electrolytes in lithium batteries and may replace the currently used polymeric electrolytes for LIBs. Through discussion, this review provides an insight into future promising sulfide electrolytes. [ABSTRACT FROM AUTHOR]

α -LiFeO 2 and its nanocomposite with porous carbon ( α- LiFeO 2 / PC) is prepared by a simple one-step solid-state method. They are characterized by powder X-ray diffraction, scanning electron microscope, transmission electron microscope, thermogravimetry, differential scanning calorimetry, X-ray photoelectron spectroscopy, Raman spectrum, and BET surface area analysis techniques. When composited with PC, α- LiFeO 2 particles with smaller sizes locate on the surface or insert in the pores of PC. α- LiFeO 2 /PC can deliver the first discharge capacity of 1830 mAh/g, and 792 mAh/g can be maintained after 120 cycles at 0.1 C. Its capacity can reach to 570 mAh/g after 120 cycles even at 1C. The facile preparation method and nice electrochemical data, together with cheap and eco-friendly iron sources, make α- LiFeO 2 /PC a promising anode material for lithium-ion batteries. [ABSTRACT FROM AUTHOR]

Ferrous sulfide (FeS) particles dispersed in the pores of carbon (FeS/PC) from the polyacrylonitrile carbonization were prepared via a facile one-pot solid-state method, which was extensively characterized by XRD, SEM, TEM, Raman spectrum, and XPS techniques. As an anode material for lithium-ion batteries, this FeS/PC composite can achieve a high initial discharge capacity of 1428.8 mAh/g at 0.1 C, and can maintain 624.9 mAh/g capacity after 150 cycles. The porous carbon accommodates the volume change during the cycling, and the special structure of the FeS/PC composite results in its advanced electrochemical performance by enhancing the structure stability. [ABSTRACT FROM AUTHOR]

The γ-LiFeO micro-cubes were synthesized using a simple solid-state method. Their electrochemical performance as anode material for lithium ion batteries was firstly investigated. Pure γ-LiFeO without nanosizing or carbon coating can deliver the first discharge capacity of 1055.3 mAh/g, and 611.5 mAh/g can be maintained after 50 cycles, around 80 % of the second discharge capacity. γ-LiFeO also demonstrates nice rate capabilities. These results indicate that γ-LiFeO is a promising anode material candidate for lithium ion batteries. The charge/discharge mechanism was also investigated. [ABSTRACT FROM AUTHOR]

The FeSSe particles dispersed in the pores of carbon (FeSSe/PC) were prepared using a simple one-pot solid-state method, which were then characterized by XRD, SEM, TEM, XPS, and Raman spectrum techniques. As the anode material for lithium-ion batteries, FeSSe/PC displays an initial discharge capacity as high as 699.5 mAh/g at 0.1 C, and 327.9 mAh/g can be maintained after 200 cycles, much enhanced than those of pure FeSSe. The small particles of FeSSe wrapped in carbon can effectively buffer the volume expansion during charging/discharging to improve the electrochemical performance. [ABSTRACT FROM AUTHOR]