Search

The paper focuses on the vacuum arc commutating characteristic which is a common basic problem in resistive fault current limiters. The current commutating characteristic of the current can be diverted into the current limiting resistor from the vacuum circuit breaker is mainly researched. The influence of the current amplitude, the current limiting resistor resistance, the arcing time, the transverse magnetic field and the current frequency on the time of the current commutation and the current in the moment of the completion transition is investigated and analyzed. According to the experimental results, the mathematical description of the vacuum arc commutating characteristic is obtained. The interaction between the vacuum arc and the transverse magnetic field is discussed. The paper provides the foundation for the structure and parameters optimization of the resistive fault current limiter. [ABSTRACT FROM AUTHOR]

In order to reveal the mechanism of the residual magnetic field in vacuum interrupters (VIs), the vacuum arcs and the postarc characteristic with external AMF at current zero are investigated. The magnetic field of the 10-kV/20-kA VIs is analyzed. And then, the phase shift and the residual AMF are obtained. The test platform is established in the synthetic test circuit. The pulsed AMF is applied at current zero with the pulsewidth of 4 ms, and the magnitude can be adjusted from 0 to 200 mT. The transparency VIs with external AMF at current zero is observed by the high-speed CMOS camera to analyse the vacuum arcs development. The postarc current and transient recovery voltage are measured by the postarc current measuring equipment and the voltage divider so that the postarc characteristic such as postarc current and postarc charge can be obtained. The influence of the pulsed AMF at current zero on the vacuum arc development and postarc characteristic is gained and the mechanism of the AMF at current zero is analyzed, which can be useful to special AMF contact design for different applications. [ABSTRACT FROM AUTHOR]

This paper focuses on the vacuum arc commutation between the vacuum arc and the parallel-connected insulated gate bipolar transistor (IGBTs) of dc microgrid hybrid circuit breakers (HCBs). The principle of the dc HCB is analyzed and the vacuum arc commutation is the important process in dc HCB interruption, in which the arcing time and the interrupting time are depended. The test circuit of the vacuum arc commutation is established by simplifying the parallel-connected IGBTs to an on-state resistance with large thermal capacity. The influence of the magnitude of the main current, the resistance of the IGBTs, and the externally applied transverse magnetic field (TMF) on the vacuum arc commutation is investigated by the electrical measure and the development of vacuum arc which is observed by a high-speed CMOS camera. The criteria of the vacuum arc commutation are obtained. The interaction between the vacuum arc commutation and the externally applied TMF is researched and the optimal magnitude of the TMF is gained. The vacuum arc commutation characteristics of dc HCB can be useful for parameters design and control strategy. [ABSTRACT FROM PUBLISHER]

The paper proposes a novel post-arc current measuring equipment (PACME), which is composed of vacuum switch, transfer resistance, protective gap and high-precision current sensor. The principle of the measurement is based on current transfer characteristic between the vacuum switch and transfer resistance. The current-transfer model of the post-arc current measurement is established to gain the characteristic of vacuum arc conductance and the completion time of current transfer influenced by the transfer resistance, current of main circuit and the contacts opening time. The vacuum arc of PACME extinguished just before the main current approach zero while the main current is completely transferred to the transfer resistance. According to the simulation result, the PACME is designed, especially; the transfer resistance is non inductive and over current protection. The post-arc current of vacuum switch with axial magnetic field (AMF) and transverse magnetic field (TMF) contacts was measured in synthetic short-circuit test. The measuring result of post-arc current is accurate and small interference, which satisfied the post-arc current measurement of vacuum circuit breakers. [ABSTRACT FROM AUTHOR]

This paper investigates the influence of the axial magnetic field (AMF) arc control on voltage distribution (VD) of double-break vacuum circuit breakers (VCBs) in order to gain balanced VD, and thus enhance the breaking capacity. The interaction of vacuum arc plasma, postarc current (PAC), and AMF is discussed. We conduct the breaking test of double-break VCBs with externally applied AMF of a different pulsewidth, magnitude, and a different moment. The PAC, postarc charge, and the VD are measured to analyze the relationship between the AMF arc control and the VD. The optimal AMF arc control and the relationship between the AMF magnitude and the unbalanced voltage ratio are gained when the grading capacitors were 400 pF. The experimental test showed that the proper AMF arc control can improve the unbalanced VD. The mechanism is that the proper AMF arc control can make the postarc charge small and stable, so the unbalanced postarc charge, which caused the unbalanced VD is limited. [ABSTRACT FROM AUTHOR]

In order to find the synergy of double-break vacuum circuit breakers (VCBs), we conducted a synthetic test including different vacuum gaps, different type electrodes, and different grading capacitors. The double-break VCBs are composed of Axial Magnetic Field (AMF) and Transverse Magnetic Field (TMF) contact VCBs, which can constitute four combinations. The optimal combination of AMF and TMF type electrodes was obtained by comparing with the breaking capacity and voltage distribution of the four combinations. The breaking capacity of double-break VCB with AMF and TMF type electrodes in series while the AMF interrupter is on the lower side is largest because the voltage distribution is the most even which is caused by the different equivalent capacitances of different interrupters. The optimal matching vacuum gaps of the best combination were obtained by a synthetic test of different vacuum gaps, which may make the grading capacitors of double-break VCBs small, even obsolete. The combination of maximum breaking capacity was series AMF type interrupters with suitable grading capacitors of 500–2000 pF. The experimental results provide the best combination and matching control mode for VCBs with double-break. [ABSTRACT FROM PUBLISHER]