Search

Characterization of spin-orbit torques (SOTs) in the perpendicular magnetic anisotropy (PMA) system is of great importance for fundamental studies and technological applications in spintronic devices. Here, we report a spin Hall magnetoresistance (SMR) based spin-torque ferromagnetic resonance (ST FMR) study of SOT efficiency in perpendicularly magnetized $\mathrm{W}$/${\mathrm{Co}}_{40}{\mathrm{Fe}}_{40}{\mathrm{B}}_{20}$/$\mathrm{Mg}\mathrm{O}$ structures. A full analysis of the ST FMR spectrum is developed for the PMA sample. A typical ST FMR spectrum of the PMA system shows two resonance modes, i.e., in-plane and out-of-plane magnetization precession modes. By performing modulation of the damping measurement for the in-plane mode, the dampinglike torque efficiency is determined to be \ensuremath{-}0.38, which is consistent with the reference value obtained in samples with in-plane magnetic anisotropy. The dampinglike torque efficiency of \ensuremath{-}0.31 is also obtained from the out-of-plane resonance mode, in which the significant contribution of the spin-pumping-induced inverse spin Hall effect is carefully considered. The obtained values of dampinglike torque efficiency by different means are consistent with each other. The present work provides useful insights to determine the dampinglike torque efficiency of the PMA sample via ST FMR measurements.

Current-induced spin–orbit torques (SOTs) in heavy metal/ferromagnet heterostructures have emerged as an efficient method for magnetization switching with applications in nonvolatile magnetic memory and logic devices. However, experimental realization of SOT switching of perpendicular magnetization requires an additional inversion symmetry breaking, calling for modifications of the conventional SOT heterostructures. In this work, we study SOTs and deterministic switching of perpendicular magnetization by inserting different asymmetric dusting layers at the heavy metal/ferromagnet interface. Similar to the previous works with lateral structural asymmetry, we study the emergence of current-induced perpendicular effective magnetic fields (Hzeff). By examining three different material combinations of heavy metal/dusting layers (W/IrMn, Pt/IrMn, and W/Ta), we shed light on the origins of Hzeff; we show that Hzeff is generically created in all the studied asymmetric structures, has a close correlation with the interfacial magnetic anisotropy, and is independent of the signs of spin Hall angles of the materials. Furthermore, we show that the induction of Hzeff enables field-free deterministic SOT switching of perpendicular magnetization. Our results can be used in designing SOT heterostructures for practical applications in nonvolatile technologies.

Spin orbit torque-driven magnetization switching in perpendicularly magnetized thin film relies on an extra in-plane magnetic field to break the in-plane magnetic symmetry, which is an obstacle for the integration of spin–orbit torque-based spintronic devices. Here, we propose a simple method to realize the field-free spin–orbit torque-driven magnetization switching by exploiting a tilted magnetic anisotropy, which is caused by the direct coupling of two ferromagnetic layers in the Pt/Co/FeNi/Ta structure. When preparing the sample, a 1000 Oe in-plane magnetic field was applied to ensure the magnetic moment deviating a small angle from the out-of-plane direction to this in-plane field direction. We experimentally demonstrate the deterministic field-free magnetization switching in Pt/Co/FeNi/Ta by the field-like spin–orbit torques when the electric current is applied perpendicular to this in-plane field direction. The switching performance is slightly degraded with the critical switching current density and thermal stability factor, respectively, reaching 6.4 × 106 A/cm2 and 25 due to the slightly decreased spin–orbit torque efficiency and perpendicular magnetic anisotropy with introducing the FeNi layers. Our work paves the way for realizing the field-free magnetization switching by spin–orbit torques.

Electric-field manipulation of magnetic order has proved of both fundamental and technological importance in spintronic devices. So far, electric-field control of ferromagnetism, magnetization and magnetic anisotropy has been explored in various magnetic materials, but the efficient electric-field control of spin-orbit torque (SOT) still remains elusive. Here, we report the effective electric-field control of a giant SOT in a Cr-doped topological insulator (TI) thin film using a top-gate FET structure. The SOT strength can be modulated by a factor of 4 within the accessible gate voltage range, and it shows strong correlation with the spin-polarized surface current in the film. Furthermore, we demonstrate the magnetization switching by scanning gate voltage with constant current and in-plane magnetic field applied in the film. The effective electric-field control of SOT and the giant spin-torque efficiency in Cr-doped TI may lead to the development of energy-efficient gate-controlled spin-torque devices compatible with modern field-effect semiconductor technologies., 22 pages, 4 figures

We theoretically study equilibrium and dynamic properties of nanosized magnetic skyrmions in thin magnetic films with broken inversion symmetry, where electric field couples to magnetization via spin-orbit coupling. Based on a symmetry-based phenomenology and micromagnetic simulations we show that this electric-field coupling, via renormalizing the micromagnetic energy, modifies the equilibrium properties of the skyrmion. This change, in turn, results in a significant alteration of the current-induced skyrmion motion. Particularly, speed and direction of the skyrmion can be manipulated by designing a desired energy landscape electrically, which we describe within Thiele's analytical model and demonstrate in micromagnetic simulations including electric-field-controlled magnetic anisotropy. We additionally use this electric-field control to construct gates for controlling skyrmion motion exhibiting a transistor-like and multiplexer-like function. The proposed electric-field effect can thus provide a low energy electrical knob to extend the reach of information processing with skyrmions., Comment: 9 pages, 7 figures

Compared with current-controlled magnetization switching in a perpendicular magnetic tunnel junction (MTJ), electric field- or voltage-induced magnetization switching reduces the writing energy of the memory cell, which also results in increased memory density. In this work, an ultra-thin PZT film with high dielectric constant was integrated into the tunneling oxide layer to enhance the voltage-controlled magnetic anisotropy (VCMA) effect. The growth of MTJ stacks with an MgO/PZT/MgO tunnel barrier was performed using a combination of sputtering and atomic layer deposition techniques. The fabricated MTJs with the MgO/PZT/MgO barrier demonstrate a VCMA coefficient, which is ∼40% higher (19.8 ± 1.3 fJ/V m) than the control sample MTJs with an MgO barrier (14.3 ± 2.7 fJ/V m). The MTJs with the MgO/PZT/MgO barrier also possess a sizeable tunneling magnetoresistance (TMR) of more than 50% at room temperature, comparable to the control MTJs with an MgO barrier. The TMR and enhanced VCMA effect demonstrated si...