Search

Background: X-ray breast imaging modalities are commonly employed for breast cancer detection, from screening programs to diagnosis. Thus, dosimetry studies are important for quality control and risk estimation since ionizing radiation is used., Purpose: To perform multiscale dosimetry assessments for different breast imaging modalities and for a variety of breast sizes and compositions. The first part of our study is focused on macroscopic scales (down to millimeters)., Methods: Nine anthropomorphic breast phantoms with a voxel resolution of 0.5 mm were computationally generated using the BreastPhantom software, representing three breast sizes with three distinct values of volume glandular fraction (VGF) for each size. Four breast imaging modalities were studied: digital mammography (DM), contrast-enhanced digital mammography (CEDM), digital breast tomosynthesis (DBT) and dedicated breast computed tomography (BCT). Additionally, the impact of tissue elemental compositions from two databases were compared. Monte Carlo (MC) simulations were performed with the MC-GPU code to obtain the 3D glandular dose distribution (GDD) for each case considered with the mean glandular dose (MGD) fixed at 4 mGy (to facilitate comparisons)., Results: The GDD within the breast is more uniform for CEDM and BCT compared to DM and DBT. For large breasts and high VGF, the ratio between the minimum/maximum glandular dose to MGD is 0.12/4.02 for DM and 0.46/1.77 for BCT; the corresponding results for a small breast and low VGF are 0.35/1.98 (DM) and 0.63/1.42 (BCT). The elemental compositions of skin, adipose and glandular tissue have a considerable impact on the MGD, with variations up to 30% compared to the baseline. The inclusion of tissues other than glandular and adipose within the breast has a minor impact on MGD, with differences below 2%. Variations in the final compressed breast thickness alter the shape of the GDD, with a higher compression resulting in a more uniform GDD., Conclusions: For a constant MGD, the GDD varies with imaging modality and breast compression. Elemental tissue compositions are an important factor for obtaining MGD values, being a source of systematic uncertainties in MC simulations and, consequently, in breast dosimetry., (© 2023 The Authors. Medical Physics published by Wiley Periodicals LLC on behalf of American Association of Physicists in Medicine.)

Purpose: A clinical-prototype, dedicated, cone-beam breast computed tomography (CBBCT) system with offset detector is undergoing clinical evaluation at our institution. This study is to estimate the normalized glandular dose coefficients ( DgN CT ) that provide air kerma-to-mean glandular dose conversion factors using Monte Carlo simulations., Materials and Methods: The clinical prototype CBBCT system uses 49 kV x-ray spectrum with 1.39 mm 1st half-value layer thickness. Monte Carlo simulations (GATE, version 8) were performed with semi-ellipsoidal, homogeneous breasts of various fibroglandular weight fractions ( f g = 0.01 , 0.15 , 0.5 , 1 ) , chest wall diameters ( d = 8 , 10 , 14 , 18 , 20  cm), and chest wall to nipple length ( l = 0.75 d ), aligned with the axis of rotation (AOR) located at 65 cm from the focal spot to determine the DgN CT . Three geometries were considered - 40 × 30 -cm detector with no offset that served as reference and corresponds to a clinical CBBCT system, 30 × 30 -cm detector with 5 cm offset, and a 30 × 30 -cm detector with 10 cm offset., Results: For 5 cm lateral offset, the DgN CT ranged 0.177 - 0.574  mGy/mGy and reduction in DgN CT with respect to reference geometry was observed only for 18 cm ( 6.4 % ± 0.23 % ) and 20 cm ( 9.6 % ± 0.22 % ) diameter breasts. For the 10 cm lateral offset, the DgN CT ranged 0.221 - 0.581  mGy/mGy and reduction in DgN CT was observed for all breast diameters. The reduction in DgN CT was 1.4 % ± 0.48 % , 7.1 % ± 0.13 % , 17.5 % ± 0.19 % , 25.1 % ± 0.15 % , and 27.7 % ± 0.08 % for 8, 10, 14, 18, and 20 cm diameter breasts, respectively. For a given breast diameter, the reduction in DgN CT with offset-detector geometries was not dependent on f g . Numerical fits of DgN CT d , l , f g were generated for each geometry., Conclusion: The DgN CT and the numerical fit, D g N CT d , l , f g would be of benefit for current CBBCT systems using the reference geometry and for future generations using offset-detector geometry. There exists a potential for radiation dose reduction with offset-detector geometry, provided the same technique factors as the reference geometry are used, and the image quality is clinically acceptable., (© 2021 American Association of Physicists in Medicine.)

This work demonstrates the potential for using a deformable mapping method to register lesions between dedicated breast computed tomography (bCT) and both automated breast ultrasound (ABUS) and digital breast tomosynthesis (DBT) images (craniocaudal [CC] and mediolateral oblique [MLO] views). Two multi-modality breast phantoms with external fiducial markers attached were imaged by the three modalities. The DBT MLO view was excluded for the second phantom. The automated deformable mapping algorithm uses biomechanical modeling to determine corresponding lesions based on distances between their centers of mass (d COM ) in the deformed bCT model and the reference model (DBT or ABUS). For bCT to ABUS, the mean d COM was 5.2 ± 2.6 mm. For bCT to DBT (CC), the mean d COM was 5.1 ± 2.4 mm. For bCT to DBT (MLO), the mean d COM was 4.7 ± 2.5 mm. This application could help improve a radiologist's efficiency and accuracy in breast lesion characterization, using multiple imaging modalities., Competing Interests: Conflict of interest disclosure M. Goodsitt is a co-investigator on a grant funded by GE Healthcare. C. Davis is an employee of General Electric Corporation and holds several US patents on medical imaging. M. Goodsitt and P. Carson are collaborators on research with GE Global Research, Niskayuna, NY., (Copyright © 2019 World Federation for Ultrasound in Medicine & Biology. Published by Elsevier Inc. All rights reserved.)

