Search

In this paper, we propose a highly sensitive temperature sensor based on two cascaded Mach–Zehnder interferometers (MZIs) that work using the Vernier effect. The all-fiber MZIs were assembled by splicing a segment of capillary hollow-core fiber (CHCF) between two sections of multimode fibers (MMFs). This cascaded configuration exhibits a temperature sensitivity of 1.964 nm/°C in a range from 10 to 70 °C, which is ~67.03 times higher than the sensitivity of the single MZI. Moreover, this device exhibits a high-temperature resolution of 0.0153 °C. A numerical analysis was carried out to estimate the devices’ temperature sensitivity and calculate the magnification of the sensitivity produced by the Vernier effect. The numerical results have an excellent agreement with the experimental results and provide a better insight into the working principle of the MZI devices. The sensor’s performance, small size, and easy fabrication make us believe that it is an attractive candidate for temperature measurement in biological applications.

• Simple fabrication of a MZI using a capillary hollow core fiber. • Low insertions loss and high signal contrast. • Narrow linewidth (around 0.03 nm). • High SMSR (53 dB) and high SNR (66). • The output of the laser exhibits low power fluctuations (0.1379 dB) and practically no wavelength variations (0.0108 nm). In this paper, a narrow spectral linewidth and wavelength-tunable erbium-doped fiber laser based on a Mach-Zehnder interferometer (MZI) as a filter is proposed and experimentally demonstrated. The filter is fabricated by splicing a short length of capillary hollow-core fiber (CHCF) between two small sections of multimode fibers (MMF). The interference pattern generated by the filter has a free spectral range of 10.5 nm and a maximum extinction ratio of 36 dB at 1560 nm. Then, by incorporating the filter inside a ring cavity laser, a single laser emission centered at 1566.46 nm with a spectral width around 0.03 nm and a high SNR of 66 dB (also has a SMSR of 53 dB) is obtained. By changing the temperature of the filter, the wavelength emission of the laser can be tuned from 1566.46 to 1570.09 nm. Considering that the fabrication process of the filter is relatively simple and can be easily implemented in an EDFL, we strongly believe that it can have a great deal of interest in telecom applications. [ABSTRACT FROM AUTHOR]

In this paper, we propose a highly sensitive temperature sensor based on two cascaded Mach–Zehnder interferometers (MZIs) that work using the Vernier effect. The all-fiber MZIs were assembled by splicing a segment of capillary hollow-core fiber (CHCF) between two sections of multimode fibers (MMFs). This cascaded configuration exhibits a temperature sensitivity of 1.964 nm/°C in a range from 10 to 70 °C, which is ~67.03 times higher than the sensitivity of the single MZI. Moreover, this device exhibits a high-temperature resolution of 0.0153 °C. A numerical analysis was carried out to estimate the devices' temperature sensitivity and calculate the magnification of the sensitivity produced by the Vernier effect. The numerical results have an excellent agreement with the experimental results and provide a better insight into the working principle of the MZI devices. The sensor's performance, small size, and easy fabrication make us believe that it is an attractive candidate for temperature measurement in biological applications. [ABSTRACT FROM AUTHOR]