Search

In this paper, the ultrafine spherical FeSiAl soft magnetic composites were prepared by the particles coated with organosilane modified water-soluble silicone resin. The magnetic response of the sample fabricated with 15.36 μm particle is up to 358 MHz, and the real part of permeability exceeds 57. The P cv of this composite is just 604.85 kW/m3 and 606.44 kW/m3 at 200 kHz,100 mT and 1 MHz, 30 mT, respectively. In addition, the DC bias performance improved reaches to 61.3%, comparing to the sample fabricated by the large particles. The domain wall movement dominates the permeability when large particles are employed. However, the spin rotation plays a more important role in the case of small particles. Two stages with different loss mechanisms were investigated for different particle sizes. When the frequency exceeds 70 kHz, the declination of the insulating coating resistivity results in a loss jump, due to the space charge polarization. The FeSiAl crystalline termination at the grain boundary exhibits a symmetry break, thus resulting in a sharp local rise in the anisotropy field which provides a barrier to the domain wall motion and enhance the DC bias properties. This ultrafine FeSiAl composite shows great potential in the MHz magnetic power application. [Display omitted] • Spherical-FeSiAl soft magnetic composites were prepared. The magnetic response of the sample fabricated with 15.36 μm particle is up to 358 MHz. The P cv of this composite is just 604.85 kW/m3 and 606.44 kW/m3 at 200 kHz, 100 mT and 1 MHz, 30 mT, respectively. • It is found that the domain wall movement dominates the permeability when large particles are employed. However, the spin rotation plays a more important role in the case of small particles. • It also clarified a novel phenomenon that a sudden jump in loss curve at the frequency of near 70 kHz is observed for the short circuit of the insulating coating, due to the space charge polarization. • The electrochemical analysis demonstrates that this organosilane modified water-soluble silicone resin hybrid insulating layer can effective reduce the eddy current loss in high frequency. In this work, organosilane modified water-soluble silicone resin coated spherical-FeSiAl soft magnetic composites with different particle sizes were prepared, and the effects of the particle size on the permeability, magnetic loss, and DC bias were investigated. For large particles composite, multi-domain lead to the introduction of domain wall resonance, which restricts the permeability in low frequency. As the particle size decreases, the particles tend to be single domain particles resulting in a decrease of the domain wall resonance component and an enhancement of the spin rotation one. Two stages with different loss mechanisms were investigated and the sudden increase of the loss near 70 kHz is ascribed to the short circuit of the insulating coating in high frequency due to the space charge polarization. Furthermore, electrochemical analysis also demonstrates the insulation of this soft magnetic composite. This ultrafine FeSiAl composite may promote the development of MHz frequency semiconductor power devices. [ABSTRACT FROM AUTHOR]

A novel amorphous soft magnetic composites (ASMCs) for hundreds MHz frequency applications have been prepared under the hot-pressing molding by ultrafine submicron FeBP amorphous powders. These ultrafine submicron FeBP amorphous particles were synthesized with the NaBH 4 chemical reduction method and the particles size was regulated by the drop rate of the reducing agent. The morphology, microstructure, elemental composition and high-frequency magnetic properties of the amorphous soft magnetic composites was systematically investigated. The particle sizes of FeBP amorphous powders are distributed in 600–900 nm which gradually increase with the decrease of the drop rate of the NaBH 4 aqueous solution. Meanwhile, the Fe element content and saturation magnetization strength of the amorphous powder increase and the coercivity gradually decreases. The corresponded ASMCs also appear a commensurate permeability in the range of 6–9 responding to the GHz high frequency range with the lowest loss tangent only 0.20 and 0.44 at 500 MHZ and 1 GHz, respectively. Such ultrafine amorphous soft magnetic composites have enormous potential for high frequency applications in wide band gap semiconductor switching power supplies, RF inductors and chips. • The spherical amorphous powder was prepared by chemical reduction method with outstanding magnetic properties. • The particle size of the amorphous powder was regulated by adjusting the drop rate of the reducing agent solution. • The relationship between the powder particle size and the magnetic and electrical properties of ASMCs was elucidated. [ABSTRACT FROM AUTHOR]

• A novel hybrid amorphous soft magnetic composite (SMC) for MHz power applications is fabricated using amorphous powders of ultrafine spherical FeSiBCr and submicron FeBP powders. • The regularly spherical particles of submicron amorphous FeBP powders are found to occupy the gaps between the micron-sized FeSiBCr amorphous powders. • The magnetic loss of the soft magnetic composite mixed with only 1 wt% submicron amorphous FeBP particles is just 511 kW/m3 at 30 mT/1 MHz, and the permeability of DC bias superposition under 100 Oe reaches 90%. • The soft magnetic composite constructed by the pure submicron amorphous FeBP particles also shows excellent magnetic properties within a few hundred MHz region, with the permeability of 4–6 and the low loss tangent of only 0.019 at 200 MHz and 0.05 at 500 MHz. • This amorphous soft magnetic composite exhibits a great potential for the applications in wide band gap semiconductor switching power supplies, RF inductors and chips. A novel hybrid amorphous soft magnetic composite (SMC) for MHz power applications is fabricated using amorphous powders of ultrafine(<10 μm) spherical FeSiBCr and submicron(100 nm∼1 μm) FeBP powders. The submicron amorphous FeBP powders are found to occupy the gaps between the micron-sized FeSiBCr amorphous powders, enabling one to enhance the density and magnetic properties (permeability and loss) of the composite in a MHz frequency range. The magnetic loss of the soft magnetic composite mixed with only 1 wt% submicron amorphous particles is just 511 kW/m3 at 30 mT/1 MHz, and the permeability of DC bias superposition under 100 Oe reaches 90%. In addition, the permeability of the hybrid soft magnetic composite and the submicron amorphous composite reach 20 and 5, and the loss tangent is only 0.03–0.08 and 0.02 in 100 MHz region, respectively. This amorphous soft magnetic composite exhibits a great potential for the applications in wide band gap semiconductor switching power supplies. [ABSTRACT FROM AUTHOR]