Background: High-resolution, low-noise detectors with minimal dead-space at chest-wall could improve posterior coverage and microcalcification visibility in the dedicated cone-beam breast CT (CBBCT). However, the smaller field-of-view necessitates laterally-shifted detector geometry to enable optimizing the air-gap for x-ray scatter rejection., Objective: To evaluate laterally-shifted detector geometry for CBBCT with clinical projection datasets that provide for anatomical structures and lesions., Methods: CBBCT projection datasets (n = 17 breasts) acquired with a 40×30 cm detector (1024×768-pixels, 0.388-mm pixels) were truncated along the fan-angle to emulate 20.3×30 cm, 22.2×30 cm and 24.1×30 cm detector formats and correspond to 20, 120, 220 pixels overlap in conjugate views, respectively. Feldkamp-Davis-Kress (FDK) algorithm with 3 different weighting schemes were used for reconstruction. Visual analysis for artifacts and quantitative analysis of root-mean-squared-error (RMSE), absolute difference between truncated and 40×30 cm reconstructions (Diff), and its power spectrum (PSDiff) were performed., Results: Artifacts were observed for 20.3×30 cm, but not for other formats. The 24.1×30 cm provided the best quantitative results with RMSE and Diff (both in units of μ, cm-1) of 4.39×10-3±1.98×10-3 and 4.95×10-4±1.34×10-4, respectively. The PSDiff (>0.3 cycles/mm) was in the order of 10-14μ2mm3 and was spatial-frequency independent., Conclusions: Laterally-shifted detector CBBCT with at least 220 pixels overlap in conjugate views (24.1×30 cm detector format) provides quantitatively accurate and artifact-free image reconstruction.

Breast computed tomography (BCT) is an emerging application of X-ray tomography in radiological practice. A few clinical prototypes are under evaluation in hospitals and new systems are under development aiming at improving spatial and contrast resolution and reducing delivered dose. At the same time, synchrotron-radiation phase-contrast mammography has been demonstrated to offer substantial advantages when compared with conventional mammography. At Elettra, the Italian synchrotron radiation facility, a clinical program of phase-contrast BCT based on the free-space propagation approach is under development. In this paper, full-volume breast samples imaged with a beam energy of 32 keV delivering a mean glandular dose of 5 mGy are presented. The whole acquisition setup mimics a clinical study in order to evaluate its feasibility in terms of acquisition time and image quality. Acquisitions are performed using a high-resolution CdTe photon-counting detector and the projection data are processed via a phase-retrieval algorithm. Tomographic reconstructions are compared with conventional mammographic images acquired prior to surgery and with histologic examinations. Results indicate that BCT with monochromatic beam and free-space propagation phase-contrast imaging provide relevant three-dimensional insights of breast morphology at clinically acceptable doses and scan times.

Purpose: The purpose of this work was to generate uncompressed heterogeneous breast phantom models using size-dependent fibroglandular distributions derived from a large cohort of breast CT (bCT) datasets, and to compare differences in normalized glandular dose coefficients for bCT "DgN CT " when the realistic heterogeneous model is considered relative to the simple, homogeneous model used in the past., Methods: A cohort of 274 segmented bCT datasets were used to quantify the fibroglandular tissue distribution within the breast parenchyma. Each dataset was interpolated to an isotropic voxel size of 0.25 mm and the breast center-of-mass was aligned for all coronal slices. Each aligned dataset was converted into two binarized volumes representing voxels containing only glandular tissue "G(x,y,z)" and voxels containing glandular or adipose tissue "AG(x,y,z)". The datasets were classified by volume in accordance with previously reported size-dependent, breast-shaped phantoms. Within the five groups - each containing on average 55 datasets, all G(x,y,z) and AG(x,y,z) volumes were summed separately representing the cumulative distribution of glandular tissue or breast parenchyma (glandular + adipose), respectively. G(x,y,z) was divided by AG(x,y,z) on a voxel-by-voxel basis resulting in a glandular fraction "GF(x,y,z)" distribution for each phantom size. The GF(x,y,z) distributions were used to construct heterogeneous mathematical phantoms for the small, median, and large breast sizes with a 1.5 mm skin thickness - based on previously reported measurements from bCT, and a 5 mm skin thickness for comparison with outdated assumptions of skin thickness. A subset of 15 bCT datasets from the cohort (five for each breast size) were used to construct voxelized patient models for validation of the heterogeneous phantom models. Monte Carlo techniques were used to estimate monoenergetic DgN(E) C T values for photon energies from 9 to 70 keV (in 1 keV intervals) using the mathematical phantoms composed of either heterogeneous or homogeneous breast parenchyma. Polyenergetic (pDgN CT values by x-ray spectra tuned to the beam characteristic of breast CT. Dose coefficients were compared between the two breast compositions for each volume class, breast density, and skin thickness.C T values by x-ray spectra tuned to the beam characteristic of breast CT. Dose coefficients were compared between the two breast compositions for each volume class, breast density, and skin thickness., Results: For photon energies ≲45 keV, the homogeneous model overestimates DgN(E) values relative to the realistic heterogeneous model sorted into five volume classes. The 5 mm skin thickness underestimates DgN(E) values relative to the realistic 1.5 mm thickness for lower energies and the differences diminish up to 70 keV. Averaged across all phantom sizes the homogeneous model overestimates pDgN CT by 5.7% and 23.3% for the 60 kV W/Cu and 49 kV W/Al spectra, respectively. The heterogeneous model was also found to be in agreement with the voxelized bCT patient models with pDgN CT differences less than 2.3% and 5.2% for the 60 kV W/Cu and 49 kV W/Al spectra, respectively, across all phantom sizes., Conclusion: Anatomically accurate heterogeneous phantom models were developed using bCT image-derived fibroglandular tissue distributions. These new models improve the accuracy of bCT dosimetry, and in conjunction with previous models for mammography, may help in providing a more universally accepted breast dosimetry model., (© 2019 American Association of Physicists in Medicine.)

