Search

A novel magnetic field measurement method based on the magneto-volume effect is proposed. The magnetic field sensing structure fabricated by the proposed measurement method is made by the magnetic fluid (MF) partially filled into the hollow core fiber (HCF). The presence of air provides conditions for the change of MF volume with the magnetic field in the proposed sensing structure. Therefore, the magneto-volume effect is introduced into the magnetic field sensing mechanism. From 109.6 to 125.8 Gs, the peak wavelength shift is −65480 pm and the sensitivity is −4219.15 pm/Gs, which is 28.16 times higher than that of the fabricated contrast sensing structure. The sensitivity of the magnetic field sensing structure is greatly improved by introducing the magneto-volume effect compared with the contrast sensing structure. The response time and recovery time of the sensing structure are equally 0.2 s. Therefore, the sensing structure has high sensitivity, good linearity, and short response time, which has potential application prospects in magnetic field sensing. [ABSTRACT FROM AUTHOR]

A magnetic field measurement method based on the magneto-volume effect of magnetic fluid (MF) and Fabry–Perot (FP) interferometer (FPI) is proposed, which has higher magnetic field sensitivity and shorter response time than the traditional optical fiber methods. The MF is partially injected into the fabricated FP cavity composed of two sections of SMFs and a capillary glass tube (CGT), where the FPI is made up of optical fiber end face and MF end face. When the external magnetic field is applied to the sensor, the volume change of MF will cause the change of air cavity length. Therefore, the reflection spectrum changes with external magnetic field due to the magneto-volume effect of MF. Experimental results show that the magnetic field sensor shows a sensitivity of 268.81 pm/Gs from 15.5 to 139.7 Gs even with a small amount of MF. The response time is 0.2 s at a step magnetic field of 7.7, 31.0, 46.5, and 139.7 Gs. In this work, the magnetic field sensor boasts high sensitivity, good repeatability, short response time, and low cost, which shows a great potential in applications. [ABSTRACT FROM AUTHOR]

A highly sensitive reflective Fabry–Perot (FP) magnetic field sensor using magnetic fluid (MF) based on the Vernier effect is presented and experimentally verified. Capillary action acts as an injection of MF into an FP cavity, which is composed of a single-mode fiber (SMF), capillary glass tube, and a short section of SMF coated with gold film. Vernier effect is formed by the MF cavity and air cavity in the FP magnetic field sensor, where the surface of MF is concave. The refractive index (RI) of MF depends on the magnetic field, and therefore, the wavelength of the reflection spectrum of the fabricated sensor can be sensitive to the magnetic field. The magnetic field sensor’s sensitivity is up to 1.02602 nm/Gs from 118.768 to 166.261 Gs, and the resolution is 0.0078 Gs. The sensor shows good linearity within the range of 71.317–231.751 Gs, and the linearity is larger than 0.999. In this article, a new type FP cavity fabricated by splicing SMF inside the capillary glass tube is proposed, and MF can be injected into the FP cavity, which can also be applied to other liquids to generate Vernier effect. The concave surface of MF is creatively applied to the sensors, and the experimental verification is carried out in a capillary glass tube, which provides a basis on the capillary action of other fluids in fiber sensing. [ABSTRACT FROM AUTHOR]

• The magnetic field sensor composed of an ultra-short FPI filled with oil-based magnetic fluid cascaded with a bending coated single-mode-fiber MZI is proposed. • The FPI with ultra-short cavity (about 20 μm) composed of two sections of single mode fiber and a hollow core fiber drilled through by femtosecond laser. • The sensitivities of magnetic field and temperature are up to 240 pm/Gs and −2310 pm/℃ respectively. A fiber magnetic field sensor with temperature compensation is put forward and experimentally verified by utilizing Fabry-Perot interferometer (FPI) and multimode interferometer (MI). The FPI with ultra-short cavity (about 20 μm), which is proposed to improve the spectrum contrast after being filled with oil-based magnetic fluids (MF) and achieve the sensing of magnetic field, is drilled through by femtosecond laser. The FPI is composed of two sections of single mode fiber and a hollow core fiber, which is named as single mode fiber-hollow core fiber-single mode fiber (SHS). The MI composed of the coated-fiber-loop, which is only sensitive to temperature, is proposed to compensate the temperature on the sensing of magnetic field. The fiber loop is fabricated by only bending a section of coated single mode fiber (SMF). According to the experiment results, the spectrum visibility of magnetic field sensing part can be improved by 3.1 times by shortening the Fabry-Perot (FP) cavity length. The interference wavelength increases nonlinearly from 0 to 69.1 Gs while linearly from 69.1 to 137.7 Gs. In addition, its temperature sensitivity is −0.20 nm/℃ from 23.0 to 42.9 ℃. Moreover, the sensitivity of MI is −2.31 nm/℃ from 23.0 to 42.9 ℃. It could be used to compensate the temperature influence effectively. The structure boasts characteristics of simple manufacture, low cost and highly-sensitive, which can be applied in the fields of magnetic field sensing. [ABSTRACT FROM AUTHOR]

• Magneto-shape effect of magnetic fluid was proposed and used to measure magnetic field. • The sensor consists of a capillary glass tube, two single-mode fibers and magnetic fluid. • Experimental results show that the sensor can easily react to field strength and orientation. • Measurement sensitivity reaches up to 296.1 pm/Gs from 22.6 Gs to 121.8 Gs in the axial field. In this work, an optic-fiber sensor utilizing magneto-shape effect of magnetic fluid (MF) has been put forward to measure magnetic field direction. MF magneto-shape effect has been presented, simulated and verified through experiments as a magneto-optical effect. The sensor consists of a capillary glass tube, two single-mode fibers (SMFs) and MF. The interface between MF and air is concave because the glass tube is attractive to MF. As magnetic field rises, the concavity degree becomes more obvious, in other words, edge length of MF cavity is extended and central length of cavity is shortened. The interference wavelength of sensor will change with magnetic field, so as to achieve the purpose of monitoring magnetic field. The phenomenon is defined as the magneto-shape effect of MF. Due to the magnetic field direction dependence of pressure difference between the MF and air, the magneto-shape effect of MF has different perception of axial magnetic field and radial magnetic field, realizing vector magnetic field measurement. Results of experiment are shown as follows: the sensor can easily react to field strength and orientation. The wavelength shows the shape of number "8″ with magnetic field direction changing. The field sensitivity reaches up to 296.1 pm/Gs from 22.6 Gs to 121.8 Gs in the axial field. Moreover, direction sensitivity reaches 311.6 pm/° at 104.4 Gs. The wavelength shift in the axial direction is 25.5 times higher than that of the radial direction. The presented sensing structure could monitor vector magnetic field without constructing a non-circular symmetrical structure. The proposed sensing structure is provided with characteristics of simple to make, highly-sensitive and little fabrication consumption. It possesses potential applications in electronic power industry and aerospace. [ABSTRACT FROM AUTHOR]