Search

The prepulse current is an effective way to optimize the load structure and improve the implosion quality of the Z-pinch plasma. Investigating the strong coupling between the preconditioned plasma and pulsed magnetic field is essential for the design and improvement of prepulse current. In this study, the mechanism of the prepulse current on the Z-pinch plasma was revealed by determining the two-dimensional magnetic field distribution of preconditioned and nonpreconditioned single-wire Z-pinch plasma with a high-sensitivity Faraday rotation diagnosis. When the wire was nonpreconditioned, the current path was consistent with the plasma boundary. When the wire was preconditioned, the distributions of current and mass density presented good imploding axial uniformity, and the imploding speed of the current shell was higher than that of the mass shell. In addition, the mechanism of the prepulse current suppressing the magneto-Rayleigh-Taylor instability was revealed, which formed a sharp density profile of the imploding plasma and slowed the shock wave driven by the magnetic pressure. This discovery is essential and instructive for the design of preconditioned wire-array Z-pinch experiments.

Measurement of plasma parameters during the ablation phase in the Z-pinch is crucial for investigating the dynamic behaviors. In this study, optical Thomson scattering was employed to measure the temperature and velocity of the ablation plasma in a double-wire Z-pinch. The scattering spectra profiles were fitted using a model that considered the velocity distribution. The experimental results revealed the energy evolution of ablation plasma, the establishment of the global magnetic field and the development of axial non-uniformities. The precursor plasma was found to play a key role in strengthening the global magnetic field. A resistive layer near the wire core with a size of 1.5 mm was observed in the ablation plasma after the precursor plasma column formed. The plasma underwent rapid heating in this layer, the electron temperature rises from 17 eV to 22 eV. Upon leaving this layer, electron the temperature is stable at around 22 eV. The radial distribution of the ablation rate increases and decreases, indicating the axial motion of the ablation plasma, which could be caused by the tilt motion of the stream and the secondary modulation of the natural wavelength. [ABSTRACT FROM AUTHOR]

The radiation properties including size, intensity, and pulse width of the double-wire X-pinch were optimized using prepulse current. The optimization mechanism was investigated using optical diagnostics. The X-pinch driven by a current with a peak intensity of ∼250 kA and a rise rate of 0.95 kA/ns was difficult to produce strong radiation. The application of prepulse effectively enhances the current rise rate and intensity of the radiation source. The radiation source also exhibited reduced spatial dimensions and radiation duration, thereby improving spatial and temporal resolution while used in x-ray projection shadow radiography. The magnetic field and current distribution were measured using Faraday rotation. During the early stage, the current predominantly flows in the corona plasma at a larger radius generated by the prepulse current, consequently reducing the load inductance. As the time delay between the main and prepulse current increased, the intensity of the radiation source further increased. This study provides an approach for controlling radiation sources and enables different applications of X-pinches with adjustable prepulse current. [ABSTRACT FROM AUTHOR]

Measurement of the magnetic field distribution in Z-pinch experiments remains an ongoing challenge. We present a method of measuring the radial distribution of the magnetic field around a copper rod using Zeeman splitting of sodium (Na) emission lines, in which an Na layer is formed by the laser ablation of NaCl crystals on a load surface. The load consists of a copper rod of 2 mm diameter and is pre-covered on its surface by the NaCl crystals. An 8 ns pulsed laser with an energy of 1 J and wavelength of 532 nm is focused on the crystals. The Na plasma is produced and expands from the surface of the copper rod into a vacuum. After applying a pulsed current with a peak value of 375 kA to the load, the Na 3s–3p doublet displays significant Zeeman splitting patterns. The self-luminosity of the Na plasma is recorded by a spectrometer coupled with an intensified charge-coupled device camera from an end-on view to eliminate the effects of different observing angles and Doppler shifts. We determine the magnetic field by fitting the measured spectra with the calculated results of the Voigt profile. The measurable range of radial position is 5–7 mm, and the corresponding magnetic field is 5–15 T. The averaged error of curve fitting is less than 12%. [ABSTRACT FROM AUTHOR]

The formation of precursor plasma and ablation dynamics of Al thin liner explosion are investigated in this manuscript. The size of 12 mm in diameter, 10 μm in thickness Al liners are exploded on the Qin-1 facility (about 450 ns, 450 kA). An axial laser shadowgraphy and interferometry platform is set up to observe the plasma dynamics inside the liner. To solve the problem that the inside plasma density of the liner cannot be absolutely calibrated due to the lack of a zero plasma density area, we have established a CW laser interference system using a streak camera which can trace the interference lines over time. Low-density (10−7−10−6 g cm−3) precursor plasma is generated from the interior wall and flows towards the center with a velocity of about 150–200 km s−1, thus forming a column with high electron density by accumulation. Simultaneously, a high-density plasma layer flows toward the center at about 10 km s−1. The electron density of the central plasma column rises up rapidly after the precursor reaches the center and achieves 2.5 × 1018 cm−3 at 280 ns after the current starts. To fully understand the process, we have used the resistive magnetohydrodynamic code FLASH to realize a simulation to study interior precursor dynamics. We compared these simulation results with our experiments. Finally, we measured the voltage for the whole process and derived the inductance change and effective current radius. We compared the simulated current density distribution with the experimental result which proves that a considerable amount of current flows through the center plasma column, making the effective radius of current become smaller over time. [ABSTRACT FROM AUTHOR]