Search

Herein, four kinds of initial Goss textures with different deviation angles (0°, 5°, 10°, and 15°) are obtained by controlling the included angles between the longitudinal directions of rectangular cutting specimens and the initial rolling direction of the raw material. Then, 0.05 mm thick grain‐oriented silicon steels are fabricated by cold rolling and primary recrystallization annealing. Effects of initial textures on the microstructure and texture evolutions and magnetic properties are investigated in detail. Compared with sharp {111}<112> in the cold rolling sheet with initial exact Goss, the deviated Goss favors the formation of strong {111}<112> + weak {h11}<1/h 1 2> textures. After annealing, sharp {210}<001> + medium {110}<001> textures develop as a result of the small initial deviation, while larger initial deviations contribute to the {310}<001> texture. In addition, the average grain sizes are also related to recrystallization textures. Consequently, the distinct recrystallization microstructures and textures result in the differences of magnetic properties. [ABSTRACT FROM AUTHOR]

• Low-finishing-temperature hot rolling and batch annealing result in large grains. • Prior large grains lead to desirable recrystallization microstructure and texture. • A potential processing method to improve magnetic properties is proposed. The grain size prior to cold rolling plays an important role in the microstructural, textural evolution and magnetic properties of non-oriented silicon steel sheets. In this work, we proposed a new way to obtain large grain size before cold rolling and applied it to a 1.0 wt% Si-0.2 wt% Al non-oriented silicon steel, i.e., appropriate low-finishing-temperature hot rolling combined with batch annealing. The grain growth process during batch annealing was investigated using a quasi in-situ electron backscattered diffraction (EBSD) technique. It was demonstrated that significant grain growth took place through a strain-induced boundary migration mechanism. Then a large number of in-grain shear bands were formed in the cold rolled microstructure and could provide nucleation sites for Goss ({1 1 0} 〈0 0 1〉) and λ-fiber (〈0 0 1〉//ND) recrystallized grains, thus resulting in a coarse-grained and homogeneous recrystallization microstructure with weakened γ-fiber (〈1 1 1〉//ND) texture, strengthened Goss and λ-fiber texture. Consequently, superior magnetic properties (B 50 = 1.763 T, P 1.5/50 = 4.30 W/kg) were obtained. For comparison, the conventional processing route without batch annealing was also investigated. A small-grained and inhomogeneous recrystallization microstructure with pronounced γ-fiber texture was produced in the finally annealed sheet, which could significantly deteriorate both the magnetic induction and iron loss. This work provided a new way to enlarge the grains in hot rolled sheets by low temperature batch annealing instead of the conventional high temperature normalization. Thus a new processing route to fabricate low silicon non-oriented electrical steels with high permeability and low iron loss was established. [ABSTRACT FROM AUTHOR]

Secondary recrystallization is responsible for the sharp Goss texture ({110}<001>) of grain-oriented electrical steels. Many investigations have focused on establishing the relations between the sharpness of final Goss textures and primary recrystallization textures measured by the X-ray diffraction. However, the contributions of micro-texture characteristics to secondary recrystallization have not yet been well understood. Here, we report that the grain colonies composed of grains with similar orientations in the primary recrystallization matrix had a particular role on the development of secondary recrystallization via an original tracking experiment. We observe that the γ-grain (<111>//normal direction, ND) colonies facilitate the retention of primary recrystallization matrix grains (≤25µm) having 20-45° disorientation with {110}<001> and relatively large difference in the associated frequency with precise Goss orientation and that having deviation angle of 15°, promoting the abnormal growth of low-deviation-angle Goss grains especially after the onset of secondary recrystallization and leading to sharp final Goss texture. By contrast, the abnormal growth of high-deviation-angle Goss grains may be also promoted after the initiation of secondary recrystallization in case of randomly-distributed γ-grains in primary recrystallization matrix and thus resulted in deteriorated magnetic properties. In this way, we reveal the role of grain colony on secondary recrystallization and the underlying mechanism for the effect of primary recrystallization textures on the sharpness of final Goss texture. We also observe that the formation of grain colonies is mainly related to the initial solidification microstructure, processing route as well as the deformation and recrystallization features of γ-grains. Image, graphical abstract [ABSTRACT FROM AUTHOR]

