Search

Waste Nd–Fe–B sintered magnets (grade 33H) were recycled to manufacture anisotropic sintered magnets by adding Ce-rich alloys. The influences of additive amounts of Ce-rich alloys on the microstructure and magnetic properties of the recycled sintered magnets were investigated. It showed that the recycled sintered Nd–Fe–B magnet without Ce-rich alloy addition has rather lower density; the density of the magnet is slightly raised with increased sintering temperature, but the recycled magnet is prone to oxidation, even cracking. For recycled sintered magnets with Ce-rich alloy addition, the densities of the magnets are upgraded with increasing amounts of Ce-rich alloy, and the magnetic properties are obviously improved. This suggests that Ce-rich alloy plays the important role of sintering-aid in the densification of the recycled magnet. However, the coercivity ( $H_{{\text {cj}}} ) of the recycled magnets is decreased, when the additive amounts of Ce-rich alloy are over 8 wt.%. This is probably because excessive Ce-rich alloy addition can cause RE-rich phase aggregation at the triple grain boundary junctions, and deteriorate the microstructure of the recycled magnets. The recycled magnet with 5 wt.% Ce-rich alloy, sintered at 1080 °C, exhibits the following optimal magnetic properties: Br of 11.67 kGs; H{\text {cj}} of 18.94 kOe; and maximum energy product [(BH)\max ] of 33.1 MGOe. The magnetic properties of the recycled magnets are comparative to those of the waste magnets. Recycled magnets have a higher coercivity and perfect squareness of demagnetization curve ( Hk/H{\text {cj}} =0.972 ). [ABSTRACT FROM AUTHOR]

Half-Cr-doped YMnO 3 single crystal films have been grown on YAlO 3 substrates with various compressive strains by using magneto sputtering and ex-situ annealing process. We report on effects of the compressive strain on their multiferroic properties. Anisotropic polarization shows a monotonous dependence on the compressive strain along the corresponding crystal axis. Furthermore, relative ratio between the remanent magnetic moments along the a - and c -axes is found to be strongly related to the lattice parameter c . These results are ascribed to the modification of magnetic structure under various compressive strains, i.e. , the compressive strains along the a- and c -axes predominantly stabilize the E -type antiferromagnetic and bc -cycloidal phases, respectively. [ABSTRACT FROM AUTHOR]