Search

Understanding the controls on the sulfur isotope compositions of syndepositional pyrite (δ34S py) during early diagenesis is critical for environmental reconstructions, especially for the reconstruction of the marine sulfur cycle. Commonly, δ34S py values increase with depth in marine sediments; this phenomenon has been extensively studied, fostering the reconstruction of both global and regional depositional environments. However, more recently a decrease of δ34S py values with depth has been increasingly observed, but the corresponding controls on sulfur stable isotopes remain poorly constrained. This study investigated a gravity core collected from the northern continental slope of the South China Sea. Morphology, content, and δ34S values of pyrite, concentration and sulfur isotopic composition of porewater sulfate (δ34S SO4), carbon, nitrogen, and sulfur contents, and grain sizes of terrigenous sediments were analyzed and AMS14C dating of planktonic foraminifera was conducted. The δ34S py values were found to decrease with depth from −16.8‰ to −42.8‰, indicating low sulfur isotope fractionation (<38‰) during microbial sulfate reduction in the uppermost sediments and a larger fractionation (>64‰) at greater depth. Significant contributions of relatively 34S-enriched pyrite formed at shallow depth leads to overall δ34S py variations >26‰, whereby low δ34S py values coincide with higher sedimentation rates and higher organic matter supply. This study highlights the potential significance for relatively 34S-enriched, shallow-depth pyrite for δ34S py records, which may affect the reconstruction of depositional conditions and the global sulfur cycle. • Relatively 34S-enriched pyrite formed at shallow depth results from low sulfur isotope fractionation during MSR (<38‰). • Higher sedimentation rate and high organic matter supply led to lower δ34S py values. • Relatively 34S-enriched pyrite formed in uppermost sediments causes overall δ34S py variation >26‰. • δ34S py values provide new insight into the global sulfur cycle and past depositional processes. [ABSTRACT FROM AUTHOR]

The formation of authigenic phosphorus (P) minerals near the sulfate-methane transition (SMT) represents an important pathway of P burial in marine sediments. However, our current understanding of the coupling between the formation of authigenic phosphate and carbon and iron (Fe) cycling is insufficient. In this study, a piston core recovered from the Haima cold seeps of the Qiongdongnan basin, northern South China Sea, was used to analyze pore-water parameters and solid-phase Fe and P speciation. Results from a previous study indicate that the current SMT is located at approximately 1 m below the seafloor (mbsf) and a fossil SMT located at approximately 6.5 mbsf. Dissolved phosphate concentrations and solid-phase iron oxide (Fe Ox) contents are found to decrease with depth, while Fe-bound P (P Fe) and authigenic phosphate (P Auth) contents increase with depth in the zone between the current and fossil SMTs where gas hydrate is present, suggesting that vivianite and authigenic apatite formed in this zone. Gas hydrate below the current SMT will dissociate once methane is undersaturated, which could persistently provide dissolved methane to prevent the downward shift of the current SMT where methane is continually consumed. Such a methane-rich environment maintained by gas hydrate may favor the persistent reduction of Fe Ox and the formation of vivianite. Dissolved phosphate concentrations are high, but decrease rapidly with depth at the fossil SMT. Combined with higher Fe Ox and P Auth contents and lower P Fe contents and lower P Org /total organic carbon (TOC) ratios, these results suggest the formation of authigenic apatite at the fossil SMT. The high dissolved phosphate concentration and low P Org /TOC ratios at the fossil SMT are interpreted to reflect preferential release of P during the degradation of organic matter generated by methanotrophic microorganisms. Overall, our study shows that P speciation in methane-rich sediments provides insight into the formation processes of authigenic P minerals near the SMT and associated carbon and Fe cycling processes. • P and Fe cycling was investigated between the current and fossil sulfate-methane transition (SMT). • An apparent relationship was observed between the occurrence of gas hydrate and the formation of vivianite. • Iron-driven anaerobic oxidation of methane may be the key for a co-occurrence of gas hydrate and vivianite. • Preferential release of P during degradation of organic matter can occur at fossil SMTs. [ABSTRACT FROM AUTHOR]