Purpose: To provide mean glandular dose (MGD) estimates via Monte Carlo (MC) simulations as a function of the breast models and scan parameters in mammography, digital breast tomosynthesis (DBT) and dedicated breast CT (BCT)., Methods: The MC code was based on GEANT4 toolkit. The simulated compressed breast was either a cylinder with a semi-circular section or ad hoc shaped for oblique view (MLO). In DBT we studied the influence of breast models and exam parameters on the T-factors (i.e. the conversion factor for the calculation of the MGD in DBT from that for a 0-degree projection), and in BCT we investigated the influence on the MGD estimates of the ion chamber volume used for the air kerma measurements., Results: In mammography, a model representative of a breast undergoing an MLO view exam did not produce substantial differences (0.4%) in MGD estimates, when compared to a conventional cranio-caudal (CC) view breast model. The beam half value layer did not present a significant influence on T-factors in DBT (<0.8%), while the skin model presented significant influence on MGD estimates (up to 3.3% at 30 degrees scan angle), increasing for larger scan angles. We derived a correction factor for taking into account the different ion chamber volume used in MGD estimates in BCT., Conclusions: A series of MC code modules for MGD estimates in 2D and 3D breast imaging have been developed in order to take into account the most recent advances in breast models., (Copyright © 2018 Associazione Italiana di Fisica Medica. Published by Elsevier Ltd. All rights reserved.)

Hounsfield Units (HU) are used clinically in differentiating tissue types in a reconstructed CT image, and therefore the HU accuracy of a system is important, especially when using multiple sources, novel detector and non-traditional trajectories. Dedicated clinical breast CT (BCT) systems therefore should be similarly evaluated. In this study, uniform cylindrical phantoms filled with various uniform density fluids were used to characterize differences in HU values between simple circular and complex 3D (saddle) orbits. Based on ACR recommendations, the HU accuracy, center-to-edge variability within a slice, and overall variability within the reconstructed volume were characterized for simple and complex acquisitions possible on a single versatile BCT system. Results illustrate the statistically significantly better performance of the saddle orbit, especially close to the chest and nipple regions of what would clinically be a pendant breast volume. The incomplete cone beam acquisition of a simple circular orbit causes shading artifacts near the nipple, due to insufficient sampling, rendering a major portion of the scanned phantom unusable, whereas the saddle orbit performs exceptionally well and provides a tighter distribution of HU values throughout the reconstructed volumes. This study further establishes the advantages of using 3D acquisition trajectories for breast CT as well as other applications by demonstrating the robustness of HU values throughout large reconstructed volumes.

Rationale and Objectives: Dedicated breast computed tomography (DBCT) is an emerging and promising modality for breast lesions. The objective of this study was to evaluate the potential use of applying the BI-RADS Mammography Atlas 5th Edition for reporting and assessing breast lesions on DBCT. Currently, no atlas exists for DBCT., Materials and Methods: Four radiologists trained in breast imaging were recruited in this institutional review board-approved, Health Insurance Portability and Accountability Act-compliant study. The enrolled radiologists, who were blinded to mammographic and histopathologic findings, individually reviewed 30 randomized DBCT cases that contained marked lesions. Thirty-four lesions were included in this study: 24 (70.6%) masses, 7 (20.6%) calcifications, and 3 (8.8%) architectural distortions. Eight (23.5%) lesions were malignant and 26 (76.5%) were benign. The reader was asked to specify according to the BI-RADS Mammography Atlas for each marked DBCT lesion: primary findings, features, breast density, and final assessment. We calculated readers' diagnostic performances for differentiating between benign and malignant lesions and interobserver variability for reporting and assessing lesions using a generalized estimating equation and the Fleiss kappa (κ) statistic., Results: The estimated overall sensitivity of the readers was 0.969, and the specificity was 0.529. There were no significant differences in the sensitivity and the specificity between lesion types. For reporting the presence of a primary finding, the overall substantial agreement (κ = 0.70) was seen. In assigning the breast density and the final assessment, the overall agreement was moderate (κ = 0.53) and fair (κ = 0.30)., Conclusion: The use of the BI-RADS Mammography Atlas 5th Edition for DBCT showed high performance and good agreement among readers., (Copyright © 2017 The Association of University Radiologists. Published by Elsevier Inc. All rights reserved.)

The dedicated cone-beam breast computed tomography (CBBCT) is a new and promising imaging modality which provides isotropic, 3D images of the breast with high spatial and contrast resolution. Non-contrast and contrast-enhanced CBBCT (CE-CBBCT) was superior to mammography for the visualization of breast masses, especially in patients with dense breast tissue. CE-CBBCT accurately detects DCIS and distinguishes it from benign causes of microcalcifications when compared with non-contrast CBBCT and mammography. The purpose of this report is to describe the technology and its possible indications, and to present the first results from recent clinical studies, illustrating these with our own image examples., (Copyright © 2016 Elsevier Inc. All rights reserved.)