• Ultra-thin sheets were produced based on primary recrystallization. • Dependence of texture evolution on initial Goss orientation was clarified. • Different cold rolled and recrystallization textures evolved in Hi-B and CGO. • Mechanism of recrystallization of typical texture was investigated. • Relationships of iron loss upon grain size, texture and thickness were clarified. Based on cold rolling and primary recrystallization method, 0.05–0.15 mm-thick ultra-thin grain-oriented silicon steel sheets were successfully produced by utilizing the high induction (Hi-B) and common grain-oriented (CGO) silicon steels as raw materials, respectively. Thus, the effects of sharpness of initial Goss texture on the evolutions of microstructure, texture and magnetic property were investigated in detail. For Hi-B steel, 'smooth' microstructures were formed in the cold-rolled sheets, and the textures evolved along the following path: exact {1 1 0}〈0 0 1〉 → {2 3 0}〈0 0 1〉 → {1 1 1}〈1 1 2〉. By contrast, significant deformation bands or shear bands were observed in the CGO steel, and the textures developed along the following path: deviated {1 1 0}〈0 0 1〉 → {2 1 0}〈0 0 1〉 → {1 1 1}〈1 1 2〉. After annealing, inhomogeneous microstructures containing some clusters with large grains (∼2–4 mm) and fine equiaxed grains appeared in the Hi-B steel and the associated texture evolution with increasing cold rolling reduction followed the path: {1 1 0}〈0 0 1〉 → {2 3 0}〈0 0 1〉 → {2 1 0}〈0 0 1〉. Unlike the Hi-B steel, relatively fine and uniform equiaxed recrystallization grains were produced in the final CGO steel, and the texture evolved along the route: {2 1 0}〈0 0 1〉 → {6 1 0}〈0 0 1〉. Consequently, further research focusing on the recrystallization mechanism was studied. The results showed that {1 1 0}〈0 0 1〉 and {2 1 0}〈0 0 1〉 developed into the predominated components due to oriented growth and oriented nucleation respectively in the 0.05 mm-thick Hi-B sheet, while {1 0 0}〈0 0 1〉 became the main texture with the aid of oriented nucleation advantage in the CGO sheet. In addition, more attention was paid on the magnetic properties of the ultra-thin sheets, and the results showed that heavy cold rolling reduction as well as low annealing temperature contributed to better magnetic induction. Furthermore, the separated iron loss components were obtained to clarify the relationships between the iron loss and grain size, texture and thickness. [ABSTRACT FROM AUTHOR]

• Effect of two-stage cold rolling route on microstructure and texture was studied. • Low-reduction cold rolling and intermediate annealing resulted in coarse grains. • γ-Fiber was weakened while λ-fiber and Goss texture were enhanced in final sheet. • Increasing grain size prior to cold rolling led to improved magnetic properties. The 0.5 mm-thick Fe-0.9 wt%Si-0.3 wt%Al non-oriented electrical steel sheets were successfully produced with one-stage and two-stage cold rolling methods. The comparative investigations were conducted on the relationships between the processing routes, microstructures, textures and magnetic properties. This study mainly focused on how to increase the grain sizes prior to cold rolling and its influences on subsequent microstructure and texture evolution. The results showed that the fine microstructure prior to final cold rolling led to the pronounced γ-fiber texture, fine recrystallized grains and deteriorated magnetic properties after final annealing. Nevertheless, by introducing a low-reduction cold rolling and intermediate annealing, coarse grains could be generated prior to the final cold rolling. When the cold rolling reduction was 11%, a relatively homogeneous microstructure composed of fully coarse grains was produced. The increased grain sizes promoted the generation of dense shear bands during final cold rolling, which served as the nucleation sites for λ-grains and Goss grains. This resulted in the improved magnetic properties due to the weakened γ-fiber texture, strengthened λ-fiber texture and Goss texture and increased grain sizes in the final annealed sheets. This work provided a new way to improve the magnetic properties of non-oriented electrical steels by controlling the grain sizes prior to final cold rolling. [ABSTRACT FROM AUTHOR]