Search

The increasing demand for radiation detection in many applications has led to demanding requirements for scintillators. Realizing low‐dose, pollution‐free, and reliable X‐ray detection has become a key technical challenge. Here, a triplet‐enhanced lanthanide radioluminescence (RL) material Ga3+/Tb3+ metallacrowns (Tb‐1) is reported. This Tb‐1 crystal emits bright green luminescence under ultraviolet light or X‐ray excitation, and the emission intensity is 286 and 242 times that of Tb3+ in inorganic salt, respectively. Tb‐1 crystal is further passivated by trioctylphosphine oxide (TOPO), and the enhanced RL intensity is equivalent to that of commercial Tl‐doped cesium iodide scintillator. In addition, RL of Tb‐1–TOPO has an extremely narrow full width at half maximum and an excellent linear response to the X‐ray dose rate. The detection limit is calculated to be 0.146 μGy s−1, which is 38 times lower than typical medical imaging doses. Triplet‐enhanced lanthanide RL provides new ideas for replacing scintillators that require high temperature synthesis processes such as inorganic phosphors and ceramics, and provides a new alternative scintillator material for flexible X‐ray monitoring, bioimaging, radiotherapy, and other applications. [ABSTRACT FROM AUTHOR]

The low-energy ultraviolet or visible photons can be produced by the interaction between the scintillator materials and ionizing radiation. For this reason, scintillator materials are widely used as radiation detectors, which are prevalently utilized in different applications such as nuclear medicine imaging, homeland security, high-energy physics, oil drilling explorations, etc. Herein, a high-atomic-number (Z) zirconium-based metal-organic framework nanoflower material CJLU-1 (Zr 6 (μ 3 -O) 4 (μ 3 -OH) 4 (OH) 6 (TCA) 2 (H 2 O) 6) (H 3 TCA = tri-carboxylic acids 4,4′,4″-nitrilotribenzoic acid) was synthesized and can effectively convert X-ray into visible light. CJLU-1 is composed of secondary structural unit hexagonal Zr metal cluster and connected by TCA ligands. The photo luminescence spectra (PL) emission peak and excitation peak of CJLU-1 are at 470 nm and 395 nm respectively. CJLU-1 exhibited radioluminescence (RL) peak with a maximum at 480 nm under steady-state excitation with X-rays. Moreover, by accommodating different guest molecules such as xylene and RhB in the same MOF material, intensity-tunable X-ray scintillation can be facilely achieved, providing a new class of scintillating materials with luminescence intensity tunability. The high-Z hexagonal Zr clusters, which are arranged in an orderly fashion, absorb and interact with the ionizing radiation and sensitize the adjacent organic ligands TCA to produce efficient RL. This work contributes to the development of high-Z zirconium-based MOFs and RL intensity-tunable scintillation materials towards future practical nuclear sensing applications. A high-atomic-number (Z) zirconium-based metal-organic framework nanoflower material CJLU-1 was synthesized and can effectively convert X-ray into visible light. [Display omitted] • A zirconium-based MOF was constructed and realized tunable radioluminescence upon accommodation of guest molecules. [ABSTRACT FROM AUTHOR]

The development of multifunctional nanocrystals has attracted growing interest lately in the biological and medical sciences. Herein, the dual-mode luminescence properties and optical thermometric performances of Tm3+, Yb3+: Gd 2 Zr 2 O 7 nanocrystals synthesized by a facile hydrothermal method are investigated systematically. Upon 980 nm excitation, the upconversion (UC) luminescence spectra of the obtained samples consist of blue (485 nm), red (655 and 681 nm), and near-infrared (785 nm) emission bands of Tm3+ ions. Diversely, the X-ray excited luminescence (XEL) spectra contain a strong ultraviolet (UV) emission from Gd3+ ions (314 nm), a weak defect-related emission band (400–600 nm), and several tiny emissions from Tm3+ ions. To realize the optical thermometry in the biological window, the luminescence intensity ratio (LIR) between 3F 2,3 → 3H 6 (681 nm) and 1G 4 →3F 4 (655 nm) transitions is employed for temperature sensing, giving high absolute and relative sensing sensitivities (S a-max = ∼1064 × 10−4 K−1, S r-max = ∼2.32%K−1). Therefore, the present Tm3+, Yb3+: Gd 2 Zr 2 O 7 nanocrystals could be useful in optical thermometry, photodynamic therapy, and X-ray imaging. • Dual-mode luminescence and thermometric properties of Tm3+/Yb3+: Gd 2 Zr 2 O 7 are studied. • UCL spectra consist of blue, red and NIR emissions of Tm3+ upon 980 nm excitation. • UV emission from Gd3+ is predominant under X-ray excitation. • LIR of 681 nm–655 nm shows high sensing sensitivity with S r-max of 2.32% K−1. • Tm3+/Yb3+: Gd 2 Zr 2 O 7 could be used for optical thermometry and photodynamic therapy. [ABSTRACT FROM AUTHOR]

A novel NIR emitting scintillator with 825 nm was developed by doping Sm2+ in Cs 4 Eu(Br,I) 6 crystal. The single crystals of Cs 4 Eu(Br,I) 6 :Sm were successfully grown by the Bridgman method. The crystal structure and valence state was approved by XRD and XPS methods. The luminescence properties and energy transfer were systematically investigated. The energy transfer mechanism is variable for different Sm2+ concentration. The PL decay profiles show that the Sm2+-related emission has fast decay of nanosecond. The proportion of fast decay can be tunable by adjusting Sm2+ doped concentration. The Sm2+ doped europium -host material will have a potential application for unclear detection as near-infrared (NIR) scintillators. • The novel NIR emitting Cs 4 Eu(Br,I) 6 :Sm scintillation crystals were successfully grown by the Bridgman method and the luminescence properties is tunable. • The proportion of nonradiative energy transfer from Eu2+ to Sm2+ was improved and the PLQY of Sm2+-related is up to 42.1%. • The fast decay time component of Sm2+ (50 ns) is up to 31.8% for Cs 4 Eu(Br,I) 6 : 3 mol%Sm crystal. • The proposed Sm2+ doped europium -host material principle is an effective method to develop near-infrared (NIR) scintillators for nuclear radiation detection. [ABSTRACT FROM AUTHOR]