Objective: The purpose of this study was to utilize a dedicated breast CT system using a 2D beam stop array to physically evaluate the scatter to primary ratios (SPRs) of different geometric phantoms and prospectively acquired clinical patient data., Methods: Including clinically unrealizable compositions of 100% glandular and 100% fat, projection images were acquired using three geometrically different phantoms filled with fluids simulating breast tissue. The beam stop array method was used for measuring scatter in projection space, and creating the scatter corrected primary images. 2D SPRs were calculated. Additionally, a new figure of merit, the 3D normalized scatter contribution (NSC) volumes were calculated., Results: The 2D SPR values (0.52-1.10) were primarily dependent on phantom geometry; a secondary dependence was due to their uniform density; 2D SPRs were low frequency and smoothly varying in the uniformly filled phantoms. SPRs of clinical patient data followed similar trends as phantoms, but with noticeable deviations and high frequency components due to the heterogeneous distribution of glandular tissue. The maximum measured patient 2D SPRs were all <0.6, even for the largest diameter breast. These results demonstrate modest scatter components with changing object geometries and densities; the 3D NSC volumes with higher frequency components help visualize scatter distribution throughout the reconstructed image volumes. Furthermore, the SPRs in the heterogeneous clinical breast cases were underestimated by the equivalent density, uniformly filled phantoms., Conclusions: These results provide guidance on the use of uniformly distributed density and differently shaped phantoms when considering simulations. They also clearly demonstrate that results from patients can vary considerably from 2D SPRs of uniformly simulated phantoms.

Purpose: Compare conspicuity of ductal carcinoma in-situ (DCIS) to benign calcifications on unenhanced (bCT), contrast-enhanced dedicated breast CT (CEbCT) and mammography (DM)., Methods and Materials: The institutional review board approved this HIPAA-compliant study. 42 women with Breast Imaging Reporting and Data System 4 or 5 category micro-calcifications had breast CT before biopsy. Three subjects with invasive disease at surgery were excluded. Two breast radiologists independently compared lesion conspicuity scores (CS) for CEbCT, to bCT and DM. Enhancement was measured in Hounsfield units (HU). Mean CS ± standard deviations are shown. Receiver operating characteristic analysis (ROC) measured radiologists' discrimination performance by comparing CS to enhancement alone. Statistical measurements were made using ANOVA F-test, Wilcoxon rank-sum test and robust linear regression analyses., Results: 39 lesions (17 DCIS, 22 benign) were analyzed. DCIS (8.5 ± 0.9, n=17) was more conspicuous than benign micro-calcifications (3.6 ± 2.9, n=22; p<0.0001) on CEbCT. DCIS was equally conspicuous on CEbCT and DM (8.5 ± 0.9, 8.7 ± 0.8, n=17; p=0.85) and more conspicuous when compared to bCT (5.3 ± 2.6, n=17; p<0.001). All DCIS enhanced; mean enhancement (90HU ± 53HU, n=17) was higher compared to benign lesions (33 ± 30HU, n=22) (p<0.0001). ROC analysis of the radiologists' CS showed high discrimination performance (AUC=0.94) compared to enhancement alone (AUC=0.85) (p<0.026)., Conclusion: DCIS is more conspicuous than benign micro-calcifications on CEbCT. DCIS visualization on CEbCT is equal to mammography but improved compared to bCT. Radiologists' discrimination performance using CEBCT is significantly higher than enhancement values alone. CEbCT may have an advantage over mammography by reducing false positive examinations when calcifications are analyzed., (Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.)

Breast CT is an emerging modality that reconstructs 3D linear attenuation coefficient (μ) images of the breast. Its tomographic nature reduces the overlap of structures and may improve tissue visualization. Current prototype systems produce large levels of scatter that could be used to reconstruct electron density (ρ &#95;{e}) images. This could potentially enhance diagnosis. We are developing a first generation bench top CT system to investigate the benefits of simultaneous imaging μ and ρ &#95;{e} of the intact breast. The system uses an algorithm capable of reconstructing ρ &#95;{e} images from single Klein-Nishina scatter. It has been suggested that this algorithm may be impractical since measurements include coherent, bound incoherent and multiple scatter. To investigate this, the EGSnrc Monte Carlo (MC) code was used to simulate scans using a first generation system. These simulations were used to quantify the dose per scan, to provide raw data for the ρ &#95;{e} reconstructions and to investigate corrections for multiple and coherent scatter since these can not be directly related to ρ &#95;{e}. MC simulations show that the dose coefficients are similar to those of cone beam breast CT. Coherent scatter is only ∼9% concentrated in scattering angles < 8°. Electron binding reduces the number of incoherently scattered photons but this reduction can be included in the quantification of scatter measured by the system. Multiple scatter was found to be the major source of errors and, if not corrected for, can result in an overestimation of ρ &#95;{e} by more than a factor of two. Empirical corrections, based on breast thickness or radiological path, can be used to reconstruct images where the variance in ρ &#95;{e} error is half of that found in images derived from primary photons only. Although some practical challenges remain in creating a laboratory system, this work has shown that it is possible to reconstruct scatter images of the breast with a 4 mGy dose and further experimental evaluation of this technique is warranted.

