Search

Halide perovskite/crystalline silicon (c-Si) tandem solar cells promise power conversion efficiencies beyond the limits of single-junction cells. However, the local light-matter interactions of the perovskite material embedded in this pyramidal multijunction configuration, and the effect on device performance, are not well understood. Here, we characterize the microscale optoelectronic properties of the perovskite semiconductor deposited on different c-Si texturing schemes. We find a strong spatial and spectral dependence of the photoluminescence (PL) on the geometrical surface constructs, which dominates the underlying grain-to-grain PL variation found in halide perovskite films. The PL response is dependent upon the texturing design, with larger pyramids inducing distinct PL spectra for valleys and pyramids, an effect which is mitigated with small pyramids. Further, optimized quasi-Fermi level splittings and PL quantum efficiencies occur when the c-Si large pyramids have had a secondary smoothing etch. Our results suggest that a holistic optimization of the texturing is required to maximize light in- and out-coupling of both absorber layers and there is a fine balance between the optimal geometrical configuration and optoelectronic performance that will guide future device designs.

Mixed lead-tin halide perovskites have sufficiently low bandgaps (∼1.2 eV) to be promising absorbers for perovskite-perovskite tandem solar cells. Previous reports on lead-tin perovskites have typically shown poor optoelectronic properties compared to neat lead counterparts: short photoluminescence lifetimes (

Summary Monolithic [Cs0.05(MA0.17FA0.83)0.95]Pb(I0.83Br0.17)3/Cu(In,Ga)Se2 (perovskite/CIGS) tandem solar cells promise high performance and can be processed on flexible substrates, enabling cost-efficient and ultra-lightweight space photovoltaics with power-to-weight and power-to-cost ratios surpassing those of state-of-the-art III-V semiconductor-based multijunctions. However, to become a viable space technology, the full tandem stack must withstand the harsh radiation environments in space. Here, we design tailored operando and ex situ measurements to show that perovskite/CIGS cells retain over 85% of their initial efficiency even after 68 MeV proton irradiation at a dose of 2 × 1012 p+/cm2. We use photoluminescence microscopy to show that the local quasi-Fermi-level splitting of the perovskite top cell is unaffected. We identify that the efficiency losses arise primarily from increased recombination in the CIGS bottom cell and the nickel-oxide-based recombination contact. These results are corroborated by measurements of monolithic perovskite/silicon-heterojunction cells, which severely degrade to 1% of their initial efficiency due to radiation-induced recombination centers in silicon., Graphical Abstract, Highlights • Halide perovskite sub-cells exhibit strong proton irradiation resiliency • Novel operando characterization distinguishes degradation of individual sub-cells • Perovskite/CIGS tandem solar cells retain 85% of their initial efficiency after irradiation • Perovskite/SHJ tandem solar cells degrade to 1% of their initial efficiency after irradiation, Context & Scale Monolithic perovskite/silicon and perovskite/CIGS tandem solar cells could facilitate large-scale decarbonization of the power sector, provided their long-term stability is proven. In this work, we test the stability of both technologies under high-energy proton irradiation. While this mimics the radiation environment in space, our versatile operando and ex situ methodology is also suitable for studying the long-term stability of multijunction solar cells for terrestrial applications. We find that perovskite/silicon tandem solar cells are unsuitable for space, whereas perovskite/CIGS tandems are radiation-hard, promising cheap, flexible, and ultra-lightweight space photovoltaics. Both the growing demand for smaller, cheaper satellites and the privatization of space exploration are revolutionizing space economics, providing an ideal niche for the commercialization of this new technology until the levelized cost-of-electricity can compete with current terrestrial photovoltaics., We propose and test monolithic perovskite/CIGS tandem solar cells for readily stowable, ultra-lightweight space photovoltaics. We design operando and ex situ measurements to show that perovskite/CIGS tandem solar cells retain over 85% of their initial power-conversion efficiency after high-energy proton irradiation. While the perovskite sub-cell is unaffected after this bombardment, we identify increased non-radiative recombination in the CIGS bottom cell and nickel-oxide-based recombination layer. By contrast, monolithic perovskite/silicon-heterojunction cells degrade to 1% of their initial efficiency due to radiation-induced defects in silicon.

The authors thank the Engineering and Physical Sciences Research Council (EPSRC) for support (EP/R023980/1). Z.A.-G. acknowledges funding from a Winton Studentship, and ICON Studentship from the Lloyd’s Register Foundation. S.D.S acknowledge the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (HYPERION, Grant Agreement No. 756962), and the Royal Society and Tata Group (UF150033). M.A.-J. thanks Cambridge Materials Limited, Wolfson College, University of Cambridge, and EPSRC for their funding and technical support. F.U.K. thanks the Jardine Foundation and Cambridge Trust for a doctoral scholarship. This work was carried out with the support of the Diamond Light Source, instrument I09 (proposal SI22668-1). The research leading to this result has been supported by the project CALIPSOplus under Grant Agreement 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020. H.R., G.J.M. and U.B.C. acknowledge research funding from the Swedish Research Council (Grant nos. VR 2018-04125, 2018-06465, and 2018-04330), the Swedish Foundation for Strategic Research (Project no. RMA15-0130) and the Swedish Energy Agency (Grant no. P43549-1).