Search

An improved X-band coaxial transit time oscillator is proposed in this paper. First, the device uses a non-uniform three-gap modulation cavity to improve the clustering of electron beams under a low magnetic field and to increase the depth of the fundamental current modulation. The operating mode of the modulation cavity is the 2π/3 mode of TM01. Second, the dual-cavity extraction structure works in π mode, which can continuously and intensively extract the electron beam energy. The physical characteristics of the device are studied through simulation and experiment. The experimental results indicate that the high power microwave with a frequency of 8.38 GHz and a power of 1.78 GW is generated when the diode voltage is 520 kV and the guiding magnetic field is 0.65 T, yielding a pulse width of 27 ns and an efficiency of 32%. [ABSTRACT FROM AUTHOR]

In recent years, high-power microwave (HPM) generator with a low working magnetic field has caught more attention as this device has the merit of low energy consumption and the potential of using a permanent magnet package in the HPM system. However, the conversion efficiency of this device is generally low because the electron beam will fluctuate transversely and the modulation depth will decline when the guiding magnetic field is low. To obtain concurrently high-power, high-efficiency, and low operating magnetic field, a transit-time oscillator (TTO) with two bunchers is designed and fabricated. Two bunchers are adopted in the TTO to modulate the electron beam twice. By introducing the second buncher, the modulation depth of the electron beam increases by 23%, and the conversion efficiency increases from 25% to 40.5% in simulations. A microwave with a power of 3.65 GW and a frequency of 4.31 GHz is obtained with a 600-kV, 15-kA electron beam under the guidance of a 0.5-T magnetic field in simulations. Furthermore, the corresponding experiments are carried out to verify the two-buncher TTO, and a microwave with a power of 3.3 GW and a frequency of 4.31 GHz is obtained. The experimental efficiency is 32% with an external magnetic field of 0.48 T. [ABSTRACT FROM AUTHOR]

The energy consumption of high-power microwave sources has attracted much attention in the research field of high-power microwaves. One way of decreasing the energy consumption is to reduce the guiding magnetic field. In this work, a high-efficiency transit-time oscillator is proposed with a low guiding magnetic field. In order to enhance the modulation depth of electrons and increase the conversion efficiency under a low guiding magnetic field, two bunchers are adopted to modulate the electron beam. 2.5D simulation results show that the proposed device generates microwaves with a power of 3.6 GW and a frequency of 4.31 GHz. The power conversion efficiency is 40% and the modulation depth is 125% when the guiding magnetic field is only 0.5 T. In addition, a 3D simulation verifies the results. [ABSTRACT FROM AUTHOR]

Frequency hopping is one of the most significant technological advancements in high power microwave (HPM) sources. Mechanical alteration is generally adopted in traditional cross-band microwave generation, but it has the detriments of a complex adjustment strategy. In this paper, a cross-band frequency hopping Cerenkov microwave generator with an advantageous adjustment strategy, high beam–wave interaction efficiency, and pure output mode is developed. Two-segment slow wave structures (SWSs), which work in C and X-bands separately, are adopted. Additionally, by utilizing the cyclotron resonance absorption phenomenon reasonably, only the relative band microwave is energized under different magnetic fields, which adequately represses mode competition and realizes cross-band frequency hopping. After the electron beam passes through the first SWS section, the bunching center is consistently at the acceleration or deceleration phase of the subsequent SWS section, which a guarantees high beam–wave interaction efficiency in the two bands. The preliminary results of the particle-in-cell (PIC) simulation are as follows: when the guiding magnetic field is 0.7 T, the microwave output comprising only the X-band is obtained, with an efficiency of 42%; when the guiding magnetic field is 1.5 T, the microwave output comprising only the C-band is obtained, with an efficiency of 30%. [ABSTRACT FROM AUTHOR]