Dedicated breast CT is an imaging modality that provides true 3D imaging of the breast with many advantages over current conventional breast imaging modalities. The addition of intravascular contrast increases the sensitivity of breast CT substantially. As such, there are immediate potential applications in the clinical workflow. These include using breast CT to replace much of the traditional diagnostic workup when faced with indeterminate breast lesions. Contrast-enhanced breast CT may be appropriate as a supplemental screening tool for women at high risk of breast cancer, similar to breast MRI. In addition, emerging studies are demonstrating the utility of breast CT in neoadjuvant chemotherapy tumor response monitoring as well as planning for surgical treatment options. While short exam times and fully 3D imaging in a noncompressed position are advantages of this modality, limited coverage of chest wall/axilla due to prone positioning and use of ionizing radiation are drawbacks. To date, several studies have reported on the performance characteristics of this promising modality. [ABSTRACT FROM AUTHOR]

The aim of this work was the evaluation of the software BreastSimulator, a breast x-ray imaging simulation software, as a tool for the creation of 3D uncompressed breast digital models and for the simulation and the optimization of computed tomography (CT) scanners dedicated to the breast. Eight 3D digital breast phantoms were created with glandular fractions in the range 10%-35%. The models are characterised by different sizes and modelled realistic anatomical features. X-ray CT projections were simulated for a dedicated cone-beam CT scanner and reconstructed with the FDK algorithm. X-ray projection images were simulated for 5 mono-energetic (27, 32, 35, 43 and 51 keV) and 3 poly-energetic x-ray spectra typically employed in current CT scanners dedicated to the breast (49, 60, or 80 kVp). Clinical CT images acquired from two different clinical breast CT scanners were used for comparison purposes. The quantitative evaluation included calculation of the power-law exponent, β, from simulated and real breast tomograms, based on the power spectrum fitted with a function of the spatial frequency, f, of the form S(f)  =  α/f   β . The breast models were validated by comparison against clinical breast CT and published data. We found that the calculated β coefficients were close to that of clinical CT data from a dedicated breast CT scanner and reported data in the literature. In evaluating the software package BreastSimulator to generate breast models suitable for use with breast CT imaging, we found that the breast phantoms produced with the software tool can reproduce the anatomical structure of real breasts, as evaluated by calculating the β exponent from the power spectral analysis of simulated images. As such, this research tool might contribute considerably to the further development, testing and optimisation of breast CT imaging techniques.

Conventional mammographic dosimetry has been developed over the past 40 years. Prior to the availability of high-resolution three-dimensional breast images, certain assumptions about breast anatomy were required. These assumptions were based on the information evident on two-dimensional mammograms; they included assumptions of thick skin, a uniform mixture of glandular and adipose tissue, and a median breast density of 50%. Recently, the availability of high-resolution breast CT studies has provided more accurate data about breast anatomy, and this, in turn, has provided the opportunity to update mammographic dosimetry. Based on hundreds of data sets on breast CT volume, a number of studies were performed and reported which have shed light on the basic breast anatomy specific to dosimetry in mammography. It was shown that the average skin thickness of the breast was approximately 1.5 mm, instead of the 4 or 5 mm in the past. In another study, 3-D breast CT data sets were used for validation of the 2-D algorithm developed at the University of Toronto, leading to data suggesting that the overall average breast density is of the order of 16-20%, rather than the previously assumed 50%. Both of these assumptions led to normalized glandular dose (DgN) coefficients which are higher than those of the past. However, a comprehensive study on hundreds of breast CT data sets confirmed the findings of other investigators that there is a more centralized average location of glandular tissue within the breast. Combined with Monte Carlo studies for dosimetry, when accurate models of the distribution of glandular tissue were used, a 30% reduction in the radiation dose (as determined by the DgN coefficient) was found as an average across typical molybdenum and tungsten spectra used clinically. The 30% average reduction was found even when the thinner skin and the lower average breast density were considered. The article reviews three specific anatomic observations made possible based on high-resolution breast CT data by several different research groups. It is noted that, periodically, previous assumptions pertaining to dosimetry can be updated when new information becomes available, so that more accurate dosimetry is achieved. Dogmatic practices typically change slowly, but it is hoped that the medical physics community will continue to evaluate changes in DgN coefficients such that they become more accurate.

PurposeCurrent dosimetry methods in mammography assume that the breast is comprised of a homogeneous mixture of glandular and adipose tissues. Three-dimensional (3D) dedicated breast CT (bCT) data sets were used previously to assess the complex anatomical structure within the breast, characterizing the statistical distribution of glandular tissue in the breast. The purpose of this work was to investigate the effect of bCT-derived heterogeneous glandular distributions on dosimetry in mammography.MethodsbCT-derived breast diameters, volumes, and 3D fibroglandular distributions were used to design realistic compressed breast models comprised of heterogeneous distributions of glandular tissue. The bCT-derived glandular distributions were fit to biGaussian functions and used as probability density maps to assign the density distributions within compressed breast models. The MCNPX 2.6.0 Monte Carlo code was used to estimate monoenergetic normalized mean glandular dose "DgN(E)" values in mammography geometry. The DgN(E) values were then weighted by typical mammography x-ray spectra to determine polyenergetic DgN (pDgN) coefficients for heterogeneous (pDgNhetero) and homogeneous (pDgNhomo) cases. The dependence of estimated pDgN values on phantom size, volumetric glandular fraction (VGF), x-ray technique factors, and location of the heterogeneous glandular distributions was investigated.ResultsThe pDgNhetero coefficients were on average 35.3% (SD, 4.1) and 24.2% (SD, 3.0) lower than the pDgNhomo coefficients for the Mo-Mo and W-Rh x-ray spectra, respectively, across all phantom sizes and VGFs when the glandular distributions were centered within the breast phantom in the coronal plane. At constant breast size, increasing VGF from 7.3% to 19.1% lead to a reduction in pDgNhetero relative to pDgNhomo of 23.6%-27.4% for a W-Rh spectrum. Displacement of the glandular distribution, at a distance equal to 10% of the compressed breast width in the superior and inferior directions, resulted in a 37.3% and a -26.6% change in the pDgNhetero coefficient, respectively, relative to the centered distribution for the Mo-Mo spectrum. Lateral displacement of the glandular distribution, at a distance equal to 10% of the compressed breast width, resulted in a 1.5% change in the pDgNhetero coefficient relative to the centered distribution for the W-Rh spectrum.ConclusionsIntroducing bCT-derived heterogeneous glandular distributions into mammography phantom design resulted in decreased glandular dose relative to the widely used homogeneous assumption. A homogeneous distribution overestimates the amount of glandular tissue near the entrant surface of the breast, where dose deposition is exponentially higher. While these findings are based on clinically measured distributions of glandular tissue using a large cohort of women, future work is required to improve the classification of glandular distributions based on breast size and overall glandular fraction.