Graphical abstract Highlights • Sediments from Haima cold seeps have variable compositions. • AOM caused high δ34S CRS and low δ13C TIC values, and high CRS contents. • AOM indicators of sediments are variable under variable methane flux and duration. • Three methane release events were identified in the seep site. Abstract Cold seeps frequently occur at the seafloor along continental margins. The dominant biogeochemical processes at cold seeps are the combined anaerobic oxidation of methane and sulfate reduction, which can significantly impact the global carbon and sulfur cycles. The circulation of methane-rich fluids at margins is highly variable in time and space, and assessing past seepage activity requires the use of specific geochemical markers. In this study, we report multiple sedimentary proxy records for three piston gravity cores (QDN-14A, QDN-14B, and QDN-31) from the Haima seep of the South China Sea (SCS). By combining total organic carbon (TOC), total inorganic carbon (TIC), total nitrogen (TN), total sulfur (TS), acid insoluble carbon and sulfur isotope (δ13C organic carbon and δ34S acid-insoluble), and δ34S values of chromium reducibility sulfur (δ34S CRS), as well as carbon isotopes of TIC (δ13C TIC) in sediments, our aim was to provide constraints on methane seepage dynamics in this area. We identified three sediment layers at about 260–300 cm, 380–420 cm and 480–520 cm sediment depth, characterized by particular anomalies of low δ13C TIC values and high TS content, high TS and CRS contents, and high δ34S acid-insoluble and δ34S CRS values, respectively. On this basis, we propose that these sediment horizons correspond to distinct methane release events preserved in the sediment record. While the exact mechanisms accounting for the presence (or absence) of these particular geochemical signals in the sediment are not known, we propose that they correspond to variations in methane flux and their duration through time. Overall, our results suggest that sedimentary carbon and sulfur and their isotopes are useful tracers for better understanding of methane seepage dynamics over time. [ABSTRACT FROM AUTHOR]

Highlights • Porewater geochemistry of two piston cores in hydrate drilling areas was investigated. • A numerical model was applied to quantify involved biogeochemical processes. • Methane consumed mainly originated from external sources rather than local methanogenesis. • The external methane is most likely to originate from local gas hydrate systems. Abstract Methane of various origins is widespread in the sediments of continental margins, representing a key component of the carbon cycle in the ocean. Its occurrence in shallow marine sediments can be linked to the gas hydrate reservoir in the deep sedimentary column. However, this type of methane is difficult to track due to complex reactions occurred during its long distance migration. Porewater geochemical analyses of two ∼7 m piston cores (D17-15 and W01-16) combined with a reaction-transport model were applied to quantify methane-related biogeochemical processes and to explore the linkage of shallow methane to gas hydrate reservoir in the hydrate drilling areas of Shenhu and Dongsha in the South China Sea (SCS). The model results revealed that anaerobic oxidation of methane (AOM) is the predominant biogeochemical process in both cores, consuming approximately 85% and 74% of sulfate in the modeled domain, respectively. The crossplot of dissolve inorganic carbon (DIC) accumulation versus sulfate depletion of the system suggests that methane consumed during the AOM is mainly originated from external methane sources rather than local methanogenesis. Using a δ13C DIC mass balance calculation together with model-derived fractions of different DIC sources, we estimated that the δ13C value of the external methane in core D17-15 is −66.6‰, which is in accordance with the previous reported δ13C values of hydrate-bound methane in the area. These results suggest that methane consumed in shallow sediments in the hydrate drilling areas of the SCS is mainly originated from local gas hydrate reservoir. The proposed approach has the potential to be used to differentiate the sources of methane, which will provide constraints on dynamics of methane in gas hydrate-bearing marine sediments. [ABSTRACT FROM AUTHOR]

Sulfate-driven anaerobic oxidation of methane (SD-AOM) controls methane release from marine sediments to the ocean. A variety of authigenic precipitates within sediments has been widely used to identify past occurrences of SD-AOM. However, the lack of a systematic evaluation of the formation conditions of these precipitates sometimes impedes the recognition of SD-AOM in past environments characterized by diffusive transport of methane. Carbon, sulfur, and trace element geochemistry of pore-water and sediments was investigated at a site affected by upward methane diffusion in the Shenhu area of the South China Sea. Here, the sulfate-methane transition zone (SMTZ) is located ~7.6 m below the seafloor based on sulfate and methane concentrations. The slope of δ34S vs. δ18O values of sulfate is consistent with diffusive transport of methane. Concentration and isotope profiles of pore-water species point to diffusive rather than advective transport of solutes. Enhanced sulfate reduction inferred from δ34S values of sulfate agrees with the local occurrence of relatively abundant, 34S-enriched iron sulfide minerals. The time required to produce the observed authigenic iron sulfides around the SMTZ is estimated to be ~1.1 ka based on the amount of iron sulfide minerals and the present diffusive flux of sulfate. No enrichment of authigenic carbonate, barium (Ba), and molybdenum (Mo) was detected in the studied sediments. This observation is consistent with the calculation that the current fluxes of pore-water calcium, magnesium, Ba, and Mo are too low to allow for authigenic enrichments. The low fluxes are largely controlled by diffusion, which facilitates the formation of 34S-enriched iron sulfide minerals. The observed enrichment patterns – unlike those of sediments affected by advective seepage – are expected to be prevalent in modern and ancient continental-margin sediments, and may contribute to the identification of past methane-rich zones and overlying SD-AOM zones as sinks for methane in the geological record. [ABSTRACT FROM AUTHOR]