Search

This article proposes a novel method of improving the overall coupling coefficient of a wireless power transfer system by using a four‐winding transformer of which two pairs of windings each are connected in parallel in the primary side and secondary side. By weakening the coupling coefficients kc between the parallel windings, the overall magnetic coupling between the primary side and secondary side of the transformer is improved. In order to confirm the validity of the proposed method, a conventional high‐kc four‐winding transmission coil and the proposed low‐kc four‐winding transmission coil are experimentally assessed. Then, the coils are introduced into a nonresonant inductive power transfer system utilizing a dual active bridge converter in order to confirm the correction of the input power factor. As a result, the overall magnetic coupling of the proposed four‐winding coils was found to be improved by 17% compared with the overall magnetic coupling of the conventional coil. Moreover, the input power factor for the entire load is corrected with the proposed four‐winding coil. Therefore, a low kc is effective in improving the overall magnetic coupling. [ABSTRACT FROM AUTHOR]

SUMMARY This paper provides a fundamental analysis of a power supply and rectifiers for wireless power transfer using magnetic resonant coupling (MRC). MRC enables efficient wireless power transfer over middle-range transfer distances. MRC for wireless power transfer should operate at a high frequency in the industry science medical band, such as 13.56 MHz, because the size of the transfer device decreases at higher transfer frequencies. Therefore, the output frequency of the power supply on the transmitting side should be 13.56 MHz. In addition, the rectifier on the receiving side is operated at a high frequency. This paper focuses on the reflected power in the power supply and rectifiers. Thus, the parametric design method is clarified for the power supply, including a low-pass filter to match the output, the impedance of the power supply with the characteristic impedance of the transmission line. In addition, the effects on the rectifiers of silicon carbide and gallium nitride diodes are confirmed by performing an experiment and a loss analysis. [ABSTRACT FROM AUTHOR]