PURPOSE:The purpose of this study is to measure the effectiveness of local curvature measures as novel image features for classifying breast tumors. METHODS:A total of 119 breast lesions from 104 noncontrast dedicated breast computed tomography images of women were used in this study. Volumetric segmentation was done using a seed-based segmentation algorithm and then a triangulated surface was extracted from the resulting segmentation. Total, mean, and Gaussian curvatures were then computed. Normalized curvatures were used as classification features. In addition, traditional image features were also extracted and a forward feature selection scheme was used to select the optimal feature set. Logistic regression was used as a classifier and leave-one-out cross-validation was utilized to evaluate the classification performances of the features. The area under the receiver operating characteristic curve (AUC, area under curve) was used as a figure of merit. RESULTS:Among curvature measures, the normalized total curvature (CT) showed the best classification performance (AUC of 0.74), while the others showed no classification power individually. Five traditional image features (two shape, two margin, and one texture descriptors) were selected via the feature selection scheme and its resulting classifier achieved an AUC of 0.83. Among those five features, the radial gradient index (RGI), which is a margin descriptor, showed the best classification performance (AUC of 0.73). A classifier combining RGI and CT yielded an AUC of 0.81, which showed similar performance (i.e., no statistically significant difference) to the classifier with the above five traditional image features. Additional comparisons in AUC values between classifiers using different combinations of traditional image features and CT were conducted. The results showed that CT was able to replace the other four image features for the classification task. CONCLUSIONS:The normalized curvature measure contains useful information in classifying breast tumors. Using this, one can reduce the number of features in a classifier, which may result in more robust classifiers for different datasets.

The goal of this work is to determine the optimal projection to detect breast masses on Chest CT. Institutional Review Board (HIPPA compliant) approval was obtained with a waiver of consent. 10 image pairs of Chest CT images containing breast masses were selected for review by 10 chest radiologists: the pairs consisted of axial, sagittal, coronal and axial MIP images (MIP images) with each projection compared to a MIP and with one another. For each pair, the image where the mass was most conspicuous was recorded. MIPs were preferred to any cross sectional projection 82% of the time; sagittal (63%) or coronal (63%) images were preferred to the axial projection. When sagittal and coronal images were compared there was no preference. MIP images should be obtained and reviewed for breast pathology; sagittal or coronal projections may provide additional information. • Denser breast mass is more conspicuous on the MIP images. • Radiologists preferred the MIP images for breast mass detection. • Sagittal and coronal images were found to be equally preferable to axial. [ABSTRACT FROM AUTHOR]

Purpose: With the advent of three‐dimensional (3D) breast imaging modalities such as digital breast tomosynthesis (DBT) and dedicated breast CT (bCT), research into new anthropomorphic breast phantoms has accelerated. These breast phantoms are important for the optimization of new breast imaging systems, assessing new regulatory submissions to prove safety and effectiveness, and for developing new approaches to acceptance and constancy testing of 3D breast imaging systems. This paper provides a review of current research investigating both digital and physical breast phantom development for use in x‐ray based imaging. Methods: Two approaches for designing anthropomorphic, digital breast phantoms are discussed, procedural model‐based phantom generation, where breast features are expressed using mathematical models, and patient‐based generation, where breast structures from tissue specimens or patient‐based breast MR or CT volumes are segmented. Following this discussion, a review of physical anthropomorphic phantoms is given, with emphasis on the advantages and disadvantages present with each approach. Conclusions: This paper provides a summary of the state‐of‐the‐art in anthropomorphic breast phantom development for x‐ray breast imaging. The primary advantage of model‐based digital phantoms is that an unlimited number of phantoms with varying size, shape, and density can be generated. Current research on model‐based breast phantoms is producing more and more realistic breast models; however, they probably are not yet able to pass the so‐called "fool the radiologist" visualization test. Empirical patient‐based breast phantoms are typically based on clinical breast CT data and look more realistic. However, clinical breast CT images have limited spatial resolution and thus do not always portray the finer details in the breast. A number of innovative solutions have been proposed for fabricating physical anthropomorphic breast phantoms based on digital phantom models; however, a number of challenges remain, including realistic modeling of x‐ray attenuation properties and accurately representing high‐frequency structures within breast. [ABSTRACT FROM AUTHOR]

Purpose: For a given bowtie filter design, both the selection of material and the physical design control the energy fluence, and consequently the dose distribution, in the object. Using three previously described bowtie filter designs, the goal of this work is to demonstrate the effect that different materials have on the bowtie filter performance measures. Methods: Three bowtie filter designs that compensate for one or more aspects of the beam-modifying effects due to the differences in path length in a projection have been designed. The nature of the designs allows for their realization using a variety of materials. The designs were based on a phantom, 14 cm in diameter, composed of 40% fibroglandular and 60% adipose tissue. Bowtie design #1 is based on single material spectral matching and produces nearly uniform spectral shape for radiation incident upon the detector. Bowtie design #2 uses the idea of basis-material decomposition to produce the same spectral shape and intensity at the detector, using two different materials. With bowtie design #3, it is possible to eliminate the beam hardening effect in the reconstructed image by adjusting the bowtie filter thickness so that the effective attenuation coefficient for every ray is the same. Seven different materials were chosen to represent a range of chemical compositions and densities. After calculation of construction parameters for each bowtie filter design, a bowtie filter was created using each of these materials (assuming reasonable construction parameters were obtained), resulting in a total of 26 bowtie filters modeled analytically and in the PENELOPE Monte Carlo simulation environment. Using the analytical model of each bowtie filter, design profiles were obtained and energy fluence as a function of fan-angle was calculated. Projection images with and without each bowtie filter design were also generated using PENELOPE and reconstructed using FBP. Parameters such as dose distribution, noise uniformity, and scatter were investigated. Results: Analytical calculations with and without each bowtie filter show that some materials for a given design produce bowtie filters that are too large for implementation in breast CT scanners or too small to accurately manufacture. Results also demonstrate the ability to manipulate the energy fluence distribution (dynamic range) by using different materials, or different combinations of materials, for a given bowtie filter design. This feature is especially advantageous when using photon counting detector technology. Monte Carlo simulation results from PENELOPE show that all studied material choices for bowtie design #2 achieve nearly uniform dose distribution, noise uniformity index less than 5%, and nearly uniform scatter-to-primary ratio. These same features can also be obtained using certain materials with bowtie designs #1 and #3. Conclusions: With the three bowtie filter designs used in this work, the selection of material is an important design consideration. An appropriate material choice can improve image quality, dose uniformity, and dynamic range. [ABSTRACT FROM AUTHOR]

X-ray mammography of the compressed breast is well recognized as the "gold standard" for early detection of breast cancer, but its performance is not ideal. One limitation of screening mammography is tissue superposition, particularly for dense breasts. Since 2001, several research groups in the USA and in the European Union have developed computed tomography (CT) systems with digital detector technology dedicated to x-ray imaging of the uncompressed breast (breast CT or BCT) for breast cancer screening and diagnosis. This CT technology--tracing back to initial studies in the 1970s-- allows some of the limitations of mammography to be overcome, keeping the levels of radiation dose to the radiosensitive breast glandular tissue similar to that of two-view mammography for the same breast size and composition. This paper presents an evaluation of the research efforts carried out in the invention, development, and improvement of BCT with dedicated scanners with state-of-the-art technology, including initial steps toward commercialization, after more than a decade of R&D in the laboratory and/or in the clinic. The intended focus here is on the technological/engineering aspects of BCT and on outlining advantages and limitations as reported in the related literature. Prospects for future research in this field are discussed. [ABSTRACT FROM AUTHOR]

Mammography is the gold standard in routine screening for the detection of breast cancer in the general population. However, limitations in sensitivity, particularly in dense breasts, has motivated the development of alternative imaging techniques such as digital breast tomosynthesis, whole breast ultrasound, breast-specific gamma imaging, and more recently dedicated breast computed tomography or 'breast CT'. Virtually all diagnostic work-ups of asymptomatic nonpalpable findings arise from screening mammography. In most cases, diagnostic mammography and ultrasound are sufficient for diagnosis, with magnetic resonance imaging ( MRI) playing an occasional role. Digital breast tomosynthesis, a limited-angle tomographic technique, is increasingly being used for screening. Dedicated breast CT has full three-dimensional (3D) capability with near-isotropic resolution, which could potentially improve diagnostic accuracy. In current dedicated breast CT clinical prototypes, 300-500 low-dose projections are acquired in a circular trajectory around the breast using a flat panel detector, followed by image reconstruction to provide the 3D breast volume. The average glandular dose to the breast from breast CT can range from as little as a two-view screening mammogram to approximately that of a diagnostic mammography examination. Breast CT displays 3D images of the internal structures of the breast; therefore, evaluation of suspicious features like microcalcifications, masses, and asymmetries can be made in multiple anatomical planes from a single scan. The potential role of breast CT for diagnostic imaging is illustrated here through clinical examples such as imaging soft tissue abnormalities and microcalcifications. The potential for breast CT to serve as an imaging tool for extent of disease evaluation and for monitoring neo-adjuvant chemotherapy response is also illustrated. [ABSTRACT FROM AUTHOR]

Purpose: Breast CT is an emerging imaging technique that can portray the breast in 3D and improve visualization of important diagnostic features. Early clinical studies have suggested that breast CT has sufficient spatial and contrast resolution for accurate detection of masses and microcalcifications in the breast, reducing structural overlap that is often a limiting factor in reading mammographic images. For a number of reasons, image quality in breast CT may be improved by use of an energy resolving photon counting detector. In this study, the authors investigate the improvements in image quality obtained when using energy weighting with an energy resolving photon counting detector as compared to that with a conventional energy integrating detector. Methods: Using computer simulation, realistic CT images of multiple breast phantoms were generated. The simulation modeled a prototype breast CT system using an amorphous silicon (a-Si), CsI based energy integrating detector with different x-ray spectra, and a hypothetical, ideal CZT based photon counting detector with capability of energy discrimination. Three biological signals of interest were modeled as spherical lesions and inserted into breast phantoms; hydroxyapatite (HA) to represent microcalcification, infiltrating ductal carcinoma (IDC), and iodine enhanced infiltrating ductal carcinoma (IIDC). Signal-to-noise ratio (SNR) of these three lesions was measured from the CT reconstructions. In addition, a psychophysical study was conducted to evaluate observer performance in detecting microcalcifications embedded into a realistic anthropomorphic breast phantom. Results: In the energy range tested, improvements in SNR with a photon counting detector using energy weighting was higher (than the energy integrating detector method) by 30%-63% and 4%-34%, for HA and IDC lesions and 12%-30% (with Al filtration) and 32%-38% (with Ce filtration) for the IIDC lesion, respectively. The average area under the receiver operating characteristic curve (AUC) for detection of microcalcifications was higher by greater than 19% (for the different energy weighting methods tested) as compared to the AUC obtained with an energy integrating detector. Conclusions: This study showed that breast CT with a CZT photon counting detector using energy weighting can provide improvements in pixel SNR, and detectability of microcalcifications as compared to that with a conventional energy integrating detector. Since a number of degrading physical factors were not modeled into the photon counting detector, this improvement should be considered as an upper bound on achievable performance. [ABSTRACT FROM AUTHOR]

Objective: This pilot study was undertaken to compare radiation dose, relative visibility/ conspicuity of biopsy-proven lesions, and relative patient comfort in diagnostic mammography and dedicated cone-beam breast computed tomography (CBBCT) in Breast Imaging-Reporting and Data System (BI-RADS)® 4 or 5 lesions. Materials and Methods: Thirty-six consecutive patients (37 breasts) with abnormal mammographic and/ or ultrasound categorized as BI-RADS® 4 or 5 lesions were evaluated with CBBCT prior to biopsy. Administered radiation dose was calculated for each modality. Mammograms and CBBCT images were compared side-by-side and lesion visibility/conspicuity was qualitatively scored. Histopathology of lesions was reviewed. Patients were administered a survey for qualitative evaluation of comfort between the two modalities. Results: CBBCT dose was similar to or less than diagnostic mammography, with a mean dose of 9.4 mGy (±3.1 SD) for CBBCT vs. 16.9 mGy (±6.9 SD) for diagnostic mammography in a total of 37 imaged breasts (P<0.001). Thirty-three of 34 mammographic lesions were scored as equally or better visualized in CBBCT relative to diagnostic mammography. Characterization of high-risk lesions was excellent. Patients reported greater comfort in CBBCT imaging relative to mammography. Conclusion: Our experience of side-by-side comparison of CBBCT and diagnostic mammography in BI-RADS® 4 and 5 breast lesions demonstrated a high degree of correlation between the two modalities across a variety of lesion types. Owing to favorable radiation dose profile, excellent visualization of lesions, and qualitative benefits including improved patient comfort, excellent field-of-view, and more anatomical evaluation of lesion margins, CBBCT offers a promising modality for diagnostic evaluation of breast lesions. [ABSTRACT FROM AUTHOR]

Purpose: For dosimetry and for work in optimization of x-ray imaging of the breast, it is commonly assumed that the breast is composed of 50% fibroglandular tissue and 50% fat. The purpose of this study was to assess whether this assumption was realistic. Methods: First, data obtained from an experimental breast CT scanner were used to validate an algorithm that measures breast density from digitized film mammograms. Density results obtained from a total of 2831 women, including 191 women receiving CT and from mammograms of 2640 women from three other groups, were then used to estimate breast compositions. Results: Mean compositions, expressed as percent fibroglandular tissue (including the skin), varied from 13.7% to 25.6% among the groups with an overall mean of 19.3%. The mean compressed breast thickness for the mammograms was 5.9 cm (σ=1.6 cm). 80% of the women in our study had volumetric breast density less than 27% and 95% were below 45%. Conclusions: Based on the results obtained from the four groups of women in our study, the “50-50” breast is not a representative model of the breast composition. [ABSTRACT FROM AUTHOR]

Purpose: To intra-individually compare patient comfort of spiral breast computed tomography (SBCT) versus digital mammography (DM).Method: This prospective IRB approved study included 79 patients undergoing both SBCT and DM for the assessment of BI-RADS 4 - 6 lesions. Following SBCT and DM patients answered a standardized questionnaire regarding "Overall patient comfort" and "Pain" on a 5-point Likert Scale. On the same Likert Scale, experienced radiologic technicians rated the workflow of the SBCT regarding patients' "Mobility", ease of patient "Positioning", patients' adherence to the examination ("Compliance") and expected image quality. Visibility of fibroglandular tissue in SBCT was independently rated by two breast radiologists on a 10-point Likert Scale. Subgroups stratified by menopausal status and body mass index (BMI) were analyzed.Results: Patients reported significantly lower pain during SBCT (4.73 ± 0.57) compared to DM (4.09 ± 0.90; P < 0.01). This effect was independent from BMI. However, pain reduction by SBCT was most pronounced in premenopausal (SBCT vs. DM: 4.79 ± 0.50 vs. 3.89 ± 0.99) compared to postmenopausal patients (4.71 ± 0.77 vs. 4.20 ± 0.89). Overall patient comfort in premenopausal patients tended to be higher in SBCT compared to DM (P = 0.08). Radiologic technicians rated the SBCT procedure generally as positive (average: 4.62 ± 0.56). Coverage of fibroglandular tissue in SBCT was generally high (9.82 ± 0.43) and interrater agreement was good (κ = 0.77).Conclusions: Patients experience less pain during spiral breast computed tomography compared to DM, especially in premenopausal women. Imaging is feasible at a high level of anatomical breast coverage and without problems with the clinical workflow. [ABSTRACT FROM AUTHOR]